PC BOARD CONNECTORS 700 SERIES FEATURES The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder dip section is a 0.5 mm (0.020 in.) square and can be used in a 0.8 mm (0.031 in.) through hole. Special strain relief prevents breakage. Two kinds of keys and bump polarization prevent incorrect insertion. Connectors with 4 mm (0.157 in.) long tails are also available for mounting on multilayer PC boards. SPECIFICATIONS Item Specification Operating temperature range -55C to +105C Current rating DC 1 A Voltage rating AC 250 V Contact resistance 120 m max. (DC 6 V, 0.1 A) Insulation resistance 1000 M min. (DC 500 V) Dielectric strength AC 500 V for 1 minute Insertion force 3.5 kg max. (10 pins), 21 kg max. (60 pins) Withdrawal force 0.25 kg min. (10 pins), 2.5 kg min. (60 pins) Applicable wire Flat cable: 1.27 mm (0.050 in.) pitch AWG #28 (stranded wires) or AWG #30 (solid wire) Applicable wire-wrapping wire AWG #26 to #30 (solid wire) MATERIALS Item Materials Insulating material Polyester (UL94V-0) Conductor Copper alloy Contact Gold Terminal Palladium Plating Applicable PC board (standard) Specifications subject to change 1.6 mm (0.062 in.) for standard terminal, 3.2 mm (0.125 in.) for long tail Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 700 Series IDC HEADER M6 SERIES DIMENSIONS [Main body] B 2.54 (0.100) 6.40 (0.252) 8.8 (0.346) A C D 2-M2.6 Depth 4 (0.157) 2.54 (0.100) 9.1(.358) 6 (.236) 6.3 (.248) 4.1 (0.161) 19.1 (0.752) 29.1 (1.15) [With cable] 1.27 (0.050) E F [Cover (closed end type)] E 1.27 (0.050) Note : The polarity of a header is determined by specifying pins to be removed which is designated by the last two digits of the part number (e.g. FCN-70P010-AU/M6#04). G 4 H [Strain relief] J Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts Without mini latch With mini latch Dimensions: mm (in.) F E D A B C G H J 26.80 (1.06) 18.3 (.720) 10.16 (.400) 11.43 (.450) 13.43 (.528) 13.43 (.528) 18.3 (.720) 20.2 (.795) 23.4 (.921) 15.24 (.600) 16.51 (.650) 18.53 (.729) 18.53 (.729) 23.4 (.921) 25.3 (.996) 25.9 (1.02) 17.78 (.700) 19.05 (.750) 21.03 (.828) 21.03 (.828) 25.9 (1.02) 27.8 (1.09) 10 FCN-707P010-AU/0 FCN-707P010-AU/M6 32.0 (1.25) 14 FCN-707P014-AU/0 FCN-707P014-AU/M6 37.1 (1.46) 16 FCN-707P016-AU/0 FCN-707P016-AU/M6 39.62 (1.56) 31.90 (1.26) 34.42 (1.36) 20 FCN-707P020-AU/0 FCN-707P020-AU/M6 44.7 (1.76) 39.50 (1.56) 31.0 (1.22) 22.86 (.900) 24.13 (.950) 26.13 (1.03) 26.13 (1.03) 31.0 (1.22) 32.9 (1.29) 26 FCN-707P026-AU/0 FCN-707P026-AU/M6 52.32 (2.06) 47.12 (1.86) 38.6 (1.52) 30.48 (1.20) 31.75 (1.25) 33.73 (1.33) 33.73 (1.33) 38.6 (1.52) 40.5 (1.59) 30 FCN-707P030-AU/0 FCN-707P030-AU/M6 57.4 (2.26) 52.20 (2.06) 43.7 (1.72) 35.56 (1.40) 36.83 (1.45) 38.83 (1.53) 38.83 (1.53) 43.7 (1.72) 45.6 (1.79) 34 FCN-707P034-AU/0 FCN-707P034-AU/M6 62.48 (2.46) 57.28 (2.26) 48.8 (1.92) 40.64 (1.60) 41.91 (1.65) 43.93 (1.73) 43.93 (1.73) 48.8 (1.92) 50.7 (2.00) 40 FCN-707P040-AU/0 FCN-707P040-AU/M6 70.1 (2.76) 64.90 (2.56) 56.4 (2.22) 48.26 (1.90) 49.53 (1.95) 51.53 (2.03) 51.53 (2.03) 56.4 (2.22) 58.3 (2.29) 50 FCN-707P050-AU/0 FCN-707P050-AU/M6 82.8 (3.26) 77.60 (3.06) 69.1 (2.72) 60.96 (2.40) 62.23 (2.45) 64.23 (2.53) 64.23 (2.53) 69.1 (2.72) 71.0 (2.79) 60 FCN-707P060-AU/0 FCN-707P060-AU/M6 95.5 (3.76) 90.30 (3.56) 81.8 (3.22) 73.66 (2.90) 74.93 (2.95) 76.93 (3.03) 76.93 (3.03) 81.8 (3.22) 83.7 (3.29) Note: For 'Lite PAGOS' add -HN to part number. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 2 700 Series IDC TOOLS FEATURES * Special IDC tools are used to assemble FCN-700 series connectors and flat cables. * All tools are simple and easy to use, even for firsttime users. * Users who have IDC tools manufactured by us do not have to buy hand presses or cutting cables. They are compatible. Please buy the locator plate designed for your connectors. * The number of pins can be changed easily by setting the connector guide to a specified pin hole. * The cable cutter remains sharp, giving fast, easy cutting with a long life. Notes: * Please ask for an operation instruction manual if needed. * If you have any questions about Fujitsu IDC tools, please contact your local Fujitsu office or your local Fujitsu distributor. Hand press Cable cutter Locator plate CABLE TERMINATION * Flat cable termination diagram There are many ways to connect connectors to flat cables. Choose the best connection method for your application from the figure below. The orientation of a connector is important when you specify polarity to prevent incorrect insertion of 700 series clip types. * Cable length The length of a cable is indicated in units of cm, as shown in the figure below. The minimum length is 3 cm. The specified tolerance of the cable length is 10% for L 10 cm (5 mm min.), 1 cm for 10 cm < L < 100 cm, (L/100 cm + 2 cm) for 100 cm L 1800 cm, and 20 cm for 1800 cm < L. Discrete wire insulation displacement connection is possible, but cable assembly is not simple. Please contact us for details. Type number No. 1 Connector model m Lc re Wi No. 2 No. 3 No. 4 .1 .1 No re Wi No 700 series Wire No.1 Wire No.1 Wire No.1 Wire No.1 m Lc Wire No.1 Wire No.1 707P series Wire No.1 Wire No.1 PART NUMBERS FOR IDC TOOLS Name Part number Cable cutter (common) FCN-707T-T001/H Hand press (common) FCN-707T-T101/H Locator plate 700 series socket FCN-707T-T022/H Locator plate 700 series plug (for 707P series) FCN-707T-T025/H Locator plate 700 series plug (for 707P series M6 type) FCN-707T-T036/H The hand press and the cable cutter can be used for other IDC connectors. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 3 700 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 4