3706-5020 - 3M - Product.Network



Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™Accessories

.100” × .100” seireS 6073/5073metsyS IME

Physical

* RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values

in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent

chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,

this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.

Shell

Material:Die Cast Aluminum Alloy

Plating: 200 μ” [ 5.08μm] Minimum Nickel

Latch

Material:Stainless Steel

Plating: 100 μ” [ 2.54μm] Minimum Nickel

Cable Clamp

Material:Copper Alloy

Plating: 75 μ” [ 1.91μm] Minimum Nickel

Receptacle

Insulation Material:Glass Filled Polyester (PBT)

Flammability Rating: UL 94V-0

Ground Plate

Material:Copper Alloy

Plating: 100 μ” [ 2.54μm] Minimum Nickel

Retaining Clip

Material:Stainless Steel

Plating: 100 μ” [ 2.54μm] Minimum Nickel

•Spring latch attachment allows quick, easy connect/

disconnect

•Fits existing 3M™ connectors

•Intra-cabinet grounding eliminates pigtails/

drain wires and need for grounding clamps

•Cast aluminum shell offers excellent ground for

EMI/ ESD

•RoHS* compliant

TS-0098-B

Sheet 1 of 4

Date Modified: July 18, 2008

DISCONTINUED

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Accessories

.100″ × .100″ EMI System 3705/3706 Series

Position Dimensions

A B C D E F

20 1.69 [ 42.9 ] 1.50 [ 38.1 ] 0.39 [ 9.9 ] 1.26 [ 32.0 ] 1.65 [ 41.9 ] 0.35 [ 8.9 ]

26 1.99 [ 50.5 ] 1.80 [ 45.7 ] 0.43 [ 10.9 ] 1.26 [ 32.0 ] 1.65 [ 41.9 ] 0.35 [ 8.9 ]

34 2.39 [ 60.7 ] 2.20 [ 55.9 ] 0.47 [ 11.9 ] 1.32 [ 33.5 ] 1.71 [ 43.4 ] 0.47 [ 11.9 ]

40 2.69 [ 68.3 ] 2.50 [ 63.5 ] 0.51 [ 13.0 ] 1.32 [ 33.5 ] 1.71 [ 43.4 ] 0.47 [ 11.9 ]

50 3.19 [ 81.0 ] 2.80 [ 71.1 ] 0.59 [ 15.0 ] 1.38 [ 35.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ]

60 3.69 [ 93.7 ] 3.30 [ 83.8 ] 0.67 [ 17.0 ] 1.38 [ 35.1 ] 1.77 [ 45.0 ] 0.47 [ 11.9 ]

Notes:

1.Two Shell Halves: Aluminum Alloy Die Casting, Plating-200μ″ [ 5.0 μm ] Nickel Min.

2.One Cable Clamp: Copper Alloy, Plating 75μ″ [ 2.0 μm ] Nickel Min.

3.Two Latches: Stainless Steel, Plating 100μ″ [ 2.54 μm ] Nickel Min.

4.Two Roundhead Screws: M3 x 0.5 mm x 4 mm long.

5.Two Flathead screws: M3 x 0.5 mm x 6 mm Long.

Note: Wiremount Shell Kit to be used with res pective Socket and Cable (Order Separately) TS-0098-B

Sheet 2 of 4

Ordering Information

3705-A2XX

Position: Se e Table

Shell Kit

.0 .00 .000

inch ±.1 ±.01 ±.005

[ ] Dim ensions fo r R eference

Only

Tolerance Unless Noted

[mm]

Inch

.43

[ 10.9 ]

4X R .18

[ 4.6 ]

.43

[ 10.9 ] See Note 1

For 34 position and

higher the shel l thickness

increases to the dashed

line (See table Dim F).

.35

[ 8.9 ]

See Note 2

2X (See Note 4)

2X (See Note 5)

2X (See Note 3)

DISCONTINUED

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Accessories

.100″ × .100″ EMI System 3705/3706 Series

Position Dimensions

A B C D E

20 1.53 [ 38.9 ] 1.98 [ 50.3 ] 2.36 [ 59.9 ] 1.41 [ 35.8 ] 1.79 [ 45.5 ]

26 1.83 [ 46.5 ] 2.28 [ 57.9 ] 2.66 [ 67.6 ] 1.71 [ 43.4 ] 2.09 [ 53.1 ]

34 2.23 [ 56.6 ] 2.69 [ 68.3 ] 3.06 [ 77.7 ] 2.11 [ 53.6 ] 2.49 [ 63.2 ]

40 2.53 [ 64.3 ] 2.98 [ 75.7 ] 3.36 [ 85.3 ] 2.41 [ 61.2 ] 2.79 [ 70.9 ]

50 3.03 [ 77.0 ] 3.48 [ 88.4 ] 3.86 [ 98.0 ] 2.91 [ 73.9 ] 3.37 [ 85.6 ]

60 3.53 [ 89.7 ] 3.98 [ 101.1 ] 4.36 [ 110.7 ] 3.41 [ 86.6 ] 3.87 [ 98.3 ]

TS-0098-B

Sheet 3 of 4

.71

[ 18.0 ]

.32

[ 8.1 ]

Notes:

1.One Bracket: PBT, Flammability Rating: UL 94V-0.

2.Two Ground Plates: Copper Alloy, Plating-100 μ″ [ 2.54 μm ] Nickel Min.

3.Two Retaining Clips: Stainless Steel, Plating-100 μ″ [ 2.54 μm ] Nickel Min.

4.Two Roundhead Screws: M3 x 6mm Long.

5.Two Roundhead Screws: M3 x 0.5mm x 10mm Long. (For use with Plug Connector).

6.This is the recommended distance from the inside of th e panel to the front face of the Header or Plug.

Ordering Information

Note: Panel Mount Receptable Kit to be used with respective Plug or Header (Order Separately).

3706-50XX

Position: See Table

Receptacle Kit

2X (See Note 2)

4X M3 X 0.5mm

Threaded Inserts

.40 Ref

[ 10.2 ]

(See Note 6)

2X (See Note 3)

2X (See Note 4)

See Note 1

.37

[ 9.4 ] .70

[ 17.8 ]

2X (See Note 5)

2X Stop

DISCONTINUED

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ Accessories

.100″ × .100″ EMI System 3705/3706 Series

Position Dimensions

A B

20 1.80 [ 45.7 ] 1.98 [ 50.3 ]

26 2.10 [ 53.3 ] 2.28 [ 57.9 ]

34 2.50 [ 63.5 ] 2.69 [ 68.3 ]

40 2.80 [ 71.1 ] 2.98 [ 75.7]

50 3.30 [ 83.8 ] 3.48 [ 88.5 ]

60 3.80 [ 96.5 ] 3.98 [ 101.1 ]

Position 3705

Shell Kit

For use with:

(Order Separately) 3706

Mates with:

Receptacle Kit

For use with:

(Order Separately)

Socket Cable Header Plug

20 3705-A220 3421-7620 3659/20 3706-5020 2520-500X 4620-6000

26 3705-A226 3399-7626 3659/26 3706-5026 2526-500X 4626-6000

34 3705-A234 3414-7634 3659/34 3706-5034 2534-500X 4634-6000

40 3705-A240 3417-7640 3659/40 3706-5040 2540-500X 4640-6000

50 3705-A250 3425-7650 3659/50 3706-5050 2550-500X 4650-6000

60 3705-A260 3334-7660 3659/60 3706-5060 2560-500X 4660-6000

TS-0098-B

Sheet 4 of 4

Note:

Shell and Receptacle Kits are availabl e. T hey consist of a complete Shell Kit and a complete Receptacle Kit for a respective pin count.

.13

[ 3.3 ]

R Full Typ

.49

[ 12.4 ]

R .008 Typ

[ 0.20 ]

.50 Min

[ 12.7 ]

.75 Min

[ 19.1 ]

R .063 Typ

[ 1.60 ]

Recommended Panel Cut

Out for Receptacle Ki t.

DISCONTINUED

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by

EU Court of Justice Decision 2008/C 116/04

This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for ﬁnished

products subject to EU RoHS that are placed on the EU market after June 30, 2008.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.

RIA-2217A-E

DISCONTINUED

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the

product or part does not contain any of the following substances in excess of the following maximum concentration values in any

homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated

diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain

Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or

polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in

writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217A-E

DISCONTINUED

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,

BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty

period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where

prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the

legal theory asserted.

Please recycle. Printed in USA.

RIA-2217A-E

3M Electronics Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3m.com/interconnects 3M is a trademark of 3M Company.

Appendix C3: China RoHS