1
CSM_E39-L_F39-L_E39-S_E39-R_DS_E_15_1
Mounting Brackets
E39-L/F39-L
Slits/Reflectors
E39-S/E39-R
Mounting Brackets [Refer to Dimensions on page 5.]
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Model Fitting
materials Count
Accessories Applicable sensor
(mounting pitch on
sensor side)
Page
Description Material Count Dimensions
E39-L2 Iron, zinc plating 1 Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-RS30E4@ (25.4)
E3S-R1E4@ (25.4)
5
E39-L4 Iron, zinc plating 1 Slotted/Phillips screws M3 × 12
(with spring and plain washers) Iron, zinc plating 2 E32-T16 (20)
E39-L6 Iron, zinc plating 1 Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-RS30E4@ (25.4)
E3S-R1E4@ (25.4)
E39-L31 Iron, zinc plating 1 Slotted/Phillips screws, M3 × 12
(with spring washers) Iron, zinc plating 2 E3C-S50 (8)
E39-L40 Iron, zinc plating 1
Phillips screws M4 × 25
(with spring and plain washers)
Iron, zinc plating 2
E3JK
Nuts M4 Iron, zinc plating 2
E39-L41 Iron, zinc plating 2
Phillips screws M3 × 14
(with spring washers)
Iron, zinc plating 4
6
E3C-1 (10)
Plain washer M3 Iron, zinc plating 4
E39-L42 Iron,
black coating 2
Phillips screws M3 × 10
(with spring washers)
Plain washer M3
Iron, zinc plating
Iron, zinc plating
4
4
E3C-2 (20)
E3C-DS10 (19)
E3C-VS1G (19)
E3C-VS3R (19)
E39-L43 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
E39-L44 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
E39-L51 Iron, zinc plating 1
Slotted/Phillips screws M4 × 30
(with spring and plain washers)
Iron, zinc plating 2E3JM (40)
Nuts M4 Iron, nickel plating 2
E39-L53 Iron, zinc plating 1 --- --- --- E3JM (40)
E39-L54V Stainless steel
(SUS304) 1 --- --- --- E32-T54V
6
E39-L69 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3S-R1@ (20)
E3S-R3@ (20)
E39-L70 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3S-R6@ (20)
E3S-R8@ (20)
E39-L83 Stainless steel 1 --- --- --- E32-T24S
E32-A03
E39-L85 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (25.4)
E39-L86 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (25.4)
E39-L87 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (25.4)
E3S-CR62/67 (25.4)
2
E39-L/F39-L/E39-S/E39-R
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Model Fitting
materials Count
Accessories Applicable sensor
(mounting pitch on
sensor side)
Page
Description Material Count Dimensions
E39-L93FH Stainless steel
(SUS304) 1
Holder (upper) Heat-resistant ABS resin 1
E3Z (25.4)
E3S-R1@/R3@
/R6@/R8@ (20)
E39-R1/E39-R3
8
Holder (lower) 66 nylon 1
Pipe Stainless steel (SUS304) 1
E39-L93FV Stainless steel
(SUS304) 1
Bolts M4 × 12 with Hexagonal
holes
Iron, nickel plating 2
Bolts M4 × 30 with hexagonal
holes
Iron, nickel plating 1
E39-L93H Stainless steel
(SUS304) 1Phillips screws M3 × 12
(with spring and plain washers)
Stainless steel (SUS304) 2
E39-L93V Stainless steel
(SUS304) 1
Spring washer M4 Iron, nickel plating 1
Plain washer M4 Iron, nickel plating 1
Nuts M4 Iron, nickel plating 3
E39-L93XY --- ---
Holder 66 nylon 1 E3Z (25.4)
E3S-R1@/R3@
/R6@/R8@ (20)
E39-R1/E39-R3
9
Pipe Stainless steel (SUS304) 1
Bolts M5 × 16 with hexagonal holes Stainless steel (SUS304) 2
Nuts M5 Stainless steel (SUS304) 2
E39-L94 Iron, zinc plating 2 Phillips screws M3 × 10 Iron, zinc plating 4 E32-T16P (19)
Nuts M3 Iron, zinc plating 4
E39-L96
* For installation
of Sensor
Adjuster E39-
L93
Stainless steel
(SUS304) 1Phillips screws M3 × 6
(with spring and plain washers) Iron, nickel plating 2 E39-R1
E39-L97 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3S-R1@/R3@ (20)
E39-L98 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2
E3Z pre-wired model
(25.4)
E3S-R6@/R8@ (20)
E39-L102 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (horizontal type)
(25.4)
10
E39-L103 Stainless steel
(SUS304) 1Hexagonal bolts M4 × 12
(with spring and plain washers) Iron, zinc plating 2 E3S-C (vertical type) (25.4)
E3S-CR62/67 (25.4)
E39-L104 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2
E3Z pre-wired model
(25.4)
E32-R21 (for installation of
E39-R3) (25.4)
E39-L109 Stainless steel
(SUS430) 1 --- --- --- E32-S15-@ (13.2)
E39-L114 Stainless steel
(SUS430) 2 Phillips screws M5 × 10 Iron, zinc plating 4 E3MC (28)
E39-L115 Stainless steel
(SUS304) 1Phillips screws M5 × 8 Iron, zinc plating 4 E3MC
Slotted/Phillips screws M3 × 8 Iron, nickel plating 2
E39-L116 Stainless steel
(SUS304) 1 --- --- --- E3T-S (9/15)
11
E39-L117 Stainless steel
(SUS304) 1 --- --- --- E3T-S (9/15)
E39-L118 Stainless steel
(SUS304) 1 --- --- --- E3T-S (9/15)
E39-L119 Stainless steel
(SUS304) 1 --- --- --- E3T-F (8)
E39-L120 Stainless steel
(SUS304) 1 --- --- --- E3T-F (8)
E39-L127-T1 Iron, zinc plating 1 Phillips screws M2.3 × 8 Iron, zinc plating 4
E3C-S10 (7.5)
Spring washer M2.3 Iron, zinc plating 4
E39-L127-T2 Iron, zinc plating 1 Phillips screws M2.3 × 8 Iron, zinc plating 4
Spring washer M2.3 Iron, zinc plating 4
E39-L127-T3 Iron, zinc plating 1 Phillips screws M2.3 × 8 Iron, zinc plating 4
Spring washer M2.3 Iron, zinc plating 4
E39-L/F39-L/E39-S/E39-R
3
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Model Fitting
materials Count
Accessories Applicable sensor
(mounting pitch on
sensor side)
Page
Description Material Count Dimensions
E39-L131 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 25 Stainless steel (SUS304) 2
E3G-R1@ (25)
E3G-L7@ (25)
12
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L132 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 25 Stainless steel (SUS304) 2
E3G-R1@ (25)
E3G-L7@ (25)
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L135 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 35 Stainless steel (SUS304) 2
E3G-MR19 (T)
E3G-ML79 (T)
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L136 Stainless steel
(SUS304) 1
Slotted/Phillips screws M4 × 35 Stainless steel (SUS304) 2
E3G-MR19 (T)
E3G-ML79 (T)
Spring washer M4 Stainless steel (SUS304) 2
Plain washer M4 Stainless steel (SUS304) 2
Nuts M4 Stainless steel (SUS304) 2
E39-L142 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
E39-L143 Stainless steel
(SUS304) 1 None --- ---
E3X-DA-S/MDA
E3X-NA
E3C-LDA
E2C-EDA
E4C-UDA
E39-L144 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 12
(with spring and plain washers) Stainless steel (SUS304) 2 E3Z pre-wired model
(25.4)
13
E39-L148 Stainless steel
(SUS304) 1 None --- --- E3X-NA
E39-L149 Iron,
black coating 1 None --- E3Z-G
E39-L150 Stainless steel
(SUS304) 1
Holder/bracket PBT (polybutylene tereph-
thalate) 1
E3Z (25.4)
E3S-R6@/R8@ (20)
E39-R3
Shaft (brace) Stainless steel (SUS304) 1
Bolt with hexagonal hole Stainless steel (SUSXM7) 1
Nut Stainless steel (SUS304) 1
Phillips screw Stainless steel (SUSXM7) 1
Slotted/Phillips screws Stainless steel (SUS304) 2
E39-L151 Stainless steel
(SUS304) 1
Holder/bracket PBT (polybutylene tereph-
thalate) 1
E3Z (25.4)
E3S-R6@/R8@ (20)
E39-R3
Shaft (brace) Stainless steel (SUS304) 1
Bolt with hexagonal hole Stainless steel (SUSXM7) 1
Nut Stainless steel (SUS304) 1
Phillips screw Stainless steel (SUSXM7) 1
Slotted/Phillips screws Stainless steel (SUS304) 2
E39-L153 Stainless steel
(SUS304) 1Slotted/Phillips screws M3 × 8
(with spring and plain washers)
Stainless steel (SUSXM7)
Stainless steel (SUS304) 2E3Z pre-wired model
(25.4)
4
E39-L/F39-L/E39-S/E39-R
Contact Mounting Plates [Refer to Dimensions on page 13.]
Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories.
Slits
Note: Applicable models that appear shaded come with the Slits at left as accessories
Reflectors (Refer to Dimensions on page 14.)
*1. 40° or higher for E3JM-R and E3JK-R.
*2. 40° or higher for E3G-R.
* Models ending in the suffix “-CA” are reflectors only for E3T-SR4@.
Model Material Count Applicable type Page
Dimensions
E39-L60 PBT (polybutylene terephthalate) 1 E3S-R@613
Model Slit width Installation procedure Applicable type
E39-S39 Width 1 × 20 mm Seal type E3JM-10@4 (T)-N
E3JK-5@@-N
E39-S60 Width 0.5, 1 × 15 mm Seal type E32-T16
E39-S61 Width 0.5, 1, 2, 4 × 11 mm
Plug-in type
E3S-CT@1
E39-S63 0.5-mm dia., 1 mm E3T-ST1@
E39-S64 0.5-mm dia., 1 mm E3T-FT1@
E39-S65A 0.5 mm dia.
E3Z-T@@
E39-S65B 1-mm dia.
E39-S65C 2-mm dia.
E39-S65D Width 0.5 × 10 mm
E39-S65E Width 1 × 10 mm
E39-S65F Width 2 × 10 mm
E39-S68 Width 0.5, 1 × 13.4 mm Seal type E32-T16P
E32-T16PR
Name Reflectors Non-fogging
reflective plate Reflectors Special Reflec-
tor for E3ZM-B
Item Model E39-R1 E39-R1S E39-R1K E39-R2 E39-R6 E39-R10 E39-RP1
Directional angle 30° min. *130° min. *230° min.
Ambient operating
temperature range −25 to 55°C−40 to 60°C
Ambient storage
temperature range −40 to 70°C−40 to 55°C−40 to 70°C
Ambient operating
humidity range 35% to 85% 35% to 95% 35% to 85%
Ambient storage
humidity range 35% to 95%
Degree of protection IEC IP67
Accessories ---
Name Small reflector Tape reflector *
Item Model E39-R9 E39-R3 E39-R4 E39-R37-CA *E39-RS1
E39-RS1-CA
E39-RS2
E39-RS2-CA
E39-RS3
E39-RS3-CA
Directional angle 30° min.
Ambient operating
temperature range −25 to 55°C
Ambient storage
temperature range −40 to 70°C 0 to 40°C
Ambient operating
humidity range 35% to 95% 35% to 85%
Ambient storage
humidity range 35% to 95% 35% to 85%
Degree of protection IEC IP67
Accessories ---
Mounting Brack-
ets E39-L104
(with screws)
---
Phillips screws M3
× 3, spring wash-
ers M3, nuts M3
---
Name Laser Reflectors
Standard Short-distance transpar-
ent object detection Sheets
Item Model E39-R12 E39-R13 E39-R14 E39-RS4 E39-RS5
Ambient operating
temperature range −10 to 55°C (No icing)
Ambient storage
temperature range −25 to 70°C (No icing)
Ambient operating
humidity range 35 to 85% (No condensation)
Ambient storage
humidity range 35 to 85% (No condensation)
E39-L/F39-L/E39-S/E39-R
5
Mounting Bracket Dimensions (Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
5
25
5
4.2
10.2
20.2
25.4
5.6
41
2.1R
4.2
25.4
Two, M4
slotted,
hexagonal
bolts
92.1
82.1
9 29.1
1.6
Optical axis
E39-L2
Material: Iron
E39-L4
Material: Iron
4
20
11
2.3
3.2
Four,
R1.6
Two,
3.2 dia.
1.2
5.5
20±0.2
58
33
5
3.2
4
3.2
20
Four, R1.6
E39-L6
4.2
4.2
4.2
5
5
25.4
6.5
(R2.1)
5
4.2
12
12
20
20
5
25.4 6.5
39
1.6
Material: Iron
E39-L31
Material: Iron
4.5 dia. max.
Pushing out height: 0.6 min.
10.5
3.2
17
12
4.2 3.2
3.9
6
10.5
3.2
17
Four, R1.6
4.2 3.2
3.9
6
1
8
6
R3 Two, M3
1
12 22
42
±0.1
50
40
±0.1
58
24 4.4
10°
45°
Two, R5.6
31.2
R2.2
R2.2
60°
2
21.9
Two, R5 Two, R5
Two, 4.4 dia.
5
Two, R5
60
49
18
±0.1
6 dia.
7
6.4
10
±0.1
R3.2 R3.2
6.4
Two, R5
R56.6
±0.1
E39-L40
Material: Iron
6
E39-L/F39-L/E39-S/E39-R
Material: Iron
10±0.1
R3
1
2-M3
6
4.5 dia. max.
Pushing out height: 0.6 min.
13.5
17.5
3.2
3.2
75.5
R1.6
R1.6
1
11
15.5
10
3.2
5
3.2
11.5
5
E39-L41 E39-L42
Material: Iron
23
27
6.5
3.2
12
4.5
3.2 8
3.2
21
15.5
4.5 R1.6
R1.6
17
3.2
1
13 6
3.4 5
30
1.2 3.5 3.5
R2
R2
3.4 15
40
25.4
7
7.5
Four, 3.2 dia.
R1
20°
R20
±0.1
Material: Stainless
steel (SUS304)
E39-L43 E39-L44
16.2
8.7
1.2
3.4 R1
3.2 dia.
R1
R2
31.2
18
9
614
6
R25.4
±0.1
36
1.2
23.2
3.5 R3.5
3.2
20°
Material: Stainless
steel (SUS304)
E39-L51
E3A2
E3A-M
E3A3
OA-5, OA-5N
E3A2, OA-5N
E3A-M, OA-5
E3A3
58
70
45
35.5
37.5
Material: Iron
E39-L53
6.4
6.5 Two, 3 dia.
20 R3.2
R3.2
12
12.4
6 dia.
18 6
6.4
12.4 22
39.5
35
4.5
40±0.2
29.5
6.5
5
20
13.5
R2.25 4.5 dia.
1.6
54.5
Material: Iron
E39-L54V
Material: Stainless steel (SUS304)
0.5
4
4.5 8
23 15
4.1
4.1
E39-L69
Material: Stainless steel (SUS304)
3.1
16.5
10.7
3.1 16.5
10.7
7.2
7.2
7.2
3.1
7.2
3.2
3.1
1.2
3.2
520±0.2
5
30
20±0.2
E39-L/F39-L/E39-S/E39-R
7
E39-L70
3.1
7.2
16.5
16.5
10.7
7.2
3.1
7.2 7.2
11.4 3.1
31.7±0.1
3.1 2.05
2.05
10.7
7.2
2.05
3.1
1.2
16.3
16.3
20±0.2
20±0.2
41.7
Material: Stainless steel (SUS304)
1.8
17.6113.5 4.3
0.4
Two, R1.6
Six, R1.2
R1.6
3.2
3.2
10
2.8
E39-L83
Material: Stainless steel
9.8 15.6
31
16
2.6
4.2
4.2
4.2
4.2
9.2
12.9
8
8
28.9 32.2
15.1
1.5
15
3237
(44.7)
43.8
19
E39-L85
Material: Stainless steel (SUS304)
E39-L86
32.239
9.2
4.2
9.2 20
12
4.2
4.2
12.9
31
20
2.6
43.8
1.5 12.9
4.2
31
Material: Stainless steel (SUS304)
E39-L87
1.5
25
10
4.2
12.4
4.1
6.2 8.2
7.2
15
2.6
25.4 41
10
9.2 4.2
75.6
25.4
43.7
4.2
4.2
Material:
Stainless steel (SUS304)
8
E39-L/F39-L/E39-S/E39-R
35
59
6
30
54
183 188
215
8
26.3
20.9
12 dia.
26
50
22.5
45
48
48
15°
15°
Two, 6.6 dia.
E3Z
E39-L93FH
35
50
53
12
24
48
176 181
208
8
26.3
20.9
12 dia.
29
53
48
15°
15°
Two, 6.6 dia.
E3Z
E39-L93FV
59
8
10
30
54
184 189
216
8
26.3
20.9
12 dia.
48
15°
15°
27
34
14
45
32
Two, 6.6 dia.
E3Z
E39-L93H
32
46
49
10
20
44
176 181
208
8
26.3
20.9
12 dia.
24
48
48
15°
15°
Two, 6.6 dia.
8
15
E3Z
E39-L93V
E39-L/F39-L/E39-S/E39-R
9
40
213
38
26.3
20.9
8
170
11
15°15°
23 Pipe (B)
Holder (A)
15
24
48
189
197
165
22
12 dia.
8
12 dia.
E3Z
E39-L93XY
Note: The E39-L93XY consists of only the one joint holder
(A) and pipe, and the two hexagonal bolts and nuts. It
cannot be mounted to the Sensor alone.
E39-L94
4
20
2.3
3.2
3.2 dia.
1.2
5.8
19
±0.2
52
35
3.2
4.8
3.2
4
20
Two, R1.6
Four, R1.6
+0.2
0
Material: Iron
E39-L96
29.5
9.5
60
15.5 Center
of pole
brace
E39-R1 reflector
(order separately)
E39-L96
27
17.5°
17.5°
45°
4.3 dia.
45°
34.5
4.6
4.6
Two, M3 Tap processing
Material:
Stainless steel
(SUS304)
2-mm-thick
20
20
3
26
2
56
16
An attached
screw
20
20
44±0.2
Two, M6
34
13.5
56 dia.
30°30°
Stainless steel
(SUS 304)
Four, R3.3 Two, R22
(E3S-R)
E3S-R 16
2.6
50
15
E39-L97
Mounting Holes
56 dia.
Two, R22
4 6.5
(For E3S-B)
(For E3Z) (For E3S-R)
20
16
25
Four, R3.3
Two, R28
Stainless steel
(SUS 304)
44
±0.2
Two, M6 30°30°
25.4
An attached
screw
8.2
E3S-R
8
24
34
48
56
16 2
61
38.5
(A)*
* Mounting Bracket can be attached to side (A)
Mounting Holes
E39-L98
10
E39-L/F39-L/E39-S/E39-R
E39-L102
1.5
38.2
4.2
8.3
8.3
6.2
6.2
4.2
4.2
9.2
9.2
9.317.
3
4.2 12 20
25.4
±0.1
25.4
±0.1
Material:
Stainless steel (SUS304)
E39-L103 31
±0.1
31
±0.1
43.8
4.2
9.2
4.2
9.2
12 20
4.2
12 20
4.2
12.9
12.9
1.5
Material:
Stainless steel (SUS304)
E39-L104
R1
R1
R1.7 R1.7 3.4
5.8 12.5 (13.7)
4.5
6
29
3.4
R20
14°
Two, 3.2 dia.
3.5
16
R3.5
37.8
(39)
3.2
R25.4
10°
R1.6
8.8
1.2
Material:
Stainless steel
(SUS304)
E39-L109
Material:
Stainless steel
(SUS430)
4636
6
3.2 8.2 8.2
32.6
(14.7)
45.8
12
10.6
5.4
3.4
3.4
26
6
Two, M3
36
Mounting Holes
E39-L114
10
28
70
54
3
R28R28
50
5.2
5.2 8.4 33.2 Six, R2.6
15°
15°
R1
11
5.2
6.8 6.8
22
Material:
Stainless steel (SUS430)
E39-L115
58
7
26
100
21 35
Four, 5.5 dia.
37
33
515
42
11.5
Two,
M3 28
Material: Stainless steel (SUS304)
E39-L/F39-L/E39-S/E39-R
11
E39-L116
7.5
(17.8)
4.1 Two, 3.4
(Two, R2)
(Two, R2)
(Two, R1.1)
(Two, R1.2)
(Two, R1.7)
5
1.6
4
11
9.5
2.2
31.2
2.4
10
90°
1.2
R1.5 max.
7
15 20.5
9
Three,
M2
(Four, R2)
3
Nut Plate
Material:
Stainless steel (SUS304)
1.2-mm-thick
3.1
3.1
1811.5
11.2
3.4
4.5
Two, R2(Two, R1.7)
(Two, R1.7)
90°
R1
max.
2.4
(23) 15
9
4
9
Two, 2.2
5
510
(11.2)
(Two, R1.1)
(Two, R2)
1.2
7
15 20.5
9
Three,
M2
(Four, R2)
3
Nut Plate
E39-L117
Material:
Stainless steel (SUS304)
1.2-mm-thick
E39-L118
90°
90°
11.5
11.5
22.7
5
2.4
Two, 2.2
4
9
9
15
4.5 (Two, R1.7)
53.4 (Four, R2)
(Two, R1.1)
(23)
1811.5
3.1
3.1
1.2
7
15 20.5
9
Three,
M2
(Four, R2)
3
Nut Plate
Material:
Stainless steel (SUS304)
1.2-mm-thick
E39-L119
1216
90°
8
Four, M2 Tap processing
97
3.2
2.4
8
2.4
15
10.5
1.2
Material:
Stainless steel (SUS304)
1.2-mm-thick
1216
8
Four, M2 Tap processing
13.56
3.2
2.4
2.4
8
14
22.5
4.2
(5.4)
1.2
E39-L120
Material: Stainless steel (SUS304)
1.2-mm-thick
E39-L127-T1
E39-L127-T2
E39-L127-T3
4
A
20
Two, 5 dia.
A+24
5.6
Four, M2.3
(Mounting sensor
screws)
2.3
7.5
12
5.6
1.6
20
Four, 3.2 dia.
(Mounting
bracket holes)
10
30
15
9
Material: Iron
Model Dimension A (mm)
E39-L127-T1 10
E39-L127-T2 20
E39-L127-T3 30
12
E39-L/F39-L/E39-S/E39-R
E39-L131
11.5
22
1.5
Two, R3.2
15°
R34
5.5
23.5
6.4
2-R3.2
45
25
±0.1
35
25
±0.1
65.5
Two,
4.2 dia.
Four, R2.1
4.2
R25
Four, R1
4.2
R25
23.5
35.5
8.5
90°
±1°
6.4
Material:
Stainless steel (SUS304)
E39-L132
1.5 90°
±1°
11.5
22
6.4
Two, R3.2 15°
R34
4.2 dia.
25
±0.1
4.4
10
Two, R2.2
5.5
23.5
11.5
8.5
4
5
23.5
6.4 Two, R3.2
Material: Stainless steel (SUS304)
E39-L135
48
Two, 4.2 dia.
58
74±0.1
118 123
54.62
37±0.1
10°
Four, R2.1
2-4.2
R82.8
6.4 Two, R3.2
32 7
18°
R44
28
15
6.4
Two, R3.2
2
90°±1°
Material:
Stainless steel (SUS304)
E39-L136
5°
Eight, 4.2
Fourteen,
R2.1
R82.7
R82.7
R82.7
85 74
5.5
5°
2°
5°
5°
2°
88
90
83
74
72
37
6.4
32
20.5
18°
R44
2
28
15
6.4 Two,
R3.2
Two,
R3.2
90°
±1
Material: Stainless steel (SUS304)
E39-L142
37
55
12
4.5
R12
14°
5
4
7.8
4.5
7
4.5 15.3
25.4
1.5
15.8 22 7
8.7
14
14 Four, 3.4-dia. hole
s
Material: Stainless steel (SUS304)
Material: Stainless steel (SUS304)
(10.3)
7
3.4
1
3163
710.3
7.3
5.3
2.5
34.8
22
16
26.8
3
3.4
1
Two, 3.2 dia.
Four, R1.7
10 max.
E39-L143
E39-L/F39-L/E39-S/E39-R
13
Contact Mounting Plate
E39-L144
38.5
7.3
25.4 Two, R25.4
1.5
14.2
25
Four, R1.6
Two, 50°
Two, R17
23
21
3.5
Four, R1.6
5°
Material: Stainless steel (SUS304)
E39-L148
12
1.5
9.1
12 max. 9 3.4
2
R1.7
R1.7
2
16
27
3
4
3
4.3
Two, 3.2 dia.
7.3
35
22
3.4
16
9.5
Material: Stainless steel (SUS304)
52
4513.6
5.5
24
4.5
1942.5
1
40.5
10.5
Four, R3
Four, 4.5 dia.
E39-L149 E39-L150
E39-L151
Model L
E39-L150 65
E39-L151 165
Length (mm)
34 32 19
46
L
35
21
Two, 6.5 dia.
10 dia.
Two, 3.5 dia.
5.4
5.5
4.5
22.7
6.8
20
14
Two, 3.5
Stainless steel
(SUS 304)
Polybutylene
terephthalate
Polybutylene
terephthalate
8
E39-L153 14
8
22
10
41
25.4
Four, 3.5
3.5
4-3
Eight, R1.75
4
7
7
3.5
4
Two, R1.75
1.2
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-L60
(33) 11.75
2.5
3.4 dia.
3.4 dia.
20
6.5
11.75
5
5
2.5
6.5
Material: PBT (polybutylene terephthalate)
14
E39-L/F39-L/E39-S/E39-R
Reflector dimensions (Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-R1
E39-R1S
E39-R1K *
34
40.3
5259.9
2.7
8
1.6
7.5
7
Two, 3.5 dia.
Material,
reflective surface: acrylic
Rear surface: ABS
* E39-R1K only
Coating on reflective surface
E39-R2
Material,
reflective surface: acrylic
Rear surface: ABS
74.5
80.8
5259.9
2.7
1.6 7
6.5 34
7.5
7
8
7
Four, 3.5 dia.
E39-R9
42.3
30.9 × 30.9
15
25
35.4
8
3.5
5.5
8
(21)
4
Two,
3.6 dia.
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R10
30
47 × 47
Two,
4 dia.
10
(30.4)
5
61.4
40
51.6
3.5
5.5
8
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R3
29
4.5 6
R20
3.4
7
18.45
22.9
11
20 0.2
0.2
16
22.5
19.3
34
3834.8
Two,
M3
41.8
10.1 1.2
25.4 R25.4
3.2
10°
1.2
2.6
Stainless
steel
(SUS304)
Adhesive tape side
Two, 3.2 dia.
13.7
14°
3.4
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R4
13.7
9.7
2
4
23 19
Two, 2.2 dia. 1.4
4.9
4
2
Material,
reflective surface: acrylic
Rear surface: ABS
4060
34
40
52
3.5
3.5
4.8
E39-R6
Material,
reflective surface: acrylic
Rear surface: ABS
E39-R37-CA
10.2
8.7 (1.1)
13.7 13.7 Eight, R1
18.323 18.3 23
Two, R1.55
Mounting
Bracket: t 0.5
Two, 3.1 dia.
Reflector: t0.5
(adhesive tape side)
Reflector
Mounting bracket
Note: The reflective plate and mounting plate (1) come as a set.
Reflectors only for E3T-SR4@.
Material:
Mounting plate: stainless steel (SUS301)
Reflective surface: acrylic
Retroreflector for E3ZM-B
E39-RP1
72 63.680
44
Two, 3.5 dia.
Reflector
3
8.5
0.2
E39-L/F39-L/E39-S/E39-R
15
* Models ending in the suffix “-CA” are reflectors only for E3T-SR4@.
Sensitivity Adjuster
Sensitivity Adjustment Driver
E39-RS1
E39-RS1-CA *
35
Four, R1 Adhesive
tape side
0.5
10
Material: Acrylics
E39-RS3
E39-RS3-CA *
Material: Acrylics
80
Four, R1
70
0.5
Adhesive
ta
p
e side
E39-RS2
E39-RS2-CA *
Material: Acrylics Four, R1
40 0.5
35
Adhesive
tape side
37
7.3R
23
7.3R
15
30
23
45
5.5
2.9
Two, 3.4 dia.
Four, R1.4
Four, R3
1.6
24
17.2
4
7
2.3R
2.3R
712
6
Two, 3.4 dia.
Four, R2
Four, R1
E39-R12/R14 E39-R13
195
22
0.4
Adhesive
tape side
108
46
0.4
Adhesive
tape side
E39-RS4 E39-RS5
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-
G
1
Material: Polycarbonate
4
9.3 dia.13 dia.
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-
G
2
8 dia.
7 dia.
0.8 1
(12.6)
Material: Polycarbonate
16
E39-L/F39-L/E39-S/E39-R
Connection Sockets
Lens Unit (Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
E39-F1V
8.9
0.5-dia. hole
6M2.6 × 0.45
Effective depth: 3.8
Countersunk with straight edge,
depth: 0.9
4 dia.
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Front
C
onnection
S
ocket
PF113A 4
31 max.
35.4
722
Eleven, M3.5 × 7
Sems screw
23.5
43 max.
34 45
4
52 max.
34±0.2
Two, M4 or 4.5 dia.
101112
8
9
765
4
3
Mounting Holes
Terminal arrangement/Inter-
nal connections (top view)
Note: Rail mounting also possible.
Front
C
onnection
S
ocket
PYF08A Two, M3 or M
4
or 4.5 dia.
59±0.3
6
4
35.4
3.4
16.5
23 max.
30 max.
15±0.2
72 max.
6Eight, M3 × 8
Sems screw
Two, 4.2 × 5 mounting holes
1
5
9
12
14 13
8
4
Mounting Holes
Terminal arrangement/Inter-
nal connections (top view)
Note: Rail mounting also possible.
5.8
13.2
12.65
4.1
6.35
4.2
25.8±0.2
21.4+0.2
0
Eight, 1.3 dia. holes
6.4
29.5 max.
25.5 max.
2.6
24 max.
20 max.
7.7
Eight, 3 × 1.2 ellipse hole
2.7
9
13 14
12
8
41
5
Front Connection Socket
PY08
Terminal arrangement/Internal
connections (bottom view) Mounting Holes
PCB Cutout Dimensions
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
México DF • 52.
55.59.01.43.00
• 001.800.556.6766 • mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Apodaca, N.L. • 52.81.11.56.99.20 • 001.800.556.6766 • mela@omron.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
OMRON INDUSTRIAL AUTOMATION • THE AMERICAS HEADQUARTERS
Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROpE B.V. •
Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands.
•
Tel: +31 (0) 23 568 13 00
Fax: +31 (0) 23 568 13 88
•
www.industrial.omron.eu
Cat. No. &60B(/B)/B(6B(5B'6B(BB 0/12 Note: Specifications are subject to change. © 2012 Omron Electronics LLC Printed in U.S.A.
