1. Product profile
1.1 General description
Fast soft-recovery rectifier diodes in a cavity free cylindrical glass surface mounted
package using Implotec™ technology.
1.2 Features
1.3 Applications
1.4 Quick reference data
2. Pinning information
PRS07 series
Fast soft-recovery rectifiers
Rev. 02 — 26 July 2004 Product data sheet
■Low leakage current ■Glass passivated
■Hermetically sealed package ■Small package.
■Switched-mode power supplies ■Snubber diode.
■VR≤600 V (PRS07J) ■VF≤1.2 V
■VR≤400 V (PRS07G) ■IF(AV) ≤1.7 A
■VR≤200 V (PRS07D) ■trr ≤250 ns.
Table 1: Discrete pinning
Pin Description Simplified outline Symbol
a anode (a)
SOD87
k cathode (k) k
SOD87
a
a
001aaa020
k
9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 02 — 26 July 2004 2 of 9
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
3. Ordering information
4. Limiting values
Table 2: Ordering information
Type number Package
Name Description Version
PRS07D SOD87 Hermetically sealed glass surface mounted package; Implotec™
technology; 2 connectors SOD87
PRS07G
PRS07J
Table 3: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VRRM repetitive peak reverse voltage
PRS07D - 200 V
PRS07G - 400 V
PRS07J - 600 V
VRWM crest working reverse voltage
PRS07D - 200 V
PRS07G - 400 V
PRS07J - 600 V
VRreverse voltage
PRS07D - 200 V
PRS07G - 400 V
PRS07J - 600 V
IF(AV) average forward current Ttp =65°C; Figure 1;
averaged over any 20 ms period - 1.7 A
Tamb =45°C; Figure 2;
mounted on a printed-circuit board; Figure 6;
averaged over any 20 ms period
- 0.6 A
IFRM repetitive peak forward current Ttp = 105 °C - 13 A
Tamb =60°C - 5.5 A
IFSM non-repetitive peak forward current tp= 8.3 ms half sine wave;
Tj= 150 °C prior to surge; VR=V
RRM(max)
-20A
Tstg storage temperature −65 +150 °C
Tjjunction temperature −65 +150 °C
9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 02 — 26 July 2004 3 of 9
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
5. Thermal characteristics
a = 1.42; VR=V
RRM(max);δ= 0.5. a = 1.42; VR=V
RRM(max);δ= 0.5.
Device mounted as shown in Figure 6.
Fig 1. Average forward current as a function of
tie-point temperature (including losses due to
reverse leakage); maximum values.
Fig 2. Average forward current as a function of
ambient temperature (including losses due to
reverse leakage); maximum values.
003aaa637
0
1
2
3
0 40 80 120 160
I
F(AV)
(A)
T
tp
(°C)
003aaa638
0
0.2
0.4
0.6
0.8
040 80 120 160
I
F(AV)
(A)
T
amb
(°C)
Table 4: Thermal characteristics
Symbol Parameter Conditions Min Typ Max Unit
Rth(j-tp) thermal resistance from junction to tie-point - 30 - K/W
Rth(j-a) thermal resistance from junction to ambient mounted on a printed-circuit
board, 1.5 mm thick; copper
thickness ≥ 40 µm; Figure 6
- 150 - K/W
9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 02 — 26 July 2004 4 of 9
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
6. Characteristics
Table 5: Characteristics
T
j
=25
°
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Static characteristics
VFforward voltage IF= 0.7 A; Figure 3
Tj=25°C - - 1.2 V
Tj= 150 °C - - 1.05 V
IRreverse current VR=V
RRM;Figure 4
Tj=25°C --10µA
Tj= 125 °C --50µA
Dynamic characteristics
Cddiode capacitance f = 1 MHz; VR=4V -9-pF
trr reverse recovery time switching from IF= 0.5 A to IR=1A;
measured at IR= 0.25 A; Figure 7 - - 250 ns
Tj=25°C. Tj=25°C.
Fig 3. Forward current as a function of forward
voltage; maximum values. Fig 4. Reverse current as a function of junction
temperature; maximum values.
003aaa639
0
2
4
6
8
10
0123
I
F
(A)
V
F
(V)
T
j
= 150 °C
25 °C
103
102
10
10
003aaa622
120
40 80 160
Tj (°C)
IR
(µA)
9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 02 — 26 July 2004 5 of 9
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
f = 1 MHz; Tj=25°C.
Fig 5. Diode capacitance as a function of reverse
voltage; typical values. Fig 6. Printed-circuit board for surface mounting.
1
003aaa623
10 102103
1
102
10
VR (V)
Cd
(pF)
msb213
4.5
2.5
1.25
50
50
Dimensions in mm
Tj=25°C.
Fig 7. Test circuit and reverse recovery time waveform definition.
10 Ω
1 Ω
50 Ω
25 V
DUT
mam057
+trr
0.5
0
0.5
1.0
IF
(A)
IR
(A)
t
0.25
9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 02 — 26 July 2004 6 of 9
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
7. Package outline
Fig 8. SOD87 package outline.
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOD87 100H03 99-06-04
04-06-28
Hermetically sealed glass surface mounted package;
ImplotecTM(1) technology; 2 connectors SOD87
UNIT D
mm 2.1
2.0 2.0
1.8 3.7
3.3 0.3
D1 HL
DIMENSIONS (mm are the original dimensions) H
DD1
LL
(2)
0 1 2 mm
scale
Notes
1. Implotec is a trademark of Koninklijke Philips Electronics N.V.
2. The marking indicates the cathode.
ka
9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 02 — 26 July 2004 7 of 9
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
8. Revision history
Table 6: Revision history
Document ID Release
date Data sheet
status Change
notice Document
number Supersedes
PRS07_SERIES_2 20040726 Product
data sheet - 9397 750 13204 PRS07_SERIES_1
Modifications: •IF(AV) data and conditions revised in Section 1.4 “Quick reference data” and Table 3
“Limiting values”
•Figure 1,2and 3 updated
•Tstg and Tj data revised in Table 3 “Limiting values”
•VF data and conditions revised in Table 5 “Characteristics”
PRS07_SERIES_1 20040203 Product
data sheet - 9397 750 12712 -
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet Rev. 02 — 26 July 2004 8 of 9
9. Data sheet status
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
10. Definitions
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
11. Disclaimers
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
12. Trademarks
Implotec — is a trademark of Koninklijke Philips Electronics N.V.
13. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
Level Data sheet status[1] Product status[2] [3] Definition
I Objective data Development This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
© Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights. Date of release: 26 July 2004
Document order number: 9397 750 13204
Published in The Netherlands
Philips Semiconductors PRS07 series
Fast soft-recovery rectifiers
14. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3
6 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
8 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 7
9 Data sheet status. . . . . . . . . . . . . . . . . . . . . . . . 8
10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
12 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
13 Contact information . . . . . . . . . . . . . . . . . . . . . 8
