ECO-PACTM 3 Single Phase Full Controlled Rectifier Bridge, B2C PSBT 54 IdAV = 56 A VRRM= 800-1600 V + Preliminary Data Sheet VRSM VDSM (V) 900 1300 1500 1700 VRRM VDRM (V) 800 1200 1400 1600 Symbol IdAV ITSM ~ ~ Type PSBT 54/08 PSBT 54/12 PSBT 54/14 PSBT 54/16 - ECO-PACTM 3 Test Conditions TC = 85 C; per module A t = 10 ms (50 Hz), sine 550 A VR = 0 t = 8.3 ms (60 Hz), sine 600 A (50 Hz), sine 490 A VR = 0 t = 8.3 ms (60 Hz), sine 540 A TVJ = 45 C t = 10 ms (50 Hz), sine 1500 As VR = 0 t = 8.3 ms (60 Hz), sine 1490 As (50 Hz), sine 1200 As t = 8.3 ms (60 Hz), sine 1210 As 150 A/s TVJ = 125 C t = 10 ms VR = 0 (di/dt)cr 56 TVJ = 45 C TVJ = 125 C t = 10 ms i2 dt Maximum Ratings TVJ = 125 C repetitive, IT = 50 A f=50Hz, tP=200s VD=2/3VDRM IG=0.3 A non repetitive,IT = 1/2 IdAV 500 A/s 1000 V/s diG/dt=0.3A/s (dv/dt)cr TVJ = 125 C VD=2/3VDRM RGK= , method 1 (linear voltage rise) PGM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = 125 C tP=30s 10 W IT =ITAVM 5 W 0.5 W 10 V -40... + 125 125 C C -40... + 125 C 50/60 Hz, RMS t = 1 min 2500 V IISOL 1 mA 3000 V 1.5 - 2.0 14 - 18 46 Nm lb.in. g tP=300s t=1s Md Mounting torque (M4) Weight typ. Features * * * * * * Package with DCB ceramic base plate Isolation voltage 3000 V Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL Release applied Applications * * * * Supplies for DC power equipment Imput rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages * * * * * Easy to mount with four screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ ECO-PACTM 3 Symbol Test Conditions Characteristic Value ID, I R VT VTO rT VGT TVJ = 125C, VR = VRRM, VD=VDRM IT = 80 A, 1.64 V 0.85 V 11 m TVJ = 25 C For power-loss calculations only VD=6V 5 mA TVJ= 25C 1.5 V TVJ=-40C 1.6 V 100 mA IGT VD=6V TVJ= 25C TVJ=-40C 200 mA VGD IGD IL TVJ= 125C VD=2/3VDRM 0.2 V TVJ= 125C VD=2/3VDRM 5 mA TVJ= 25C, tP=10s, VD=6V 450 mA TVJ= 25C, VD=6V, RGK= 200 mA TVJ= 25C, VD=1/2VDRM 2 s 250 s 0.8 0.2 1.1 K/W K/W K/W 0.183 K/W 11.2 11.2 50 mm mm m/s IG=0.45A, diG/dt=0.45A/s IH tgd IG=0.45A, diG/dt=0.45A/s tq TVJ= TVJM; IT=20A; tp=200s;di/dt=-10A/s VR=100V; dv/dt=15V/s; VD=2/3VDRM RthJC RthJH per thyristor; DC per module per thyristor; DC per module ds dA a Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) Max. allowable acceleration Package style and outline Dimensions in mm (1mm = 0.0394") 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/