80D
www.vishay.com Vishay Sprague
Revision: 20-Jul-16 1Document Number: 42060
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
+85 °C, Snap-In
FEATURES
• Useful life: 2000 h at +85 °C
• General purpose
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• High ripple capability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
Ø D x L in inches (mm) 1.38 x 3.15 (35.0 x 80.0)
Operating temperature -40 °C to +85 °C
Rated capacitance
range, CR82 μF to 56 000 μF
Tolerance on CR-10 %, +30 %
Rated voltage range, UR6.3 WVDC to 250 WVDC
Termination Snap mount
Life validation test
2000 h at 85 °C
CAP 15 % from initial
measurement.
ESR 1.5 x initial specified limit.
DCL initial specified limit
Shelf life
500 h at 85 °C
CAP 15 % from initial
measurement.
ESR 1.3 x initial specified limit.
DCL 2 x initial specified limit
DC leakage current
I = k
k = 4.0 at +25 °C
I in μA, C in μF, V in Volts
CV
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE MULTIPLIERS
-55 °C
-65 °C
-75 °C
-85 °C
2.0
1.7
1.4
1.0
FREQUENCY (Hz)
WVDC 50 TO 60 300 TO 1000 1000 AND UP
0 to 49
50 to 199
200 to 250
0.85
0.83
0.80
1.10
1.15
1.30
1.15
1.20
1.40
ESL (TYPICAL VALUES AT 1 MHz TO 10 MHz)
Nominal
Diameter
0.984
(25.0)
1.18
(30.0)
1.38
(35.0)
Typical
ESL (nH) 8.0 10.0 12.0
DIMENSIONS in inches (millimeters)
CASE
CODE
DIAMETER LENGTH CASE
CODE
DIAMETER LENGTH
D + 0.039 / - 0 (+ 1.0 / - 0) L ± 0.079 (2.0) D + 0.039 / - 0 (+ 1.0 / - 0) L ± 0.079 (2.0)
JA 1.00 (25.0) 1.00 (25.0) KD 1.18 (30.0) 1.57 (40.0)
JB 1.00 (25.0) 1.18 (30.0) KE 1.18 (30.0) 2.00 (50.0)
JC 1.00 (25.0) 1.38 (35.0) MB 1.38 (35.0) 1.18 (30.0)
JD 1.00 (25.0) 1.57 (40.0) MC 1.38 (35.0) 1.38 (35.0)
JE 1.00 (25.0) 2.00 (50.0) MD 1.38 (35.0) 1.57 (40.0)
KA 1.18 (30.0) 1.00 (25.0) ME 1.38 (35.0) 2.00 (50.0)
KB 1.18 (30.0) 1.18 (30.0) MF 1.38 (35.0) 2.50 (63.0)
KC 1.18 (30.0) 1.38 (35.0) MG 1.38 (35.0) 3.18 (80.0)
80D
www.vishay.com Vishay Sprague
Revision: 20-Jul-16 2Document Number: 42060
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING EXAMPLE
Electrolytic capacitor 80D series: 80D122P200ME2DE3
DIMENSIONAL AND AVAILABLE FORMS
DESCRIPTION
CODE EXPLANATION
80D Product type
122 Capacitance value (1200 μF)
P Tolerance (P = -10 % / +30 %)
200 Voltage rating at 85 °C (200 V)
ME Can size (see dimensions table)
2 PVC insulating sleeve
D Terminal style (D = 2 pin snap-in)
E3 RoHS compliant
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE (μF) PART NUMBER NOMINAL CASE SIZE
D x L
MAX. ESR (m) MAX. RIPPLE AT +85 °C (A)
120 Hz 10 kHz TO 40 kHz 120 Hz 10 kHz TO 40 kHz
16 WVDC AT +85 °C, SURGE = 20 V
8200.0 80D822P016JB2DE3 0.984 x 1.18 (25.0 x 30.0) 73.0 65.0 3.3 3.6
8200.0 80D822P016KA2DE3 1.18 x 0.984 (30.0 x 25.0) 91.0 84.0 2.8 3.0
10 000.0 80D103P016JC2DE3 0.984 x 1.38 (25.0 x 35.0) 59.0 53.0 3.9 4.2
15 000.0 80D153P016JE2DE3 0.984 x 1.97 (25.0 x 50.0) 37.0 33.0 5.6 6.0
22 000.0 80D223P016KE2DE3 1.18 x 1.97 (30.0 x 50.0) 35.0 32.0 5.8 6.1
33 000.0 80D333P016ME2DE3 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.4 10.0
25 WVDC AT +85 °C, SURGE = 30 V
4700.0 80D472P025JB2DE3 0.984 x 1.18 (25.0 x 30.0) 76.0 65.0 3.2 3.6
6800.0 80D682P025KB2DE3 1.18 x 1.18 (30.0 x 30.0) 71.0 63.0 3.4 3.6
10 000.0 80D103P025JE2DE3 0.984 x 1.97 (25.0 x 50.0) 39.0 33.0 5.4 6.0
10 000.0 80D103P025MB2DE3 1.38 x 1.18 (35.0 x 30.0) 38.0 33.0 5.5 6.2
15 000.0 80D153P025KE2DE3 1.18 x 1.97 (30.0 x 50.0) 36.0 32.0 5.7 6.1
22 000.0 80D223P025ME2DE3 1.38 x 1.97 (35.0 x 50.0) 19.0 17.0 9.1 10.0
2 Holes
0.079 [2.0]
Dia.
0.394
[10.0]
0.250
[6.3]
PVC
Sleeve
Insulating
Disc
0.394
[10.0]
STYLE D
80D
www.vishay.com Vishay Sprague
Revision: 20-Jul-16 3Document Number: 42060
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
35 WVDC AT +85 °C, SURGE = 44 V
6800.0 80D682P035KC2DE3 1.18 x 1.38 (30.0 x 35.0) 60.0 51.0 3.8 4.2
10 000.0 80D103P035MC2DE3 1.38 x 1.38 (35.0 x 35.0) 33.0 27.0 6.2 7.2
12 000.0 80D123P035KE2DE3 1.18 x 1.97 (30.0 x 50.0) 33.0 27.0 6.2 7.2
15 000.0 80D153P035ME2DE3 1.38 x 1.97 (35.0 x 50.0) 20.0 17.0 8.8 10.0
50 WVDC AT +85 °C, SURGE = 63 V
3300.0 80D332P050JD2DE3 0.984 x 1.57 (25.0 x 40.0) 57.0 42.0 3.9 4.9
3300.0 80D332P050KB2DE3 1.18 x 1.18 (30.0 x 30.0) 79.0 63.0 3.1 3.6
4700.0 80D472P050KD2DE3 1.18 x 1.57 (30.0 x 40.0) 51.0 41.0 4.3 4.9
6800.0 80D682P050KE2DE3 1.18 x 1.97 (30.0 x 50.0) 40.0 32.0 5.3 6.1
63 WVDC AT +85 °C, SURGE = 79 V
1500.0 80D152P063JB2DE3 0.984 x 1.18 (25.0 x 30.0) 82.0 55.0 2.8 3.8
2200.0 80D222P063KB2DE3 1.18 x 1.18 (30.0 x 30.0) 72.0 54.0 3.2 3.9
3300.0 80D332P063MB2DE3 1.38 x 1.18 (35.0 x 30.0) 40.0 28.0 5.0 6.6
4700.0 80D472P063KE2DE3 1.18 x 1.97 (30.0 x 50.0) 36.0 28.0 5.4 6.4
6800.0 80D682P063ME2DE3 1.38 x 1.97 (35.0 x 50.0) 21.0 15.0 8.3 10.0
100 WVDC AT +85 °C, SURGE = 125 V
680.0 80D681P100JB2DE3 0.984 x 1.18 (25.0 x 30.0) 139.0 85.0 2.2 3.5
1000.0 80D102P100KB2DE3 1.18 x 1.18 (30.0 x 30.0) 111.0 74.0 2.7 3.7
1500.0 80D152P100JE2DE3 0.984 x 1.97 (25.0 x 50.0) 68.0 42.0 3.9 5.9
2200.0 80D222P100KE2DE3 1.18 x 1.97 (30.0 x 50.0) 55.0 37.0 4.7 6.2
3300.0 80D332P100ME2DE3 1.38 x 1.97 (35.0 x 50.0) 50.0 37.0 5.2 6.2
200 WVDC AT +85 °C, SURGE = 250 V
150.0 80D151P200JA2DE3 0.984 x 0.984 (25.0 x 25.0) 660.0 375.0 1.3 3.2
220.0 80D221P200KA2DE3 1.18 x 0.984 (30.0 x 25.0) 460.0 272.0 1.7 3.6
330.0 80D331P200KC2DE3 1.18 x 1.38 (30.0 x 35.0) 278.0 165.0 2.4 4.9
470.0 80D471P200KD2DE3 1.18 x 1.57 (30.0 x 40.0) 220.0 131.0 2.8 5.7
680.0 80D681P200KD2DE3 1.18 x 1.57 (30.0 x 40.0) 248.0 127.0 2.1 4.7
820.0 80D821P200ME2DE3 1.38 x 1.97 (35.0 x 50.0) 130.0 82.0 4.3 7.4
1000.0 80D102P200ME2DE3 1.38 x 1.97 (35.0 x 50.0) 144.0 81.0 3.4 6.6
1200.0 80D122P200ME2DE3 1.38 x 1.97 (35.0 x 50.0) 141.0 75.0 3.4 6.6
250 WVDC AT +85 °C, SURGE = 300 V
100.0 80D101P250JA2DE3 0.984 x 0.984 (25.0 x 25.0) 720.0 377.0 1.1 3.2
150.0 80D151P250JB2DE3 0.984 x 1.18 (25.0 x 30.0) 541.0 284.0 1.4 3.8
220.0 80D221P250JD2DE3 0.984 x 1.57 (25.0 x 40.0) 343.0 182.0 2.0 5.2
330.0 80D331P250JE2DE3 0.984 x 1.97 (25.0 x 50.0) 263.0 140.0 2.5 6.3
470.0 80D471P250KE2DE3 1.18 x 1.97 (30.0 x 50.0) 185.0 101.0 3.2 7.0
680.0 80D681P250ME2DE3 1.38 x 1.97 (35.0 x 50.0) 191.0 81.0 4.0 7.4
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE (μF) PART NUMBER NOMINAL CASE SIZE
D x L
MAX. ESR (m) MAX. RIPPLE AT +85 °C (A)
120 Hz 10 kHz TO 40 kHz 120 Hz 10 kHz TO 40 kHz
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
