(24.8) Faston termination Flachsteckeranschluss entsprechend DIN 46244/Teil 2 according to DIN 46244/part 2 iS 254 le 4 x [2.54] = 10,16 Leiterplatten Oberkante Schichtoufbau im metallisierten Loch siehe Zeichnung 114124 diameter of drilled hole see drawing 114124 10 of Durchmesser des metollisierten Loches @ 10 Oo, Diameter of finished plated-through hale Leiterplattenbohrbild " 115+ 0,025 Bohrungsdurchmesser des Loches PCB drillhole pattern @ 115+ 0025Diameter of chiled hole 07 4 x 254 = 10,16 ; . . ohne Mutter Dieser Bereich mufi gleiches without nut Potential auf LP-Oberflaiche M3 haben This area must have some M4. elecirical potential an surface of PCB 6-32UNC 8-32UNC Ident-Nr. | Gewinde ( alle Lacher/all holes) Part No. | thread Information: Tolerances ep 5:1 | Al Dimensions In mm AIL rights reserved. Subject tu modification without | Designation Onl: informati prior notice. _nni_ 0 To Thsure that this is the latest Drawing will not be updated. SVA 0 pol Flachstecker 45 version of this drawing, please contact one of the ERN companies Pi ower bug 10-pin-Fi as fon 45 _ = ww ERNLcom 14,4,000 . g Index Date V:00069217.SZA EPSVA protection memo from DIN 34 Consider