U.FL-2LP(V)-04N1-A-(240) - Hirose Connector

U.FL Series

2014.10e

1.9

(MAX 2.0)

2.3

(MAX 2.4)

2.4

(MAX 2.5)

(MAX 3.2)

U.FL-LP(V)-040

U.FL-LP(V)-040HF

U.FL-LP-062

U.FL-LP-062HF

U.FL-LP-088

U.FL-LP-088HF

U.FL-LP-040

U.FL-LP-040HF

U.FL-LP-066

U.FL-LP-066HF

U.FL-LP-068HF

E.FL-LP-040

E.FL-LP-066

U.FL E.FL

Plug

2.4 (2.5 Max)2.4 (2.5 Max)1.9 (2 Max)2.3 (2.4 Max)2.3 (2.4 Max)

Dia 0.81

Dia 1.0

Dia 1.37

Dia 1.32

Dia 1.13

U.FL-LP-040

U.FL-LP-040HF

U.FL-LP-066

U.FL-LP-066HF

U.FL-LP-068HF

U.FL-R-SMT-1

U.FL-LP(V)-040

U.FL-LP(V)-040HF

U.FL-LP-062

U.FL-LP-062HF

U.FL-LP-088

U.FL-LP-088HF

■Features

Nominal mated height of 1.9 or 2.3mm, 2.4mm

(Max. 2.0 or 2.4mm, 2.5mm)

(Fig.1)

2. Small mounting area

The receptacle occupies an area of 7.7mm2.

3. Light weight

Receptacle: 15.7mg

4. Supports high frequency up to 6GHz

To meet the frequency requirements of a wide

variety of miniature devices, the connectors offer

high frequency performance from DC to 6GHz, with

a V.S.W.R. of 1.3 to 1.5 max.

5. Automatic board placement

Packaged on tape-and-reel the receptacles can be

placed with vacuum nozzles of the automatic

placement equipment.

Plugs are terminated with ultra-fine

coaxial (fluorinated resin insulated) cable

Standard ultra-fine coaxial cable of 0.81mm diameter

(single braid shielding) is used for the plug

termination, assuring secure and stable connections.

7. Simple connector mating / unmating

Use of available extraction tool assures correct

disconnection of the plug and receptacle.

8. Verification of the fully mated condition

Tactile click sensation confirms fully mated

condition, assuring complete electrical and

mechanical connection.

Halogen-free*(Receptacle,plug(HF type))

*As defined by IEC61249-2-21

Br-900 ppm maximum, Cl-900 ppm maximum,Cl+Br

combined-1,500 ppm maximum

■Applications

Mobile phones, wireless communication devices,

electronic measuring instruments, GPS, wireless

LAN, Bluetooth and any application requiring high

frequency transmission using small coaxial

connectors.

Mated height comparison (with E.FL series)

●Space Factor of Mated Connector

Up to 6GHz

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm,

2.4mm Mated Height

Fig.1

Fig.2

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Note 1: Cable type connectors were measured with SMA conversion

adapters attached to both ends of the harness product of a

suitable 100cm cable.

Note 2: Board type connectors were mounted to a 50ø glass epoxy

board and measurements were conducted with SMA

conversion adapters attached.

■Product Specifications

Ratings

Nominal characteristic impedance

Frequency range

50 ohms

DC to 6GHz

Operating temperature range

Operating humidity

-40˚C to +90˚C

90%RH max.

Storage temperature range

Storage humidity

-30˚C to +70˚C

90%RH max.

Item Specification Conditions

1. Contact resistance Center : 20 m ohms max.

Outer : 10 m ohms max.

10 mA max.

2. Insulation resistance 500 M ohms min. 100 V DC

3. Withstanding voltage No flashover or insulation breakdown. 200 V AC / 1 minute

4. V.S.W.R.*

Part No. Up to 3GHz 3 to 6GHz

U.FL-LP-040* dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.35 Max

U.FL-LP(V)-040* dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.3 Max

U.FL-LP-068* dia.1.13mm Coaxial Cable Assembly 1.3 Max 1.4 Max

U.FL-LP-066* dia.1.32mm Coaxial Cable Assembly 1.3 Max 1.5 Max

U.FL-LP-062* dia.1mm Coaxial Cable Assembly 1.3 Max 1.3 Max

U.FL-LP-088* dia.1.37mm Coaxial Cable Assembly 1.3 Max 1.4 Max

5. Durability

(mating / un-mating,

with corresponding

plug)

Contact resistance

Center : 25 m ohms max.

Outer : 15 m ohms max.

30 cycles

6. Vibration No electrical discontinuity of 1µs min.

No damage, cracks or parts dislocation.

Frequency: 10 to 100 Hz, single amplitude of 1.5mm,

acceleration of 59m/s

, for 5 cycles in the direction of each

of the 3 axis.

7. Shock Acceleration of 735 m/s2, 11ms duration, sine half-

wave waveform, 3 cycles in each of 3 axes.

8. Humidity

(Steady state)

No damage, cracks or parts dislocation.

Insulation resistance 10 M ohms min.(humidity high)

Insulation resistance 500 M ohms min.(dry)

96 hours at temperature of 40ç and humidity of 95%.

9. Temperature cycle

No damage, cracks or parts dislocation.

Contact resistance: 25 m ohms max. (Center)

15 m ohms max. (Outer)

Temperature: -40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C

Time: 30min. / 3min. / 30min. / 3min.

5 cycles

10. Salt spray No excessive corrosion 5% salt water solution, 48 hours

*V.S.W.R. Measurement System

The above V.S.W.R. standard values were measured using the measurement connection shown below.

■Material

●Plug-right angle

Part Material Finish/Remarks

Shell Phosphor bronze Silver plated

Insulator

PBT, Color: Black UL94V-0(040,066, LP(V)-040, 062, 088)

PBT, Color: Gray UL94HB(LP(V)-040HF)

LCP, Color: Milky-white UL94V-0(040HF,066HF, 068HF, 062HF, 088HF)

Female center contact Phosphor bronze Gold plated

●Receptacle

Part Material Finish/Remarks

Shell Phosphor bronze Silver plated

Insulator LCP, Color: Milky-white UL94V-0

Male center contact Brass Gold plated

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

■Receptacles

GND GND

SIG

Ø2

2.6

0.6

1.25

0.35

1.2Max(Note)

(3.1)

2.6

1.8

GND

U.FL-R-SMT-1

SIG

1.05±0.05 1±0.05

1±0.05

2.2±0.05

4±0.05

1.9±0.05

No conductive traces in this area

Recommended PCB

Mounting Pattern

Part No. HRS No. Packaging Weight / EA RoHS

U.FL-R-SMT-1(01)

331-0472-2 01 100 pcs/pack

15.7/mg

U.FL-R-SMT-1(60)

331-0472-2 60 4,000 pcs/reel

U.FL-R-SMT-1(80)

331-0472-2 80 10,000 pcs/reel

Note: This area may be covered by insulating material.

Embossed Carrier Tape Dimensions(IEC 60286-3 compliant)

Embossed Carrier Tape Dimensions

U.FL-R-SMT-1(60): 8mm pitch

U.FL-R-SMT-1(80): 4mm pitch

Reel Dimensions

Ø1.5

1.75

5.5

Center contact

Ø1.5

5.5 1.75

24Center contact

Unreeling direction

φ330

13.5

Material：

(Black)

(

SCALE FREE

)

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

■Cable Assembly (Plug)

●Cable Guide

Dia.0.81mm

Coaxial Cable

04 7/0.05 SA

(AWG#36)

Dia.0.4mm

FEP

Single

Shield TA

Dia.0.81mm

FEP 6.52dB/m 9.52dB/m

Dia.1.13mm

Coaxial Cable

068 7/0.08 SA

(AWG#32)

Dia.0.68mm

FEP

Single

Shield TA

Dia.1.13mm

FEP 3.73dB/m 5.44dB/m

Dia.1.32mm

Coaxial Cable

066 7/0.08 SA

(AWG#32)

Dia.0.66mm

FEP

Double

Shield TA

Dia.1.32mm

FEP 3.8dB/m 5.6dB/m

Dia.1mm

Coaxial Cable

062 7/0.071 SA

(AWG#33)

Dia.0.62mm

FEP

Tape, single

Shield TA

Dia.1mm

FEP 3.1dB/m 4.4dB/m

Dia.1.37mm

Coaxial Cable

Dia.1.37mm

Coaxial Cable

(data as provided by cable suppliers, for reference only)

* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire

088

7/0.102 SA

(AWG#30)

7/0.102 SA

(AWG#30)

Dia.0.88mm

FEP

Dia.0.88mm

FEP/PTEE

Single

Shield TA

Tape, Single

Shield TA

Dia.1.37mm

FEP

Dia.1.37mm

FEP

2.8dB/m

2.5dB/m

4.3dB/m

3.4dB/m

Description

Cable

Type

Cable Specification

Inner

Conductor*

Dielectric

Diameter

Outer

Conductor*

Jacket

Diameter

Flame Retardant

Grade

Nominal attenuation

At 3GHz

1.85

3.4

2.8

1.5

2.8

1.8

1.93

[Plugs can be ordered only as terminated cable assemblies.]

Part No.

Size

U.FL-LP-040

U.FL-LP-040HF

U.FL-LP-066

U.FL-LP-066HF

U.FL-LP-068HF

U.FL-LP(V)-040

U.FL-LP(V)-040HF(06)

U.FL-LP-062(06)

U.FL-LP-062HF(06)

U.FL-LP-088(06)

U.FL-LP-088HF(06)

Mated Height 2.5mm Max.

(2.4mm Nom.)

2.5mm Max.

(2.4mm Nom.)

2.0mm Max.

(1.9mm Nom.)

2.4mm Max.

(2.3mm Nom.)

2.4mm Max.

(2.3mm Nom.)

Applicable

cable Dia. 0.81mm Dia. 1.13mm and

Dia. 1.32mm Dia. 0.81mm Dia. 1mm Dia. 1.37mm

Weight (mg) 54 59 35 45.5 72

Environmental

compliant

The article excellent end HF other than halogen-free, it only as for RoHS compliant

VW-1

At 6GHz

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

How To Specify Cable Assembly

[Double-ended cable assembly] [Single-ended cable assembly]

U.FL

●Ordering information

●Standard tolerances for (L)

Ordering information

2LP

HF6

04N

「」

-- --

Double-

Ended

U.FL

HF6

04N

「」

-- --

Single-

Ended

Used plug: U.FL-LP(V)-040, U.FL-LP(V)-040HF(06)

U.FL-LP-040, U.FL-LP-040HF(Dia.0.81mm)

U.FL

2LP

HF6

068N

「」

-- --

Double-

Ended

U.FL

HF6

068N

「」

-- --

Single-

Ended

Used plug: U.FL-LP-066, U.FL-LP-068HF(Dia.1.13mm)

U.FL

2LP

HF6

066N

「」

----

Double-

Ended

U.FL

HF6

066N

「」

----

Single-

Ended

Used plug: U.FL-LP-066, U.FL-LP-066HF(Dia.1.32mm)

U.FL

2LP

HF6

062N

「」

-- --

Double-

Ended

U.FL

HF6

062N

「」

-- --

Single-

Ended

Used plug: U.FL-LP-062(06), U.FL-LP-062HF(06)(Dia.1mm)

U.FL

2LP

HF6

088K

「」

-- --

Double-

Ended

U.FL

HF6

088K

「」

-- --

Single-

Ended

Used plug: U.FL-LP-088(06), U.FL-LP-088HF(06)(Dia.1.37mm)

q Series name U.FL

w Assembly type

LP: Single ended LPV: Plug(V) Single ended

2LP: Double ended 2LPV plug(V) Double ended

e Environmental

compliant

HF6: Halogen-free

6: RoHS compliant

r Cable type

04N: Dia.0.81mm Ultra-fine coaxial cable

t Cable color 1: White, 2: Black

y Cable outer

conductor

TV: Tin plated braided wire

u Total length(mm) Length(L)

q Series name U.FL

w Assembly type LP: Single ended

2LP: Double ended

e Environmental

compliant

HF6: Halogen-free

6: RoHS compliant

r Cable type

068N: Dia.1.13mm Ultra-fine coaxial cable

t Cable color 1: Gray, 2: Black, 3: White

y Cable outer

conductor

T: Tin plated braided wire

u Total length(mm) Length(L)

q Series name U.FL

w Assembly type LP: Single ended

2LP: Double ended

e Environmental

compliant

HF6: Halogen-free

6: RoHS compliant

r Cable type

066N: Dia.1.32mm Ultra-fine coaxial cable

t Cable color 1: Gray, 2: Black

y Total length(mm) Length(L)

q Series name U.FL

w Assembly type LP: Single ended

2LP: Double ended

e Environmental

compliant

HF6: Halogen-free

6: RoHS compliant

r Cable type

062N: Dia.1mm Ultra-fine coaxial cable

t Cable color 1: Gray, 2: Black, 3: White

y Cable outer

conductor

D: Copper tape+ Tin plated braided

wire

u Total length(mm) Length(L)

q Series name U.FL

w Assembly type LP: Single ended

2LP: Double ended

e Environmental

compliant

HF6: Halogen-free

6: RoHS compliant

r Cable type

088K: Dia.1.37mm Ultra-fine coaxial cable

088N:

t Cable color 1: Gray, 2: Black, 3: White

y Cable outer

conductor

T: Tin plated braided wire

PD:

Copper tape + Tin plated braided wire

u Total length(mm) Length(L)

(L)(mm) Standard Tolera(mm)

*L=35 to 200 ±4

L=200 to 500 ±8

L=500 to 1000 ±12

L=Longer than 1000 ±1.5% of (L)

Note: Minimum available length(L) is 35mm

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

■Conversion Adapters

●SMA Conversion Adapter

(Mating portion: U.FL side jack - SMA side plug)

Note:

The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

■Receptacle to Inspection

This receptacle is used for inspecting the continuity, withstand

voltage, and other aspects of the harness product.

Note:

Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.

Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.

Plug Extraction Tool

This tool is used for extraction from a mating condition.

Plug Insertion Tool

This tool is for mating U.FL series plug into receptacle.

●SMA Conversion Adapter

(Mating portion: U.FL side plug - SMA side jack)

Note:

The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

●SMA Conversion Adapter

(Mating portion: U.FL side plug - SMA side jack)

Note: This connector is used by compressing the mated

portion of U.FL side onto the U.FL-R-SMT-1 portion.

(10.7) 8HEX

14.05

Ø6.35

1/4-36UNS-2A

6 5.6(4.05)

(18.6)

1/4-36UNS-2A

65.5

(4)

12.9

57HEX

M5∞0.5

(7.9)

(4.4)

U.FL

Ø15

(90)

2.1

(12.9)

JAPAN

For distinction with

W.FL-LP-IN.

8 Ø10

Part No. HRS No. RoHS

HRMP-U.FLJ(40) 311-0300-2 40

Part No. HRS No. RoHS

HRMJ-U.FLP(40) 311-0301-5 40

Part No. HRS No. RoHS

HRMJ-U.FLP-ST1(40)

311-0385-5 40

Part No. HRS No. RoHS

U.FL-R-1 331-0466-0

Part No. HRS No. RoHS

U.FL-LP-N-2 331-0494-5

U.FL-LP(V)-N-2 331-0493-2

Part No. HRS No. RoHS

U.FL-LP-IN 331-0334-9

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Usage Precautions

1. Plugs

(1) Mating / unmating

(2) Pull forces on the cable

after connectors are

mated.

(3) Precautions

1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the

connector flanges and pull off vertically, in the direction of

the connector mating axis.

2) To mate the connectors, the mating axes of both connectors

must be aligned and the connectors can be mated. The

"click" will confirm fully mated connection.Do not attempt to

insert on an extreme angle.

After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the

diagram below.

Do NOT forcefully twist or deform wires.

(1) Recommended reflow

temperature profile

(3) Recommended metal

mask thickness

(4) Reflow cycles

0.1 to 0.12 mm

2 times

(2) Recommended manual

soldering Manual soldering: 350˚C for 5 seconds

2. Receptacles

The temperature of the printed circuit

board surface temperature at the

points of contact with the terminals.

w Reflow soldering should be

performed at a printed circuit surface

temperature of 250°C max.

e In individual applications the actual

temperature may vary, depending on

the solder paste type, volume /

thickness and board size / thickness.

Consuly your solder paste and

equipment manufacturer for specific

recommendations.

(1) Operating environment

The connectors are not designed to operate in the following environments:

• Exposed to a excessive amounts of fine particles and dust

• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive

gasses.

• Environments having large rapid variations in temperature.

(2) Storage conditions -

Receptacle

Store in the Hirose Electric packaging.

Temperature: -10 to +40ç, Humidity: 85% max.

Use within 6 months of delivery.

Receptacles for which the storage period has elapsed must be tested for solderability to the PC board

mounting surface.

3. Operating environment and storage conditions

Extraction Tool

U.FL-R-SMT-1

U.FL Cable

Assembly

100

120

140

160

180

200

220

240

260

[ç]

Preheat

(130 to 180ç)

230ç

220ç

50 seconds max.

120 seconds max.

60 seconds max.

Time

250 ç max. for

10 seconds

1N max (U.FL-LP(V)-040, U.FL-LP-062)

2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)

1N max (U.FL-LP(V)-040, U.FL-LP-062)

2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)

3N max (U.FL-LP(V)-040, U.FL-LP-062)

4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)

U.FL-LP

Cable Assembly

U.FL-R-SMT-1

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

1/4-36UNS-2A

8HEX

4.5 8

■SMA cable type

SMA

Straight Plug

Straight Jack

Panel mount Jack

Panel mount Jack (Bulkhead)

8HEX

1/4-36UNS-2B

4∞Ø2.6

12.7

8.64

9.55

1.7

1/4-36UNS-2A

Ø6.4

8HEX

5.85 5.9

+0.1

Ø6.4

+0.1

111.5

Ø10

1/4-36UNS-2A

Part No. HRS No. Applicable cable RoHS

HRM-200-040PBN(40)

323-0790-3 40 Dia. 0.81 type

HRM-200-066PBN(40)

323-0791-6 40 Dia. 1.13, Dia.1.32 type

HRM-200-088PBN(40)

323-0800-5 40 Dia. 1.37, Dia.1.48 type

Part No. HRS No. Applicable cable RoHS

HRM-200-040JBN(40)

323-0792-9 40 Dia. 0.81 type

HRM-200-066JBN(40)

323-0793-1 40 Dia. 1.13, Dia.1.32 type

HRM-200-088JBN(40)

323-0801-8 40 Dia. 1.37, Dia.1.48 type

Part No. HRS No. Applicable cable RoHS

HRM-200-040PJ4BN(40)

323-0795-7 40 Dia. 0.81 type

HRM-200-066PJ4BN(40)

323-0796-0 40 Dia. 1.13, Dia.1.32 type

HRM-200-088PJ4BN(40)

323-0803-3 40 Dia. 1.37, Dia.1.48 type

9.55

1.7

1/4-36UNS-2A

Ø6.4

2×Ø2.6

Part No. HRS No. Applicable cable RoHS

HRM-200-040PJ2BN(40)

323-0794-4 40 Dia. 0.81 type

HRM-200-066PJ2BN(40)

323-0788-1 40 Dia. 1.13, Dia.1.32 type

HRM-200-088PJ2BN(40)

323-0802-0 40 Dia. 1.37, Dia.1.48 type

Part No. HRS No. Applicable cable RoHS

HRM-200-040BPJBN(40)

323-0797-2 40 Dia. 0.81 type

HRM-200-066BPJBN(40)

323-0798-5 40 Dia. 1.13, Dia.1.32 type

HRM-200-088BPJBN(40)

323-0804-6 40 Dia. 1.37, Dia.1.48 type

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Reverse polarity SMA

Straight Jack

Panel mount Jack

Panel mount Jack (Bulkhead)

Part No. HRS No. Applicable cable RoHS

SMA(R)-200-040JBN

323-0926-3 Dia. 0.81 type

SMA(R)-200-066JBN

323-0931-3 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088JBN

323-0904-0 Dia. 1.37 type

Part No. HRS No. Applicable cable RoHS

SMA(R)-200-040BPJBN

323-0927-6 Dia. 0.81 type

SMA(R)-200-066BPJBN

323-0902-5 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088BPJBN

323-0901-2 Dia. 1.37 type

4.5 8

1/4-36UNS-2A

8 HEX

Part No. HRS No. Applicable cable RoHS

SMA(R)-200-040PJ4BN

323-0928-9 Dia. 0.81 type

SMA(R)-200-066PJ4BN

323-0932-6 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088PJ4BN

323-0934-1 Dia. 1.37 type

1/4-36UNS-2A

1.7

9.55 8.64

12.7

4∞Ø2.6

Part No. HRS No. Applicable cable RoHS

SMA(R)-200-040PJ2BN

323-0929-1 Dia. 0.81 type

SMA(R)-200-066PJ2BN

323-0933-9 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088PJ2BN

323-0935-4 Dia. 1.37 type

1/4-36UNS-2A

1.7

9.55 8

12.2

2∞Ø2.6

+0.1

5.9

+0.1

Ø6.4

●Panel cut-out

1/4-36UNS-2A

17 8 HEX

1.5 11 5.85

Ø10

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

L mm

Note: Minimum available length(L) is 50mm

■How To Specify Cable Assembly

HRM

-- --AU.FL

Ordering information

q Series name HRM : SMA type

SMAR : Reverse polarity SMA

w Connector type P : Plug

J : Jack

PJ : Panel mount Jack(Four screws)

PJ2 : Panel mount Jack(Two screws)

BPJ : Panel mount Jack(Bulkhead)

e Cable type 04 : Dia. 0.81mm Coaxial cable

066 : Dia. 1.32mm Coaxial cable

068 : Dia. 1.13mm Coaxial cable

088 : Dia. 1.37mm Coaxial cable

r Cable color

1: White, 2: Black

066

068

088

1: Gray, 2: Black

t Total length(mm) Length(L)

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

4∞Ø2.6

17.9

9.55

12.7

8.64

1.7 1/4-36UNS-2A

17.9

9.55

1.7

1/4-36UNS-2A

12.2

2∞Ø2.6

17.9 8 HEX

11 5.851.5

1/4-36UNS-2A

Ø10

5.9

+0.1

Ø6.4+0.1

●Panel cut-out

1/4-36UNS-2A

5.08

12.7

9.7

6.4

5.08±0.05

4∞Ø1.5+0.1

5.08±0.05

●Panel cut-out

■SMA conversion adapter

SMA

Panel mount adapter

Panel mount adapter(Bulkhead)

PCB mount adapter

Part No. HRS No. RoHS

HRMJ-U.FLJ-PA4 311-0465-2

Part No. HRS No. RoHS

HRMJ-U.FLJ-PA2 311-0467-8

Part No. HRS No. RoHS

HRMJ-U.FLJ-BPA-4 311-0463-7

Part No. HRS No. Finish RoHS

HRMJ-U.FLJ-PC

311-0411-3 Nickel plated

HRMJ-U.FLJ-PC(01)

311-0411-3 01 Gold plated

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

17.9

1/4-36UNS-2A

12.7

9.55 8.64

1.7

4∞Ø2.6

2∞Ø2.6

17.9

1/4-36UNS-2A

9.55

1.7

12.2

17.9

1/4-36UNS-2A

9.55

1.5

8 HEX

5.85

5.9+0.1

Ø6.4+0.1

Ø10

●Mounting pattern

Reverse polarity SMA

Panel mount adapter

Panel mount adapter (Bulkhead)

Part No. HRS No. RoHS

SMA(R)J-U.FLJ-PA4 311-0466-5

Part No. HRS No. RoHS

SMA(R)J-U.FLJ-PA2 311-0468-0

Part No. HRS No. RoHS

SMA(R)J-U.FLJ-BPA-4 311-0464-0

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 10/2014. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Hirose Electric:

U.FL-2LP-068N1-A-(190) U.FL-2LP-062N1D-A-(500) U.FL-2LP-088K2T-A-(1300) U.FL(V)-040/CR-AD2(65) U.FL-

LP/CAB-MD(62) U.FL-066/CR-AD2(80) U.FL-LP(V)/SO-MD U.FL-066/CR-AD2(70) U.FL-LP(P)-068/CR-AD(66) U.FL-

066/SO-MD3 U.FL(V)-040/CR-AD2(67) U.FL(V)-040/CR-AD2(63) U.FL-LP(P)-068/CR-AD(64) U.FL-LP(V)/CAB-MD

U.FL-LP(P)-068/CR-AD(67) U.FL(V)-040/CR-AD2(64) U.FL(V)-040/CR-AD2 U.FL(V)-040/CR-AD2(61) U.FL(V)-

040/CR-AD2(62) U.FL(V)-040/CR-AD2(66) U.FL-066/CR-AD2(69) U.FL-LP(P)-068/CR-AD(65) U.FL-2LP-068N2-A-

(40).