• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Inductors for High-frequency Circuits
Multilayer/High-Q
MLG series
Type:
Issue date:
MLG0603P 0603[0201 inch]*
* Dimensions Code JIS[EIA]
August 2012
• All specifications are subject to change without notice.
(1/5)
001-08 / 20120822 / e521_mlg_03
Inductors for High-frequency Circuits
Multilayer/High-Q
MLG Series MLG0603P
FEATURES
• It serializes a product of inductance 0.6 to120nH.
• By the most suitable design, Q is higher than competing in a
conventional product MLG0603S type. In particular, Q in more
than 800MHz largely improved.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions LW
(3 Type name
(4) Inductance
(5) Tolerance
(6) Packaging style
(7) TDK internal code
SPECIFICATIONS
PACKAGING STYLE AND QUANTITIES
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Conformity to RoHS Directive
0.6±0.03
0.09±0.04
0.15±0.05
0.3±0.03
0.3±0.03
Weight: 0.2mg
Dimensions in mm
Dimensions in mm
0.3 0.250.25
0.3
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
MLG 0603 P 2N2 S T
(1) (2) (3) (4) (5) (6) (7)
0603 0.60.3mm (LW)
2N2 2.2nH
12N 12nH
B ±0.1nH
C ±0.2nH
S ±0.3nH
H±3%
J±5%
T Taping (reel)
Operating temperature range –55 to +125°C
Storage temperature range –55 to +125°C(After mount)
Packaging style Quantity
Taping 15000 pieces/reel
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(2/5)
001-08 / 20120822 / e521_mlg_03
ELECTRICAL CHARACTERISTICS
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency
(GHz)
DC resistance
()Rated current
(mA)max. Part No.
min. typ. max. typ.
0.6 ±0.1, ±0.2nH — 500 10.0 20.0 0.06 0.01 1000 MLG0603P0N6T
0.7 ±0.1, ±0.2nH — 500 10.0 20.0 0.06 0.01 1000 MLG0603P0N7T
0.8 ±0.1, ±0.2nH — 500 10.0 20.0 0.06 0.02 1000 MLG0603P0N8T
0.9 ±0.1, ±0.2nH — 500 10.0 20.0 0.06 0.02 1000 MLG0603P0N9T
1.0 ±0.1, ±0.2, 0.3nH 14 500 10.0 20.0 0.07 0.02 1000 MLG0603P1N0T
1.1 ±0.1, ±0.2, 0.3nH 14 500 10.0 19.9 0.07 0.03 1000 MLG0603P1N1T
1.2 ±0.1, ±0.2, 0.3nH 14 500 10.0 16.0 0.08 0.04 800 MLG0603P1N2T
1.3 ±0.1, ±0.2, 0.3nH 14 500 10.0 13.9 0.08 0.03 800 MLG0603P1N3T
1.4 ±0.1, ±0.2, 0.3nH 14 500 10.0 11.7 0.09 0.04 800 MLG0603P1N4T
1.5 ±0.1, ±0.2, 0.3nH 14 500 10.0 14.9 0.10 0.03 800 MLG0603P1N5T
1.6 ±0.1, ±0.2, 0.3nH 14 500 10.0 13.4 0.10 0.03 700 MLG0603P1N6T
1.7 ±0.1, ±0.2, 0.3nH 14 500 10.0 12.8 0.10 0.02 700 MLG0603P1N7T
1.8 ±0.1, ±0.2, 0.3nH 14 500 9.0 10.7 0.10 0.03 700 MLG0603P1N8T
1.9 ±0.1, ±0.2, 0.3nH 14 500 9.0 10.9 0.10 0.04 600 MLG0603P1N9T
2.0 ±0.1, ±0.2, 0.3nH 14 500 8.5 10.1 0.10 0.03 600 MLG0603P2N0T
2.1 ±0.1, ±0.2, 0.3nH 14 500 8.0 9.8 0.10 0.05 600 MLG0603P2N1T
2.2 ±0.1, ±0.2, 0.3nH 14 500 7.5 9.0 0.10 0.07 600 MLG0603P2N2T
2.3 ±0.1, ±0.2, 0.3nH 14 500 7.5 8.4 0.20 0.07 600 MLG0603P2N3T
2.4 ±0.1, ±0.2, 0.3nH 14 500 7.5 10.9 0.20 0.12 500 MLG0603P2N4T
2.5 ±0.1, ±0.2, 0.3nH 14 500 7.5 9.9 0.20 0.09 500 MLG0603P2N5T
2.6 ±0.1, ±0.2, 0.3nH 14 500 7.5 10.1 0.20 0.14 500 MLG0603P2N6T
2.7 ±0.1, ±0.2, 0.3nH 14 500 7.5 10.0 0.20 0.14 500 MLG0603P2N7T
2.8 ±0.1, ±0.2, 0.3nH 14 500 7.5 9.9 0.20 0.10 500 MLG0603P2N8T
2.9 ±0.1, ±0.2, 0.3nH 14 500 7.5 9.2 0.20 0.10 500 MLG0603P2N9T
3.0 ±0.1, ±0.2, 0.3nH 14 500 7.5 9.1 0.20 0.14 450 MLG0603P3N0T
3.1 ±0.1, ±0.2, 0.3nH 14 500 7.5 8.8 0.20 0.10 450 MLG0603P3N1T
3.2 ±0.1, ±0.2, 0.3nH 14 500 7.5 8.4 0.20 0.14 450 MLG0603P3N2T
3.3 ±0.1, ±0.2, 0.3nH 14 500 7.5 8.4 0.20 0.13 450 MLG0603P3N3T
3.4 ±0.1, ±0.2, 0.3nH 14 500 7.0 8.1 0.20 0.13 450 MLG0603P3N4T
3.5 ±0.1, ±0.2, 0.3nH 14 500 6.5 8.0 0.20 0.12 450 MLG0603P3N5T
3.6 ±0.1, ±0.2, 0.3nH 14 500 6.5 7.7 0.20 0.10 400 MLG0603P3N6T
3.7 ±0.1, ±0.2, 0.3nH 14 500 6.5 7.4 0.20 0.14 400 MLG0603P3N7T
3.8 ±0.1, ±0.2, 0.3nH 14 500 5.8 7.0 0.30 0.24 400 MLG0603P3N8T
3.9 ±0.1, ±0.2, 0.3nH 14 500 5.8 7.1 0.30 0.22 400 MLG0603P3N9T
4.0 ±0.1, ±0.2, 0.3nH 14 500 5.8 6.7 0.40 0.21 350 MLG0603P4N0T
4.1 ±0.1, ±0.2, 0.3nH 14 500 5.8 6.7 0.40 0.29 350 MLG0603P4N1T
4.2 ±0.1, ±0.2, 0.3nH 14 500 5.8 6.6 0.40 0.24 350 MLG0603P4N2T
4.3 ±3%, ±5%, ±0.3nH 14 500 5.8 6.7 0.40 0.24 350 MLG0603P4N3T
4.7 ±3%, ±5%, ±0.3nH 14 500 5.5 6.9 0.40 0.16 350 MLG0603P4N7T
5.1 ±3%, ±5%, ±0.3nH 14 500 5.5 6.6 0.40 0.30 350 MLG0603P5N1T
5.6 ±3%, ±5%, ±0.3nH 14 500 4.0 5.3 0.40 0.32 350 MLG0603P5N6T
6.2 ±3%, ±5%, ±0.3nH 14 500 4.0 6.3 0.70 0.59 300 MLG0603P6N2T
6.8 ±3%, ±5% 14 500 4.0 6.1 0.75 0.62 300 MLG0603P6N8T
7.5 ±3%, ±5% 14 500 4.0 5.4 0.80 0.70 300 MLG0603P7N5T
8.2 ±3%, ±5% 14 500 4.0 5.2 0.85 0.71 250 MLG0603P8N2T
9.1 ±3%, ±5% 14 500 4.0 5.0 0.90 0.76 250 MLG0603P9N1T
10 ±3%, ±5% 14 500 4.0 4.7 0.95 0.85 250 MLG0603P10NT
11 ±3%, ±5% 14 500 3.5 4.5 1.00 0.64 250 MLG0603P11NT
12 ±3%, ±5% 14 500 3.5 4.3 1.10 0.82 250 MLG0603P12NT
13 ±3%, ±5% 14 500 3.2 4.2 1.10 0.87 250 MLG0603P13NT
15 ±3%, ±5% 14 500 3.2 3.7 1.20 0.94 250 MLG0603P15NT
16 ±3%, ±5% 14 500 3.0 3.6 1.20 1.00 200 MLG0603P16NT
18 ±3%, ±5% 14 500 3.0 3.5 1.40 1.04 200 MLG0603P18NT
20 ±3%, ±5% 14 500 2.2 3.3 1.90 1.33 150 MLG0603P20NT
22 ±3%, ±5% 14 500 2.2 2.9 1.90 1.31 150 MLG0603P22NT
24 ±3%, ±5% 14 500 2.2 2.9 2.10 1.17 140 MLG0603P24NT
27 ±3%, ±5% 14 500 2.2 2.7 2.10 1.45 140 MLG0603P27NT
• All specifications are subject to change without notice.
(3/5)
001-08 / 20120822 / e521_mlg_03
ELECTRICAL CHARACTERISTICS
: Please specify inductance tolerance, B (±0.1nH), C (±0.2nH), S (±0.3nH), H (±3%) or J (±5%).
Please contact us for information on inductance tolerance, G(±2%).
• Test equipment
Inductance Q : HP4291A+16197A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
• Short bar residual inductance =0.43nH
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency
(GHz)
DC resistance
()Rated current
(mA)max. Part No.
min. typ. max. typ.
30 ±3%, ±5% 10 300 1.8 2.3 2.20 1.37 130 MLG0603P30NT
33 ±3%, ±5% 10 300 1.8 2.4 2.20 1.55 130 MLG0603P33NT
36 ±3%, ±5% 10 300 1.8 2.2 2.40 1.49 120 MLG0603P36NT
39 ±3%, ±5% 10 300 1.8 2.2 2.40 1.72 120 MLG0603P39NT
43 ±3%, ±5% 10 300 1.6 2.0 2.90 1.61 110 MLG0603P43NT
47 ±3%, ±5% 10 300 1.6 2.0 2.90 2.18 110 MLG0603P47NT
51 ±3%, ±5% 10 300 1.4 1.9 3.50 1.87 100 MLG0603P51NT
56 ±3%, ±5% 10 300 1.4 1.8 3.50 2.35 100 MLG0603P56NT
62 ±3%, ±5% 10 300 1.2 1.6 3.50 2.12 100 MLG0603P62NT
68 ±3%, ±5% 9 300 1.2 1.6 3.50 2.69 100 MLG0603P68NT
75 ±3%, ±5% 9 300 1.0 1.5 4.00 2.59 80 MLG0603P75NT
82 ±3%, ±5% 9 300 1.0 1.5 4.00 2.71 80 MLG0603P82NT
91 ±3%, ±5% 9 300 0.9 1.3 4.50 2.92 80 MLG0603P91NT
100 ±3%, ±5% 9 300 0.9 1.3 4.50 3.20 80 MLG0603PR10T
110 ±3%, ±5% 9 300 0.8 1.1 5.00 3.50 80 MLG0603PR11T
120 ±3%, ±5% 9 300 0.8 1.0 5.00 3.79 80 MLG0603PR12T
• All specifications are subject to change without notice.
(4/5)
001-08 / 20120822 / e521_mlg_03
L, Q vs. FREQUENCY CHARACTERISTICS
Part No. Inductance(nH)typ. Q typ.
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
MLG0603P0N6 0.6 0.6 0.6 0.6 0.6 16min. 22min. 35min. 37min. 41min.
MLG0603P0N7 0.7 0.7 0.7 0.7 0.7 16min. 22min. 35min. 37min. 41min.
MLG0603P0N8 0.8 0.8 0.8 0.8 0.4 16 22 35 37 41
MLG0603P0N9 0.9 0.9 0.9 0.9 0.9 17 22 35 37 41
MLG0603P1N0 1.0 1.0 1.0 1.0 1.0 16 21 33 36 40
MLG0603P1N1 1.1 1.1 1.1 1.1 1.1 17 23 36 38 43
MLG0603P1N2 1.2 1.2 1.2 1.2 1.2 18 24 38 40 45
MLG0603P1N3 1.3 1.3 1.3 1.3 1.3 17 22 34 36 40
MLG0603P1N4 1.4 1.4 1.4 1.4 1.4 18 23 36 39 43
MLG0603P1N5 1.5 1.5 1.5 1.5 1.5 17 22 33 35 39
MLG0603P1N6 1.6 1.6 1.6 1.6 1.6 17 22 33 35 38
MLG0603P1N7 1.7 1.7 1.7 1.7 1.7 17 22 33 35 39
MLG0603P1N8 1.8 1.8 1.8 1.8 1.8 17 22 34 35 39
MLG0603P1N9 1.9 1.9 1.9 1.9 1.9 18 24 36 38 42
MLG0603P2N0 2.0 2.0 2.0 2.0 2.0 19 23 35 37 41
MLG0603P2N1 2.1 2.1 2.1 2.1 2.1 18 23 34 36 39
MLG0603P2N2 2.2 2.2 2.2 2.2 2.3 18 23 35 36 40
MLG0603P2N3 2.3 2.3 2.3 2.4 2.4 18 22 33 35 38
MLG0603P2N4 2.4 2.4 2.4 2.4 2.4 16 21 31 33 36
MLG0603P2N5 2.5 2.5 2.5 2.5 2.5 17 22 33 34 38
MLG0603P2N6 2.6 2.6 2.6 2.6 2.6 17 22 33 35 38
MLG0603P2N7 2.7 2.7 2.7 2.7 2.7 17 21 33 35 38
MLG0603P2N8 2.8 2.8 2.8 2.8 2.9 17 22 34 36 40
MLG0603P2N9 2.9 2.9 2.9 2.9 3.0 17 22 34 35 39
MLG0603P3N0 3.0 3.0 3.0 3.1 3.1 17 21 32 34 37
MLG0603P3N1 3.1 3.1 3.1 3.2 3.2 17 22 33 34 37
MLG0603P3N2 3.2 3.2 3.2 3.3 3.3 17 22 34 35 38
MLG0603P3N3 3.3 3.3 3.4 3.4 3.4 18 22 33 35 38
MLG0603P3N4 3.4 3.4 3.5 3.5 3.6 18 23 34 35 38
MLG0603P3N5 3.5 3.5 3.6 3.6 3.7 18 23 34 35 38
MLG0603P3N6 3.6 3.6 3.7 3.7 3.8 18 22 33 34 37
MLG0603P3N7 3.7 3.7 3.8 3.9 4.0 18 23 34 35 37
MLG0603P3N8 3.8 3.8 3.9 4.0 4.1 17 22 32 33 36
MLG0603P3N9 3.9 3.9 4.0 4.1 4.2 17 22 32 34 36
MLG0603P4N0 4.0 4.0 4.1 4.2 4.4  
18 22 32 33 36
MLG0603P4N1 4.1 4.1 4.3 4.3 4.5  
18 22 33 34 36
MLG0603P4N2 4.2 4.2 4.4 4.5 4.6  
18 22 32 33 35
MLG0603P4N3 4.3 4.3 4.5 4.5 4.7 17 21 32 33 35
MLG0603P4N7 4.7 4.7 4.9 5.0 5.1 16 21 31 32 34
MLG0603P5N1 5.1 5.1 5.3 5.4 5.7 16 21 31 32 34
MLG0603P5N6 5.6 5.6 6.1 6.2 6.6 18 22 31 32 32
MLG0603P6N2 6.2 6.2 6.5 6.7 7.0 16 21 30 31 33
MLG0603P6N8 6.8 6.8 7.3 7.5 8.0 16 21 29 30 31
MLG0603P7N5 7.5 7.5 8.1 8.3 8.8 16 21 30 30 32
MLG0603P8N2 8.2 8.2 9.0 9.3 10.0 17 21 30 30 31
MLG0603P9N1 9.1 9.1 10.0 10.3 11.1 17 21 30 31 32
MLG0603P10N 1010111213 1621282828
MLG0603P11N 1111131315 
18 23 30 30 30
MLG0603P12N 1212141517 1822282827
MLG0603P13N 1313151619 
18 22 28 28 26
MLG0603P15N 1515182024 1822272624
MLG0603P16N 1616202227 
18 22 26 25 22
MLG0603P18N 1818232633 1822252420
MLG0603P20N 2021273142 
18 22 23 22 17
MLG0603P22N 2223344068 1821211811
MLG0603P24N 2425364372 
19 22 21 18 11
MLG0603P27N 27284557 18211815
MLG0603P30N 30 32 59  
18 21 15
MLG0603P33N 333668 151711
MLG0603P36N 37 39   
16 17
MLG0603P39N 40 43 15 17
MLG0603P43N 44 48   
15 16  
MLG0603P47N 48 53 15 16
MLG0603P51N 53 59    
15 16   
MLG0603P56N 58 66 15 15
MLG0603P62N 65 76     
15 15   
MLG0603P68N 71 82 15 15
MLG0603P75N 79 97     
14 13    
MLG0603P82N 87 109 14 13
MLG0603P91N 99 132     
13 12    
MLG0603PR10 110 152 14 12
MLG0603PR11 126 211     
13 9    
MLG0603PR12 151 12
• All specifications are subject to change without notice.
(5/5)
001-08 / 20120822 / e521_mlg_03
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
1
0
10
1000
100
1 10 100 1000 10000
Inductance(nH)
Frequency(MHz)
12nH
100nH
1.2nH
1 10 100 1000 10000
Q
Frequency(MHz)
0
5
10
15
20
25
30
35
40
45
50
12nH
100nH
1.2nH
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm