The World's Most Advanced Passive Components EMI/EMC Components - Data Line Filters NZ Series Solid Chip Noise Suppressors (N1608Z ~ N5750Z) Multi-layered Chip Impedance Array Three-Terminal EMI Chip Filters Chip Varistor EMI Suppressor Sheets - "Flex Suppressor" EMC Chip Filters (M-500 Series) DC Line Filters - SBP Series SBT Coils Data Line Filters Bead Inductors DIP Noise Filters SN Coils - SNT Series EMC Beads www.tokin.com TOKIN AMERICA 155 Nicholson Lane * San Jose, CA 95134 Tel: 408.432.8020 Fax: 408.434.0375 EMI / EMC Components - Data Line Filters NZ Series Solid Chip Noise Suppressors (N1608Z N5750Z) The NZ Series covers a wide range of impedance characteristics, from bead inductors to toroidal chips. These chip inductors have complete monolithic structures that are designed to prevent electromagnetic interference. Features Applications computers, work stations, office * Personal computers, electronic diaries, and other microcomputer related equipment peripherals and terminals * Computer of noise emissions from these * Prevention types of electronic equipment: of loopback and spurious radia* Prevention tion of unnecessary signals from clock be soldered either flow or reflow * Can and reel packaging that conforms * Tape oscillators with EIA standards Prevention of loopback and spurious radia* Two different materials (High Q, High Loss) * are also available with EIA0603, 0805 tion of unnecessary signals from various interfaces, excluding RGB and composite video signals package size Specifications Dimensions (mm) L Model Typical Impedance () W S S T [mm] 2 TOKIN AMERICA Rated DC Current Resist(mA) ance () max Remarks L W T S N1608ZA300 30 at 100MHz 100 0.4 High Loss type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608ZA800 80 at 100MHz 100 0.5 High Loss type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608ZA331 330 at 100MHz 100 0.6 High Loss type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608ZA601 600 at 100MHz 100 0.8 High Loss type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608ZA102 1000 at 100MHz 100 1.2 High Loss type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608ZA202 2000 at 60Mhz 100 1.8 High Loss type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608Z300 30 at 100MHz 100 0.1 High Q type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608Z800 80 at 100MHz 100 0.2 High Q type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608Z121 120 at 100MHz 100 0.2 High Q type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608Z301 300 at 100MHz 100 0.3 High Q type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608Z601 600 at 100MHz 100 0.5 High Q type 1.60.15 0.80.15 0.80.15 0.1 (min.) N1608Z102 1000 at 100MHz 100 0.7 High Q type 1.60.15 0.80.15 0.80.15 0.1 (min.) N2012ZA800 80 at 100MHz 300 0.2 High Loss type 2.00.2 1.20.3 1.00.3 0.2 (min.) N2012ZA121 120 at 100MHz 300 0.2 High Loss type 2.00.2 1.20.3 1.00.3 0.2 (min.) N2012ZA601 600 at 100MHz 200 0.5 High Loss type 2.00.2 1.20.3 1.00.3 0.2 (min.) N2012ZA102 1000 at 60MHz 100 1.0 High Loss type 2.00.2 1.20.3 1.00.3 0.2 (min.) N2012Z260 26 at 100MHz 600 0.05 High Q type 2.00.2 1.20.3 1.00.3 0.3 (min.) N2012Z121 120 at 100MHz 300 0.3 High Q type 2.00.2 1.20.3 1.00.3 0.3 (min.) N2012Z221 220 at 100MHz 200 0.4 High Q type 2.00.2 1.20.3 1.00.3 0.3 (min.) N2012Z301 300 at 100MHz 200 0.4 High Q type 2.00.2 1.20.3 1.00.3 0.3 (min.) N2012Z601 600 at 100MHz 200 0.6 High Q type 2.00.2 1.20.3 1.00.3 0.3 (min.) N2012Z102 1000 at 100MHz 100 1.0 High Q type 2.00.2 1.20.3 1.00.3 0.3 (min.) N2012Z202 2000 at 60MHz 100 1.2 High Q type 2.00.2 1.20.3 1.00.3 0.3 (min.) N3216Z800 80 at 100MHz 100 0.5 3.20.2 1.60.2 1.60.2 0.3 (min.) N3216Z151 150 at 100MHz 100 0.3 3.20.2 1.60.2 1.10.3 0.3 (min.) N3216Z501 500 at 100MHz 100 0.5 3.20.2 1.60.2 1.10.3 0.3 (min.) N3216Z122 1200 at 50MHz 100 1.0 3.20.2 1.60.2 1.350.3 0.3 (min.) N3216Z202 2000 at 30MHz 100 1.5 3.20.2 1.60.2 1.60.3 0.3 (min.) N3216ZP500T25 50 at 100MHz 2500 0.02 3.20.2 1.60.2 1.350.3 0.3 (min.) N4516ZP600T60 60 at 100MHz 6000 0.02 4.50.3 1.60.3 1.30.2 0.3 (min.) N4516Z600 60 at 100MHz 2500 0.04 4.50.3 1.60.3 1.30.2 0.3 (min.) N4516Z800 80 at 100MHz 600 0.08 4.50.3 1.60.3 1.30.2 0.3 (min.) N4532ZP121T60 120 at 100MHz 6000 0.02 4.50.3 3.20.3 1.50.3 0.3 (min.) N5750Z501 500 at 100MHz 3000 0.04 5.70.3 5.00.3 1.60.2 0.3 (min.) 155 Nicholson Lane * San Jose, CA 95134 Tel: 408.432.8020 Fax: 408.434.0375 www.tokin.com EMI / EMC Components - Data Line Filters Multi-layered Chip Impedance Array Surface mounted EMI countermeasure components that suppress noise on three or four lines in one chip, making them ideal for high density circuit design. Features Compact size and wide range of specifications. Triple in-line packages: 30, 120, 200, 3030, 600, 1000 Quadruple in-line packages: 30, 120, 200, 300, 600, 1000 Features Personal computers, work stations, office computers, electronic diaries, and other microcomputer related equipment. Computer peripherals and terminals. Prevention of noise emissions from various electronic equipment. Prevention of loopback and spurious radiation of unnecessary signals from clock oscillators and various other interfaces, excluding RGB and composite video signals. Circuit Diagram * 3 Line Shapes and Dimensions * 3 Line 1.6 0.2 3.2 0.2 Markings 0.9 0.2 0.8 max. N * 4 Line 3216 A3 Z 300 T 01 Rated current Packaging Method (B or T) Impedance Material Circuit Number Dimensions * 4 Line 1.6 0.2 3.2 0.2 Series 0.9 0.2 0.4 max. Specifications * 4 Line * 3 Line Impedance () DC Resistance ( (m) ) Max. Rated Current (mA) Operating Temperature (C) Storage Temperature (C) 10000 N3216A3Z601 N3216A3Z30001 25 min. at 100MHz 100 100 N3216A3Z12101 120 25% at 100MHz 200 100 N3216A3Z20101 200 25% at 100MHz 300 100 N3216A3Z30101 300 25% at 100MHz 450 100 N3216A3Z60101 600 25% at 100MHz 500 100 N3216A4Z10201 1000 25% at 100MHz 800 N3216A4Z12101 120 25% at 100MHz 200 N3216A4Z20101 200 25% at 100MHz 30 0 N3216A4Z30101 300 25% at 100MHz 450 - 55C 125C 100 N3216A3Z601 1000 100 100 10 R X 100 600 25% at 100MHz 500 100 1000 25% at 100MHz 800 100 1 10000 Z 100 10 R X 1 1 N3216A4Z60101 1000 N3216A4Z601 1000 Z 100 100 Frequency (MHz) 10000 - 55C 125C 0.1 0.1 1 155 Nicholson Lane * San Jose, CA 95134 10 100 1000 10000 Frequency (MHz) Tel: 408.432.8020 Fax: 408.434.0375 10 0.1 10 * 4 Line 100 N3216A4Z102001 TOKIN AMERICA X 100 1 1 10000 100 R 0.1 Impedance () 25 min. at 100MHz 100 10 N 1000 Z 1 * 3 Line Impedance () N3216A4Z30001 Impedance () 1000 Impedance () Model 10000 1 10 100 1000 10000 Frequency (MHz) www.tokin.com 3 EMI / EMC Components - Data Line Filters Three-Terminal EMI Chip Filters (E4525T Series) Features * * * e g 1 e Bottom surface Top surface This three-terminal noise suppressor is surface mounted type and is used to eliminate spurious noise from high speed data lines of electronic equipment. 4.5 0.3 W 2.5 0.3 T 1.4 0.3 Polarity marking g 1.0 0.3 T e 0.1 min. W Rated voltage DC (V) Rated current DC (mA) Withstand voltage DC (V) Insulation resistance (M) min. Operating temperature range C 50 200 125 104 -40 +85 Model 3 E4525T300 E4525T500 E4525T101 E4525T181 Noise Source 2 L Side surface Circuit Construction 1 Dimensions (mm) 3 2 101 * * * * Applications High attenuation over a wide band Clock signal lines (5 to 60MHz) Available in 4 models to suit the EMI High resolution video signal lines suppression effect ideal to your needs EMI suppression of secondary signals Superior cicuit matching characteristics Can be soldered by flow or flow or reflow machines L Static capacitance pF 30 60 110 190 Inductance nH 25 25 25 25 Attenuation (dB) / Frequency (MHz) OdB 3dB 10dB 70 210 370 30 110 220 20 60 140 10 30 90 Note: Tape and Reel Packaging is available. Three-Terminal EMI Chip Filters (E3216T Series) 3.2 0.3 Tokin has implemented compact and high-performance terminal noise suppressers (measuring 3.2L x 1.6W x 2.5T mm) by using low-temperature burned ceramics. Side surface (marking side) 02 Identification code 1.6 0.3 Features * * Polarity marking Has a pitch width of 1.6 mm, parallel mountable on ICs with 2.54mm pitches Requires about the one-half the mounting area compared with E4525T series (low-profile type), allowing high density packaging 1 Rear surface 2 3 2.5 0.3 0.1 min. 0.8 0.3 Applications Circuit Construction 1 3 signal circuits (5 to 60MHz) * Clock circuits for super-high-resolution videos * I/O (EGA, VGA, ULTRA, VGA, etc.) * Noise elimination for signal circuits 0.1 min. Side surface [mm] 0.1 min. Specifications Note: Tape and Reel Packaging is available. 2 50 4 TOKIN AMERICA Rated current DC (mA) Withstand voltage DC (V) Insulation resistance (M) min. DC resistance (m) max. Operating temperature range (C) 500 125 104 300 -25 +85 Model Static capacitance (pF) Inductance (nH) E3216T100 E3216T200 E3216T400 E3216T800 E3216T181 10 20 45 85 190 11 17 37 37 37 155 Nicholson Lane * San Jose, CA 95134 Attenuation (dB) / Frequency (MHz) 10dB 20dB Rated voltage DC (V) (1250 2000) 710 2000 360 1000 220 1000 120 1000 Tel: 408.432.8020 Fax: 408.434.0375 Code Noise Source (1500) 970 530 350 210 www.tokin.com 01 02 07 10 12 EMI / EMC Components - Data Line Filters Three-Terminal EMI Chip Filters (E3216C Series) Features Applications Three terminal construction enables noise suppression at high frequencies Ceramic single-plate construction provides high reliability Plated electrodes insure excellent solder dip resistance Personal computers and peripherals Automotive electronics Noise immunity for TV's and VCR's Countermeasure against spurious noise interference in wireless communications equipment This three-terminal chip ceramic capacitor boasts excellent high frequency characteristics. Its small size and surface-mount configuration make it ideal as a countermeasure against high frequency spurious noise. Specifications Circuit Construction Input Output Shape and Dimensions 3.2 0.2 (mm) 0.4 0.3 Electrostatic Capacity (pF) Model 1.6 0.2 Capacitance/ Tolerance (pF) Rated Voltage DC (V) 1.0 0.3 0.4 0.3 Rated current AC (mA) Dielectric resistance (M) min. 220 1000 100 E3216C101 E3216C221 220 E3216C471 470 E3216C102 1000 E3216C222 2200 50% 20 25 Three-Terminal EMI Chip Filters (E3216RA/RB Series) These RC filters are T-type filters which include a resistor added to a line of three-terminal chip ceramic capacitors, resulting in superior high frequency characteristics. Features Provides attenuation over a wider range as a result of the addition of a capacitor to a three-terminal chip capacitor Allows noise elimination up to high frequency range as a result of a three-terminal construction with superior frequency responses High reliability because of the use of ceramics Adopts plated terminal electrodes with superior solderability and solder heat resistance Dimensions Applications Countermeasures against noise emitted from personal computers or OA equipment 3.20.2 Specifications 1.5 max. 0.40.3 E 3216 1.00.3 RA 0.40.3 101 Numbering System Electrostatic capacity RA : 100 RB : 50 Dimensions Series name Taping (2000pcs. / reel) TOKIN AMERICA DC (W) Rated current DC (mA) Insulation resistance (M) min. 1/16 25 10 Operating temperature range (C) Capacitance allowance (%) Resistance allowance (%) -25 +85 +50 -20 30 3 Model Capacitance (pF) DC resistance () E3216RA221 220 100 E3216RA101 100 100 E3216RA470 47 100 E3216RA220 22 100 E3216RB221 220 50 E3216RB101 100 50 E3216RB470 47 50 E3216RB220 22 50 Note: Tape and Reel Packaging is available. ATTENUATION CHARACTERISTICS (DB) 1.60.2 Three-terminal Capacitor type 0 RC type 10 20 30 40 50 60 1M 155 Nicholson Lane * San Jose, CA 95134 Tel: 408.432.8020 Fax: 408.434.0375 10M 100M 1G FREQUENCY (MHz) www.tokin.com 5 EMI / EMC Components - Data Line Filters Chip Varistor Specifications SMD Type Chip Varistor provides highly reliable surface mount application. Rated current Part No. Vw (DC) (V) Features High surge resistance: 100 to 270A ZnO ceramic varistor Applications ESD countermeasures, burst noise protection measures Signal I/O, motor drive circuits Shapes and Dimensions T W L C Vw (AC) (V) Varistor Voltage at 10A (1mA DC) Va (V) Maximum Input Voltage (8/20 s) Vc (V) Maximum Surge Voltage (8/20 s) Ia (A) V2012A3R5J 3.5 2.5 3.7 5.5 14 100 0.3 V2012A5R5J 5.5 4.0 7.1 9.3 16 150 0.4 V2012A140J 14 10 15.9 20.3 30 150 0.4 V2012A180J 18 14 22.5 28.0 40 250 0.8 V2012A260J 26 20 29.5 38.5 56 250 1.2 V2012A330J 33 26 38.0 45.0 72 180 0. 8 V2012A420J 42 30 46.0 56.0 86 180 0. 8 V2012A560J 56 40 61.0 76.0 110 180 1.0 V2012A680J 68 50 76.0 90.0 130 180 1.0 V3216A3R5J 3.5 2.5 3.7 5.5 14 130 0.4 V3216A5R5J 5.5 4.0 7.1 9.3 16 180 0.6 V3216A140J 14 10 15.9 20.3 30 180 0.6 V3216A180J 18 14 22.5 28.0 40 270 1.0 V3216A260J 26 20 29.5 38.5 56 270 1.5 V3216A330J 33 26 38.0 45.0 72 210 0.9 V3216A420J 42 30 46.0 56.0 86 210 0.9 V3216A560J 56 40 61.0 76.0 110 210 1.3 V3216A680J 68 50 76.0 90.0 130 210 1.3 (mm) MAXIMUM VOLTAGE [V] L W T 2.0 0.2 1.25 0.2 1.0 0.2 MAXIMUM CLAMPING VOLTAGE 3.2 0.2 1.60 0.2 1.3 0.2 10 10uA 100uA 1mA 10mA 100mA CURRENT 1A 10A 100A 1uA MAXIMUM VOLTAGE [V] 0.2 10uA 1mA 10mA 100mA 1A 10A TOKIN AMERICA 155 Nicholson Lane * San Jose, CA 95134 100A MAXIMUM CLAMPING VOLTAGE V3216A180 100A 1uA 10uA 100uA MAXIMUM LEAKAGE 1mA 10mA 100mA 1A 10A 100A CURRENT MAXIMUM VOLTAGE [V] Series 10A V3216A260 10 100uA CURRENT 1000 1A V3216A420 V3216A330 V2012A180 1uA Internal code Packing B : Bulk T, L : Reel Termination J : Nickel barrier Maximum continuous working voltage 3R5 : 3.5V Materials Size Dimension 2012 : 2.0 1.2mm 3216 : 3.2 1.6mm 1mA 10mA 100mA CURRENT 100 V2012A260 10 100uA MAXIMUM LEAKAGE V2012A420 V2012A330 Markings 10uA MAXIMUM VOLTAGE [V] MAXIMUM CLAMPING VOLTAGE 100 J MAXIMUM CLAMPING VOLTAGE V3216A680 V3216A560 MAXIMUM LEAKAGE 3R5 MAXIMUM LEAKAGE 0.1 1uA 6 100 2000 100 V2012A140 V2012A5R5 V2012A3R5 1 2012 A 100 2000 C min. 10 V Cp (pF) MAXIMUM VOLTAGE [V] 1000 MAXIMUM LEAKAGE N3216 Capacitance at f=1MHz Impedance Characteristics (Reference Data) 100 N2012 Maximum Surge Energy (10/1000 s) Wa (J) MAXIMUM VOLTAGE [V] MAXIMUM CLAMPING VOLTAGE 100 100 MAXIMUM LEAKAGE 10 V2012A680 V2012A560 MAXIMUM CLAMPING VOLTAGE V3216A140 V3216A5R5 V3216A3R5 1 10 1uA 10uA 100uA 1mA 10mA 100mA CURRENT 1A 10A 100A Tel: 408.432.8020 Fax: 408.434.0375 1uA 10uA 100uA 1mA 10mA 100mA CURRENT 1A www.tokin.com 10A 100A EMI / EMC Components - Data Line Filters EMI Suppressor Sheets - "Flex Suppressor" Soft magnetic sheets designed to efficiently suppress a wide range of high frequency radiation noise generated in various electronic equipment. They can serve as excellent EMC suppressors of high frequency noise difficult to countermeasure with conventional ferrite/ ceramic materials. Features Features Type and Specifications Type Standard Thickness (mm) 0.5 K4E 1.0 Structure Operating Temperature (C) Standards Listed Single Layer 20 to 80 UL94-V1 Standard size (mm) Applications 25 15 ASIC, IC, etc. 50 20 Flat cable, clock generator, etc. 70 50 PC, workstation, etc. 210 150 ATM, etc. Characteristics * Attenuation level for transmission noises REF -20.0dBm 10dB/DIV When and where Flex Suppressor sheets are used: Case 1: To suppress noise generated by casing. Case 2: To suppress noise generated between PCB boards. Case 3: To suppress unwanted radiation of noises from LSI, IC and cables. ATT 10dB * Attenuation level for coupling noises REF -20.0dBm 10dB/DIV ATT 10dB Without sheet K4E (0.5mm thick) K4E (1.0mm thick) Copper Foil K4E (0.5mm thick) RWB 1 MHz VBW 1 kHz SWP 2s START 100 MHz Without sheet Coupling (dB) Radiation noise suppression in all kinds of electronic equipment Intra-system application to suppress noises in quasi microwave ranges Virtually no limitation to where it can be used: mobile communications equipment, wireless equipment (BS, CS tuners), office automation equipment (personal computers, TFT LCD's, etc.), communications terminals in audio audio/video equipment, digital exchanges, etc. Transmission (dB) Usable in quasi microwave ranges - can be used in high-speed clocks (100 MHz to 3 GHz) Thin (0.3 to 2mm), flexible material - can be used in portable equipment Virtually no limitation to where it can be used. Easy to process, suitable for a wide variety of applications, available in custom sizes High electrical resistance (106 to 108 ohms) functions as an absorber Includes non-conductive adhesive backing Copper Foil STOP 1100 MHz RWB 1 MHz VBW 1 kHz SWP 2s K4E (1.0mm thick) START 100 MHz Frequency (MHz) STOP 1100 MHz Frequency (MHz) Apply directly to casing (Case 1) Apply between boards (Case 2) Measurement Method Amount of attenuation for transmission noises LSI & IC - Apply directly to top surface Caution: Thermal conductivity (Typ: 4.33 10-4 cal/cm . s . C) (Case 3) Amount of attenuation for coupling noises Loop antenna Loop antenna Apply directly to flat cable. (Case 3) Wrap around cable. Caution: Must be covered with heat shrink material. (Case 3) TOKIN AMERICA 155 Nicholson Lane * San Jose, CA 95134 Tel: 408.432.8020 Fax: 408.434.0375 www.tokin.com 7 EMI / EMC Components - Data Line Filters EMC Chip Filters (M-500 Series) Applications Features The key to suppressing radiated noise emissions generated by electronic equipment and systems is the successful application of effective countermeasures at the data lines. To answer your need for high-performance EMC components for designing data lines between central processing units and terminals, Tokin has developed outstanding compact filters that enable easy surface mounting. FM/AM tuners, VTR/VCRs * TVs, Personal computers, equipment using * microcomputers, peripheral terminals Data terminals * be mounted using flow or reflow * Can soldering ideal countermeasure against * The common-mode noise in the signal * transmission lines of data communications terminals and digital equipment Highly effective in suppressing radiated emissions per FCC, VDE and VCCI standards. Specifications Model Bulk Model Tape & Reel M-520C M-521C M-522C M-532C M-538C M-540C M-542C M-520CT M-521CT M-522CT M-532CT M-538CT M-540CT M-542CT Frequency Range (MHz) Rated Current (mA) 20 300 1 300 20 300 20 300 20 300 20 300 20 300 1000 1000 1000 500 100 100 500 Remarks 2 2 2 3 3 4 4 line line line line line line line Common Common Common Common Common Common Common mode mode mode mode mode mode mode (Molded) (Non-Molded) (Non-Molded) (Non-Molded) (Non-Molded) (Molded) (Non-Molded) Dimensions (mm) M-520C M-521C, M-522C M-532C, M-538C 9.0 9.0 1 4 3 1.2 2.54 1 4 5.0 2 3 2.54 1 6 1 8 1 8 9.8 2 5 2 7 2 7 2.54 3 6 9.8 3 6 4 5 4 5 9.8 4 2.54 Lot No. 1.2 5.5 5.6** 0.2 4.2 6.6 0.25 5.6* 4.9 0.2 5.6 2000 IMPEDANCE () 1000 M-521C 100 M-542C M-532C M-522C M-520C, M-540C M-538C 10 1 10 100 500 FREQUENCY (MHz) TOKIN AMERICA 2.54 5.6 *M-538CT: 3.5 **M-538CT: 5.8 8 1.2 Lot No. 6.6 0.2 9.0 Lot No. 0.85 1.2 3 4.2+0.05 -0.05 M-542C 9.0 9.0 1.2 5.0 2 M-540C 155 Nicholson Lane * San Jose, CA 95134 Tel: 408.432.8020 Fax: 408.434.0375 www.tokin.com 0.25 EMI / EMC Components - Data Line Filters DC Line Filters - SBP Series Features Employs high-performance ferrites with excellent frequency characteristics Compact sized SMD type common mode choke coils designed for easy mounting on PC boards Applications Countermeasures against radiated noise in computers, word processors and microcomputers Countermeasures against output common mode noise in switching power supplies and AC adapters These SMD type filters are effective in counteracting noise in DC lines. Specifications Model Rated Current (A) Rated Voltage (DCV) Impedance () Typ. DC Resistance (m/line) Typ. 5 50 750 3.6 SBP-5001 Circuit Diagram Shapes and Dimensions 5.7 max. 9 max. 8 max. (mm) 2 1 3 4 Impedance Chacteristics (2.35) 2 3 IMPEDANCE () (4.5) (1.5) 1000 4 1 SBP-5001 100 10 1 1 10 100 1000 FREQUENCY (MHz) TOKIN AMERICA 155 Nicholson Lane * San Jose, CA 95134 Tel: 408.432.8020 Fax: 408.434.0375 www.tokin.com 9 EMI / EMC Components - Data Line Filters SBT SBT Coils Coils in tape format for automatic Applications * Available installation countermeasures at signal lines of * EMI common-mode noise supprespersonal computers, microcomputers, * Enable sion without influencing video signals peripheral devices, etc. circuit ensures excellent against common* L-element * Countermeasures attenuation characteristics over a wide mode noise at composite video signals Employing a high-performance ferrite toroidal core, Tokin SB coils provide ideal countermeasures against EMI. Features high-performance ferrites with * Employ superior frequency characteristics size, high-performance and * Compact low cost frequency range SBT-W Series Model Rated Current (mA) Inductance (1kHz, 70mA) (H) SBT-0115W SBT-0140W SBT-0160W SBT-0180W 500 500 500 500 5 4035% 6035% 8035% DC Resistance (m)max. Packaging 30 40 45 55 Loose Loose Loose Loose types types types types * Rated voltage: 50V * Insulation resistance: More than 10MV (100 V.DC, between lines) * Test voltage: 200V.DC for one minute between lines * Operating temperature: -25 , +708C Circuit Construction Dimensions 1000 500 IMPEDANCE () 7.5 max. 2.54 8.0 max. 1 1 5.08 4 6.4 max. [mm] 2 3 1 4-0.6 5.080.5 2.540.5 4.51 [mm] 100 SBT-0180W SBT-0160W SBT-0140W SBT-0115W 10 1 10 100 FREQUENCY (MHz) SBT-03W SBT-03W Series Series Model Rated Voltage DC (V) Rated Current (A) Inductance at 100kHz, 1mA (H) min. DC Resistance (m) max. Operating Temperature C 50 50 50 3.0 2.5 2.0 6.75 7.7 11.9 20 30 45 -25 +85 -25 +80 -25 +75 SBT-0308W SBT-0310W SBT-0315W 7.5 max. Circuit Construction IMPEDANCE (ohm) 1000 10.5 max. Dimensions 8.0 max. 7.5 3.51.0 5.0 [mm] 4-0.6 7.50.5 [mm] 5.00.5 SBT-0315W SBT-0310W 100 SBT-0308W 10 1 10 100 FREQUENCY (MHz) Model SBT-0208 SBT-0210 SBT-0240 SBT-0260 Rated Current (mA) Inductance (1kHz, 70mA) (H) DC Resistance (m) max. 500 500 500 500 8 50% 10 50% 40 35% 60 35% 20 20 34 50 7.5 max. Dimensions 6.351.3 12.7 7.5 max. 2.5 max. SBT-0260 Packaging Loose/tape Loose/tape Loose/tape Loose/tape types types types types 1000 IMPEDANCE () SBT SBT Series Series SBT-0240 100 SBT-0210 2.5 max. SBT-0208 10 1 10 8.7 max. 32.2 max. 18 1 max. 12.70.3 10 100 FREQUENCY (MHz) 11 max. 4.51 18+2.0 -0.0 50.5 TOKIN AMERICA [mm] 155 Nicholson Lane * San Jose, CA 95134 0.6 50.5 [mm] Tel: 408.432.8020 Fax: 408.434.0375 www.tokin.com EMI / EMC Components - Data Line Filters Data Line Filters Merely inserting EMI filters in the power line is sometimes not completely effective in reducing the susceptibility of electronic equipment to external noise. For example, high frequency signals may enter directly through the equipment case. In such cases, Tokin Data Line Filters, utilizing Tokin's own high-grade ferrite materials, can be applied directly to signal or data lines to help reduce noise susceptibility. Dimensions (mm) Model ESD-R Series B A C (With case) C 3 5.1 6.5 D A B (With snail-shaped case) ESD-SR Series TOKIN AMERICA A B C D Frequency Range Remarks ESD-R-10D 9.5 5.0 10.0 300 MHz ESD-R-10S 10.5 5.5 20.0 300 MHz ESD-R-12A 11.8 7.3 15.0 100 MHz ESD-R-12C 11.8 7.3 15.0 300 MHz ESD-R-12E 11.8 7.3 8.0 300 MHz ESD-R-12F 12.0 8.5 15.0 300 MHz ESD-R-12S 12.0 7.0 5.5 300 MHz ESD-R-14A 14.0 7.0 3.0 100 MHz ESD-R-14C 14.0 7.0 3.0 100 MHz ESD-R-14S 14.3 6.3 28.5 300 MHz ESD-R-15C 15.2 10.5 12.5 300 MHz ESD-R-16 15.9 11.6 8.4 ESD-R-16C 16.0 9.0 17.0 300 MHz ESD-R-17S 17.5 9.5 28.5 300 MHz ESD-R-19SD 18.5 10.0 10.0 300 MHz ESD-R-19E-1 19.0 10.7 5.3 300 MHz ESD-R-25SD 25.0 15.0 12.0 300 MHz ESD-R-25S 25.0 15.0 12.0 100 MHz ESD-R-25L-A 25.3 15.1 12.1 300 MHz ESD-R-26S 26.0 13.0 28.5 300 MHz ESD-R-28C 28.0 16.0 13.0 300 MHz ESD-R-31C 31.0 19.0 8.0 300 MHz ESD-R-12D 12.9 6.0 6.4 300 MHz ESD-R-19 19.0 9.0 11.0 100 MHz ESD-R-19D 19.0 9.0 11.0 300 MHz ESD-R-25 26.0 14.0 15.0 ESD-R-25D 26.0 14.0 15.0 ESD-R-38 39.0 17.5 14.0 100 MHz ESD-R-47 48.0 25.5 16.0 100 MHz ESD-R-57 61.0 32.4 24.0 ESD-R-19B 21.5 8.8 12.5 18.5 100 MHz ESD-R-19DB 21.5 8.8 21.5 18.5 300 MHz Black ESD-R-25B 29.3 13.9 15.0 23.0 100 MHz White ESD-R-25D-B 29.3 13.9 15.0 23.0 300 MHz Black ESD-R-38B 42.4 17.9 16.0 28.0 100 MHz White ESD-R-47B 51.5 25.5 17.5 34.0 100 MHz White ESD-SR-12 19.0 max. 30.0 max. ESD-SR-12-S 12.0 25.3 ESD-SR-15 22.5 max. 33.5 max. ESD-SR-15-S 15.0 28.3 300 MHz ESD-SR-25 33.0 max. 33.5 max. 300 MHz ESD-SR-25-S 25.0 23.0 300 MHz 155 Nicholson Lane * San Jose, CA 95134 -- Coated core 100 MHz Coated core Coated core 100 MHz -- 300 MHz 100 MHz Color of case: White 300 MHz 300 MHz -- -- Tel: 408.432.8020 Fax: 408.434.0375 W/O case 300 MHz W/O case W/O case www.tokin.com 11 EMI / EMC Components - Data Line Filters Data Filters (cont.) DataLine Line Filters (cont.) ESD-FPL Series Model ESD-FPL-7 ESD-FPL-13 ESD-FPL-15 ESD-FPL-16 ESD-FPL-20-12 ESD-FPL-20-15 ESD-FPL-26 ESD-FPL-34 ESD-FPL-50 ESD-FPD-16 ESD-FPD-16-1 ESD-FPD-34 ESD-FPD-34-1 ESD-FPD-40 ESD-FPD-40-1 ESD-FPD-50 ESD-FPD-50-1 ESD-FPL Series a d e c b ESD-FPD Series (core) a d ;; ; e c b a 28.0 23.8 28.0 37.0 33.2 33.2 41.2 60.0 80.0 37.0 37.0 60.0 60.0 68.0 68.0 80.0 80.0 Dimensions (mm) b c d e Applications 23.5 18.8 23.5 25.4 27.0 27.0 35.0 48.5 68.6 25.4 25.4 48.3 48.3 56.0 56.0 68.6 68.6 1.5 1.1 1.5 1.9 1.5 1.5 1.5 2.2 1.9 2.6 2.6 2.0 2.0 2.0 2.0 2.0 2.0 16 13 16 16 20 20 26 34 50 16 16 34 34 40 40 50 50 7.7 6.3 7.7 12.0 8.0 8.0 7.7 12.0 12.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 6.8 15.0 14.6 12.7 12.0 15.0 15.0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 Core Core Core Core Core Core Core Core Core Core Core Core Core Core Core Core Core Remarks ESD-FPL-34-R: Coated Hinged Hinged Hinged Hinged Hinged Hinged Hinged type, type, type, type, type, type, type, stainless clamp nylon clamp stainless clamp nylon clamp stainless clamp nylon clamp stainless clamp [mm] Bead Inductors Model B-01-AT B-01-AT1F B-01-A B-01-RT B-01-RTF B-02-R B-06-R-25 B-06-R-50 B-06-RTF-50 DIP Noise Filters Packaging Type Axial lead tape Radial lead tape 5000 reel 2000 flat loose type 2000 reel 2000 flat loose type loose type loose type 2000 reel Remarks Model Dimensions D-40C D-42C D-45C D-47C D-55C D-58C D-22C D-03C D-03C1 D-07C1 D-08C2 D-08C2A D-05N1 D-16C D-20C 8.72 10 9 13.8 10 9 21.42 10 9 26.5 10 9 13.8 10 9 21.42 10 9 12 23 23 25.5 12.5 7.5 25.5 12.5 7.5 25.5 22.5 10 12 21 20 16 21 14 23 12.5 9 12.5 16 8.5 13 25.5 11 6P/3 10P/5 16P/8 20P/10 16P/5 16P/8 6P/3 16P/8 16P/8 16P/8 8P/4 8P/4 16P/8 8P/4 16P/8 Common mode Commonmode Common mode Common mode Common mode Common mode Common mode Common mode Common mode Common mode Common mode Common mode Normal mode Common mode Common mode SN Coils - SNT Series Model 12 TOKIN AMERICA Rated Current (A) Inductance Min. (H) DC Resistance Max. (m) Dimensions Max. (mm) Packaging SNT-S10 3.0 1.5 25 2.5 9.5 5.0 Loose type/reel type SNT-S20 1.5 6 35 12.5 9.5 5.0 Loose type/reel type SNT-S30 0.5 13 SNT-D10 3.0 SNT-D20 1.5 SNT-D30 0.5 155 Nicholson Lane * San Jose, CA 95134 95 12.5 9.5 5.0 Loose type/reel type 25 12.5 9.5 6.0 Loose type/reel type 10 45 12.5 9.5 6.0 Loose type/reel type 20 98 12.5 9.5 6.0 Loose type/reel type 2.5 Tel: 408.432.8020 Fax: 408.434.0375 www.tokin.com EMI / EMC Components - Power Line Filters Data Line Filters (cont.) EMC Beads Model Dimensions (mm) Remarks 4.8 5.5 6.8 9.0 6.4 10.5 6.4 11.0 4.8 6.0 - 7.0 7.5 - B-1 B-3 B-4 B-5 B-7 B-8 B-9 B-10 Inductive bead Resistive bead Inductive bead Resistive bead Power Line Filters DC Line Filters SH type DC Line Filters are best suited for DC line noise countermeasures. Model Rated Voltage DC (V) Rated current (A) Inductance (H) min. SH-201/211 50 3 0.5 SH-202/212 50 3 1.5 SH-201/311 50 3 3.2 SH-201/312 50 3 7.5 Dimensions (W x D x H) (mm) Diameter of pin terminal (mm) 12.5 x 10 x 12 / 14 x 12 x 9.5 0.7 EMI / EMC Filters for Telephone Sets against electromagnetic wave interference. We need to find new ways to deal with the negative influences of electromagnetic waves. Following extensive research into magnetic materials and noise suppressors, Tokin has developed and standardized a noise filter that features high frequency characteristics for residential telephones. This noise filter is useful as a noise suppressor for telephone signal lines and prevents FM/AM radio and TV broadcasts from interfering with telephone service. It also prevents unwanted radiation noise. Model Frequency Range (MHz) Impedance (k or attenuation Rated Current (mA) LFT SZ-03 ST-101 ST-101A ST-110AV ST-110AH HFT ST-201 ST-201A ST-202 ST-202A ST-101F2 ST-110BH ST-110BV ST-202S 0.5 7 0.5 7 0.5 7 0.5 7 0.5 7 0.5 7 7 40 7 40 7 40 7 100 7 100 0.5 7 0.5 7 0.5 7 7 100 27 (15dB) (at 0.5 MHz) 27 (at 0.5 MHz) 3 (at 0.5 MHz) 3 (at 0.5 MHz) 27 (at 0.5 MHz) 27 (at 0.5 MHz) 2.6 (15dB) (at 7 MHz) 1.5 (at 7 MHz) 1.5 (at 7 MHz) 0.6 (at 100 MHz) 0.6 (at 100 MHz) 40 (at 600 MHz) 150 (at Resonance) 150 (at Resonance) 0.6 (at 100 MHz) 100 100 200 200 300 300 100 200 200 1000 1000 200 150 150 1000 DC Resistance () With increasing broadcast output and with new broadcasting equipment going into use, electromagnetic wave interference in telephones has recently become a serious problem. In addition, the rapid proliferation of electronic and digital telephones causes a corresponding decrease in the immunity 10 10 0.25 0.25 3 3 0.2 0.15 0.15 0.05 0.05 2.7 7.5 7.5 0.035 Application Low Freq. Low Freq. Low Freq. Low Freq. Low Freq. Low Freq. High Freq. High Freq. High Freq. High Freq. High Freq. Low Freq. Low Freq. Low Freq. High Freq. Note: Rated voltage: 50V DC. Test voltage: 500V DC, one minute. Insulation resistance: min. 10 M (250V DC). Temperature range: -20C to +75C. For high frequency 8 terminals, DIP series are available. For applications over 40 MHz, consult our Technical Department. TOKIN AMERICA 155 Nicholson Lane * San Jose, CA 95134 Tel: 408.432.8020 Fax: 408.434.0375 www.tokin.com 13