Single Phase Full Controlled PSBT 54 IdAV = 56 A
Rectifier Bridge, B2C VRRM= 800-1600 V
Preliminary Data Sheet
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 3
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
Symbol Test Conditions Maximum Ratings
IdAV TC = 85 °C; per module 56 A
ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 550 A
VR = 0 t = 8.3 ms (60 Hz), sine 600 A
TVJ = 125 °C t = 10 ms (50 Hz), sine 490 A
VR = 0 t = 8.3 ms (60 Hz), sine 540 A
∫∫
∫∫
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 1500 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 1490 A²s
TVJ = 125 °C t = 10 ms (50 Hz), sine 1200 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 1210 A²s
(di/dt)cr TVJ = 125 °C repetitive, IT = 50 A 150 A/µs
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.3 A non repetitive,IT = 1/2 IdAV 500 A/µs
diG/dt=0.3A/µs
(dv/dt)cr TVJ = 125 °C VD=2/3VDRM 1000 V/µs
RGK= ∞, method 1 (linear voltage rise)
PGM TVJ = 125 °C tP=30µs ≤10 W
IT =ITAVM tP=300µs ≤5W
PGAVM 0.5 W
VRGM 10 V
TVJ -40... + 125 °C
TVJM 125 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V∼
IISOL ≤ 1 mA t = 1 s 3000 V∼
MdMounting torque (M4) 1.5 - 2.0 Nm
14 - 18 lb.in.
Weight typ. 46 g
+
-
~
~
VRSM VRRM Type
VDSM VDRM
(V) (V)
900 800 PSBT 54/08
1300 1200 PSBT 54/12
1500 1400 PSBT 54/14
1700 1600 PSBT 54/16
Features
•Package with DCB ceramic base plate
•Isolation voltage 3000 V∼
•Planar glass passivated chips
•Low forward voltage drop
•Leads suitable for PC board
soldering
•UL Release applied
Applications
•Supplies for DC power equipment
•Imput rectifier for PWM inverter
•Battery DC power supplies
•Field supply for DC motors
Advantages
•Easy to mount with four screws
•Space and weight savings
•Improved temperature and power
cycling capability
•High power density
•Small and light weight
ECO-PACTM 3
http://store.iiic.cc/
ECO-PACTM 3
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Package style and outline
Dimensions in mm (1mm = 0.0394“)
Symbol Test Conditions Characteristic Value
ID, IRTVJ = 125°C, VR = VRRM, VD=VDRM ≤5mA
VTIT = 80 A, TVJ = 25 °C ≤1.64 V
VTO For power-loss calculations only 0.85 V
rT11 mΩ
VGT VD=6V TVJ= 25°C ≤1.5 V
TVJ=-40°C ≤1.6 V
IGT VD=6V TVJ= 25°C ≤100 mA
TVJ=-40°C ≤200 mA
VGD TVJ= 125°C VD=2/3VDRM ≤0.2 V
IGD TVJ= 125°C VD=2/3VDRM ≤5mA
ILTVJ= 25°C, tP=10µs, VD=6V ≤450 mA
IG=0.45A, diG/dt=0.45A/µs
IHTVJ= 25°C, VD=6V, RGK= ∞≤200 mA
tgd TVJ= 25°C, VD=1/2VDRM ≤2µs
IG=0.45A, diG/dt=0.45A/µs
tqTVJ= TVJM; IT=20A; tp=200µs;di/dt=-10A/µs 250 µs
VR=100V; dv/dt=15V/µs; VD=2/3VDRM
RthJC per thyristor; DC 0.8 K/W
per module 0.2 K/W
RthJH per thyristor; DC 1.1 K/W
per module 0.183 K/W
dsCreepage distance on surface (Pin to heatsink) 11.2 m m
dAStrike distance in air (Pin to heatsink) 11.2 m m
aMax. allowable acceleration 50 m/s²
http://store.iiic.cc/
