Form Measurement Surface Roughness/Contour Measuring System Bulletin No. 2073 Dual-purpose measurement and powerful analysis of surface roughness and contour combined with high accuracy, high drive speed and simplified CNC measurement Hybrid measuring instrument for surface roughness and contour measurement Contour Measuring Functions Detector with new arm design New function specified for 4500 Series Expands measurement range while reducing workpiece interference Mitutoyo's newly designed detector arm lowers workpiece interference while expanding the measurement range in the Z1 axis (detector). Continuous top-bottom measurement function Upper and lower surfaces can be measured continuously by using Mitutoyo's double-sided conical stylus. This continuous measurement data can be used to facilitate analysis of features that were difficult to measure before, such as the effective diameter of an internal screw-thread. * When using the SPH-71 one-sided cut stylus * SV-C4100 (Conventional product) * SV-C4500 50 mm 60 mm 10 mm Lower direction measurement (Bottom surface) Top and bottom measurement switched by software 19 mm Detector measurement range expanded by 10 mm One-touch arm attachment Plain-section diameter Effective diameter (Patent pending in Japan) The arm mount uses a magnetic joint for quick and easy arm replacement. The mount also includes a safety mechanism. * SV-C4100 (Conventional product) Upper direction measurement (Top surface) * SV-C4500 Continuous top-bottom measurement allows hassle-free one-step calibration (Patent pending in Japan) Screw fixing The one-step calibration kit supplied with the SV-C4500 Series has been upgraded to enable easy calibration of the double-ended conical stylus featuring a contact on both the top and the bottom. Precise work such as calibrating the Z1-axis gain, symmetry, and stylus radius can now be carried out in a single operation. Removable unit (arm) * Magnetic joint * Calibration kit for SV-C4500 Series Pin gauge Ball Removable unit (detector) Gauge blocks Variable measuring force function The measuring force can be varied in 5 steps by using the software provided (FORMTRACEPAK), eliminating the need to adjust the measuring force by switching weights or through positional Measuring adjustment. The SV-C4500 Series can also force maintain the specified measuring force even when tilted. 1 SV-C4500 SV-C3200 SV-C4500S4 SV-C3200S4 Surface Roughness Measuring Functions Supporting International Standards Reduction of measuring time and operator's fatigue Compliant with JIS '82/'94/'01, ISO, ANSI, DIN, VDA, and other international surface roughness standards. In addition to high speed movement of main unit, reduction of setting time and operator's fatigue can be achieved by using Auto-leveling Table (option), which allows automatic leveling for a measuring face. We offer a product lineup of surface roughness detectors with different measuring forces Standard detectors can be selected (as listed below) to conform to the international standard required. 0.75mN (tip angle 60; tip radius 2m) 4mN (tip angle 90; tip radius 5m) Common specifications Fast traverse improves measurement efficiency Remote-control unit enables safe, easy & fast measurement X axis (drive unit) : 80mm/s (MAX) Z2 axis (column) : 30mm/s (MAX) The remote-control unit lets you move quickly from positioning to measurement. The unit also features an emergency stop switch and speed control knob for added safety while the machine is moving at high speeds. The total measurement time can be shortened by speeding up the traverse movements. Z2 axis (column) X axis (drive unit) Emergency stop switch Drive speed control knob New Remote Control Box Auto stop feature assures safety even during high-speed movement Incorporation of an ABS scale in the Z2 axis eliminates the need for wearisome origin point re-setting conventionally required for every step of repeated measurements over stepped or multiple sections. The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during highspeed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine. Direction of collision that may cause the safety device to be triggered * Detector for contour measuring All detector and drive unit cables are housed inside the main unit to eliminate any risk of abrasion and guarantee trouble free, high-speed operation. Removable unit * Detector for surface roughness measuring 2 Contour Analysis Software: FORMTRACEPAK Contour Measuring Surface Roughness Measuring * Contour analysis function Upper and lower surfaces can be measured continuously by using Mitutoyo's double-sided conical stylus. This continuous measurement data can be used to facilitate analysis of features that were difficult to measure before, such as the effective diameter of an internal screw-thread. * Surface Roughness analysis function FORMTRACEPAK can perform surface roughness analyses that conform to various standards such as ISO, JIS ANSI, and VDA. For comparing the measurement values with the tolerance limits, you can use the 16% rule or the maximum value rule. Furthermore, since FORMTRACEPAK comes with parameter calculation functions as well as a rich set of graphic analysis functions, it can be widely utilized for everything from routine quality control to R&D applications. It also includes many other functions, such as the function for eliminating (compensating) shapes, such as slopes and R-surface, and a data deletion function. * Contour-tolerancing function as a standard feature * Microscopic contour analysis function * Design value generation function * Simple input using drawing symbols * Data combination function * Multiple-point measurement function * Simple pitch calculation function * Analysis function using multiple-point measurement * Reference length dialog box * Analysis condition modification with a preview function * R-surface automatic measurement function Note: Please refer to the FORMTRACEPAK catalog (E4386) for more details. 3 Integrated layout You can use simple operations to lay out graphics obtained from measurements as well as measurement results for surface roughness, contour, and roundness on a single page. Furthermore, since the program now allows you to specify a saved file and paste it, you can easily paste results from multiple files. Note: the optional ROUNDPAK roundness/cylindricity analysis program is required. (Ver. 7 or higher) * Element information bar This bar displays the attribute values of the pasted items, allowing you to easily check the contents of the pasted measurement data files. * Element insertion bar Using the mouse to drag and drop the analysis content displayed in the element insertion bar, you can paste it onto the layout. From the contour analysis result, you can also select the analysis result for a circle or line alone and paste it in position. * System layout printing By simply selecting the items to be output, you can automatically lay out the page to be printed. Use this feature when you wish to simplify the printing task. * Saving the result as a web page Since you can save the result in html or mhtml format, which can be displayed using Internet Explorer or Microsoft Word, you can check the result even on a PC in which no layout-editing program is installed. * Report creation function You can freely assemble measurement results/conditions/graphics as well as comments/circles/lines/arrows, and print them out in a measurement result report. Furthermore, since you can paste bitmap files, you can also add a workpiece image or company logo to the layout. You can also save the created layout and use it again later for similar measurements. 4 Optional Accessories for Automatic Measurement Y-axis table: 178-097 Enables efficient, automatic measurement of multiple aligned workpieces and multiple points on a single measurement surface. Travel range Resolution Positioning accuracy Drive speed Maximum load Mass Rotary Table 200mm 0.05m 3m Max. 80mm/s 50kg 28kg q 1-axis table: 12AAD975* For efficient measurement in the axial/transverse directions. When measuring a cylindrical workpiece, automatic alignment can be performed in combination with the Y-axis table. *q1-axis mounting plate (12AAE630) is required when directly installing on the base of the SV-C3200/4500. Displacement Resolution Maximum load Rotational speed Mass Rotary Table 360 0.004 12kg Max. 10/s 7kg q 2-axis unit: 178-078* You can measure multiple points on a cylindrical workiece and automate front/rear-side measurement. *q2 -axis mounting plate (12AAE718) is required when directly installing on the base of the SV-C3200/4500. Displacement Resolution Maximum load (loading moment) Rotational speed Mass 360 0.0072 4kg (343 N * cm or less) Max. 18/s 5kg Centering chuck (ring operated): 211-032 Micro-chuck: 211-031 This chuck is useful when measuring small workpieces. You can easily clamp them with its knurled ring. This chuck is suitable for clamping extra-small diameter workpieces (o1 mm or less), which cannot be retained with the centering chuck. Clamping range Dimensions Mass Jaws normal OD: o1 - o36mm Jaws normal I D: o16 - o69mm Jaws reversed OD: o25 - o79mm Dimensions o118 x 41mm Mass 1.2kg Clamping range Auto-leveling table: 178-087 This is a stage that performs fully automatic leveling as measurement starts, freeing the user from this troublesome operation. Fully automatic leveling can be done quickly by anyone. In addition, the operation is easy and reliable. Inclination adjustment angle Maximum load Table dimensions Mass 5 2 7kg 130 x 100mm 3.5kg OD: o0.1 - o1.5mm o118 x 48.5mm 0.6kg Options 3-axis Adjustment Table: 178-047 This table helps make the alignment adjustments required when measuring cylindrical surfaces. The corrections for the pitch angle and the swivel angle are determined from a preliminary measurement and the Digimatic micrometers are adjusted accordingly. A flat-surfaced workpiece can also be leveled with this table. Aligned Not aligned Traverse direction End point Traverse direction End point Axial line Axial line Start point Start point Recorded profiles Table and fixture systems Leveling table 178-043-1 (mm), 178-053-1 (inch) Digital Leveling table 178-042-1 (mm), 178-052-1 (inch) V-block 998291 Rotary vise 218-003 Leveling table 178-016 Leveling table (for D.A.T.) 178-048 (mm), Calibration stand*1 Calibration stand*2 Calibration stand*3 178-058 (inch) 12AAM309 12AAM100 12AAG175 Center support 172-142 Center support riser 172-143 * Desk type vibration isolators Manually charged pneumatic type*4 Cross-travel table 218-001 (mm), 218-011 (inch) Precision vise 178-019 Stand for Desktop type External size (WxDxH):640x470x660mm Mass: 25kg Swivel center support 172-197 Cross-travel table 218-041 (mm), 218-051 (inch) Holder with clamp 176-107 V-block with clamp 172-234, 172-378 * Desk type vibration isolators Desk type*4 No.12AAK110 Monitor arm arm*5 Automatically charged pneumatic type*4 No.178-025 *1 *2 *3 *4 *5 *6 Monitor No.12AAK120 table*5 Side No.12AAL019 Desk Example combination: with side table but no monitor arm (tester and PC not included) Side table Example combination: with monitor arm but no side table*6 (tester and PC not included) Required for calibrating upward measurement of SV-C3200 series. Required for calibrating in bulk by mounting straight arm/small-hole stylus arm without using cross-travel table and Y-axis table. Required for calibrating in bulk by mounting straight arm/eccentric arm/small-hole stylus arm without using cross-travel table and Y-axis table. For models with a product code that ends in S4, S8, H4, or H8. Please contact us directly if you require units for models with a product code that ends in W4 or W8 (large base models). Used together with vibration isolator (No.12AAK110). User to provide a printer rack. 6 Desk Detectors / Styli (For Surface Roughness Measuring) Detectors Extension rods 11.5 10 14 14 8 1.3 3.6 * 12AAG202 Extension rod 50mm 14 60 3.1 7 Detector Skidless nosepiece 4 12AAB355 Order No. Measuring force 178-396-2 0.75mN 178-397-2 4mN * 12AAG203 Extension rod 100mm ISO-1997 and JIS-2001 compliant detectors Detectors that comply with previous standards, for general use, etc. * No more than one extension rod can be connected. Styli 3.4 1.6 2.4 15 ( ): Tip radius Detail-A 90 1.6 3X stylus 12AAC741 (2m) *1 12AAB414 (5m) 12AAB426 (10m) ( ): Tip radius ( ): Tip radius *1: Tip angle 60 *2: For downward-facing measurement only. *3 : 1.2 0.6 Ball 0.5 A Detail-A 90 2X stylus 12AAC740 (2m) *1 12AAB413 (5m) 12AAB425 (10m) 2.4 94.4 87.7 0.6 0.3 1.2 Detail-A 0.6 0.4 Color 0.9 coding*3 2.4 1.2 37.7 43.8 For small slotted hole *2 144.7 137.7 A 7.6 5.2 7.6 5.2 A 2.4 Color 0.9 coding*3 8.5 43.8 37.7 45 7 7 1.2 For deep hole (double-length and triple-length) *2 94.7 87.7 ( ): Tip radius A Color coding*3 0.6 A 12AAJ662 (0.5mm) 2.4 Ball 0.5 0.8 2.5 For ultra-small hole *4 12AAC734 (2m) *1 12AAB406 (5m) 12AAB418 (10m) 3.1 8.9 0.3 1.2 Ball 1.6 44.2 37.7 0.4 41 ( ): Tip radius Color coding*3 ( ): Tip radius 2 12AAE884 (1.6mm) 93.8 87.7 ( ): Tip radius 0.3 A For extra-minute hole 0.8 2.4 0.6 1.2 2.5 8.9 A For small hole *2 *4 12AAC733 (2m) *1 12AAB405 (5m) 12AAB417 (10m) 2.4 1.2 44.2 37.7 0.4 90 Detail-A S5/1 3.4 1.6 Color coding*3 For extra-small hole Detail-A 30 0.3 1.2 A 90 Detail-A S5/1 0.6 ( ): Tip radius 12AAE892 (2m) *1 12AAE908 (5m) 87.7 0.6 Detail-A 90 Detail-A S5/1 0.3 For small hole/Double-length for deep hole *2 0.6 94.42 12AAC732 (2m) *1 12AAB404 (5m) 12AAB416 (10m) Detail-A Tip radius 1m 2m 5m Color coding White Black No color 2.4 37.7 0.6 0.6 1.6 44.4 2.4 0.6 2.4 For small hole 0.4 ( ): Tip radius 90 ( ): Tip radius 2.4 1.2 Detail-A 12AAE898 (2m) *1 12AAE914 (5m) 94.7 87.7 0.9 2.4 2.4 7.6 5.2 A Color coding*3 Double-length for deep hole *2 12AAE882 (1m) *1 12AAE924 (1m) 12AAC731 (2m) *1 12AAB403 (5m) 12AAB415 (10m) 12AAE883 (250m) *4 2.4 44.7 37.7 0.9 3 1.8 0.6 Standard stylus A 12AAE938 (2m) *1 12AAE940 (5m) ( ): Tip radius 10m 250m Yellow No notch or color *4 : Used for calibration, a standard step gauge (No.178-611 (mm), No.178-612 (inch), option) is also required 7 Styli For deep groove (10mm) 0.9 95.2 ( ): Tip radius 1.2 90 45.2 For deep groove *2 37.7 2 (40mm) 20mm 44.7 37.7 12AAC736 (2m) *1 12AAB408 (5m) 12AAB420 (10m) 24.2 23 2.4 10mm A Color coding*3 1.2 1.2 43.830mm 3 12AAB338 (1.588) 3 12AAC738 (2m) *1 12AAB411 (5m) 12AAB423 (10m) ( ): Tip radius 2 35 44.3 2 37.7 0.5 ( ): Tip radius 1 Detail-A *3 : 45.2 37.7 .4 0.9 A 7.6 2.4 *1: Tip angle 60 *2: For downward-facing measurement only. Customized special interchageable styli are available on request, Please contact any Mitutoyo office for more information. 10 2.4 For bottom surface 12AAC739 (2m) *1 12AAB412 (5m) 12AAB424 (10m) 7.4 6.2 1.2 90 1.6 2.4 37.7 2.4 2.4 7.6 45.2 1.4 A 0.8 5.8 5 For eccentric arm *2 ( ): Tip radius 45 1.2 2 ( ): Tip radius 12AAE897 (2m) *1 12AAE913 (5m) *2 Tip radius 2m Color coding Black 12AAE899 (2m) *1 12AAE915 (5m) ( ): Tip radius 2.4 93.8 87.7 5 0.9 7.6 A 44.7 37.7 90 Color coding*3 2.4 7.6 6.4 5.2 1.2 12AAE886 (250m) For corner hole/Double-length for deep hole *2 Detail-A 10 94.7 87.7 0.9 ( ): Tip radius For knife-edge *4 Color coding*3 ( ): Tip radius For rolling circle waviness/Double-length for deep hole *2 *4 44.7 37.7 Ball 1.588 12AAE896 (2m) *1 12AAE912 (5m) *1 1.2 2.4 7.6 5.2 1.2 5.2 36.5 35 7 2.4 ( ): Tip radius For rolling circle waviness surface *4 0.9 93.8 87.7 30mm 2 6.7 6.4 7.6 60 A 60 1.2 For gear tooth/Double-length for deep hole *2 12AAB339 (2m) *1 12AAB410 (5m) 12AAB422 (10m)20mm 60 37.7 40mm 1.2 1.2 90 A 36.5 35 24.2 23 For gear tooth Detail-A 37.7 44.7 A 12AAE894 (2m) *1 12AAE910 (5m) ( ): Tip radius 2.4 2.4 33 31.8 5.2 A 90 93.8 87.7 12AAC737 (2m) *1 12AAB407 (5m) 12AAB419 (10m) ( ): Tip radius0.9 37.7 45.2 1.2 Color coding*3 ( ): Tip radius For deep groove (30mm)/Double-length for deep hole *2 (30mm) 2.4 Color coding*3 12AAE895 (2m) *1 12AAE911 (5m) 2.4 90 groove *2 Detail-A ( ): Tip radius 43.8 42.6 5.2 For deep groove * (20mm) 2.4 2 For deep 2.4 5.2 23 21.8 2.4 1.2 Detail-A Detail-A 12AAE893 (2m) *1 12AAE909 (5m) 87.7 ( ): Tip radius 14.2 13 Color coding*3 For deep groove *2 (20mm) 12AAC735 (2m) *1 12AAB409 (5m) 12AAB421 (10m) 44.7 37.7 A 5m No color 10m Yellow *4 : U sed for calibration, a standard step gauge (No.178-611 (mm), No.178-612 (mm), option) is also required 8 Arms / Styli (For Contour Measuring) Arms Description Arm No. Parts No. Straight arm AB-31*1 12AAM101 Eccentric arm AB-32 12AAM102 Small-hole arm AB-33 12AAM103 * Eccentric arm AB-32 * Straight arm AB-31 Applicable stylus No. SPH-5*, 6*, 7*, 8*, 9*, SPHW*2-56,66,76 SPH-5*, 6*, 7*, 8*, 9*, SPHW*2-56,66,76 SPH-41, 42, 43 o8 20 57.5 o8 20 57.5 o8 218*3 218*3 *1 Standard accessory *2 Stylus for SV-C4500 series *3 One-sided cut stylus SPH-71 (standard accessory) mounting * Small-hole arm AB-33 57.5 20 218 40 Styli Stylus name Double-sided conical stylus *1 One-sided cut stylus Intersecting cut stylus Cone stylus Tip angle 30 Sapphire tipped Cone stylus Tip angle 30 Carbide-tipped Cone stylus Tip angle 20 Carbide-tipped Cone stylus Tip angle 50 Diamond tipped Knife edge stylus Ball stylus Small hole stylus*4 Stylus No. SPHW-56 SPHW-66 SPHW-76 SPH-51 SPH-61 SPH-71 SPH-81 SPH-91 SPH-52 SPH-62 SPH-72 SPH-82 SPH-92 SPH-53 SPH-63 SPH-73 SPH-83 SPH-93 SPH-56 SPH-66 SPH-76 SPH-86 SPH-96 SPH-57 SPH-67 SPH-77 SPH-87 SPH-97 Parts No. 12AAM095*2 12AAM096 12AAM097 354882 354883 354884 *2*3 354885 354886 354887 354888 354889 354890 354891 354892 354893 354894 354895 354896 12AAA566 12AAA567 12AAA568 12AAA569 12AAA570 12AAE865 12AAE866 12AAE867 12AAE868 12AAE869 Application arm No. H (mm) AB-31, AB-32 20 AB-31, AB-32 32 AB-31, AB-32 48 AB-31, AB-32 6 AB-31, AB-32 12 AB-31, AB-32 20 AB-31, AB-32 30 AB-31, AB-32 42 AB-31, AB-32 6 AB-31, AB-32 12 AB-31, AB-32 20 AB-31, AB-32 30 AB-31, AB-32 42 AB-31, AB-32 6 AB-31, AB-32 12 AB-31, AB-32 20 AB-31, AB-32 30 AB-31, AB-32 42 AB-31, AB-32 6 AB-31, AB-32 12 AB-31, AB-32 20 AB-31, AB-32 30 AB-31, AB-32 42 AB-31, AB-32 6 AB-31, AB-32 12 AB-31, AB-32 20 AB-31, AB-32 30 AB-31, AB-32 42 SPH-79 355129 AB-31, AB-32 20 SPH-54 SPH-64 SPH-74 SPH-84 SPH-94 SPH-55 SPH-65 SPH-75 SPH-85 SPH-95 SPH-41 SPH-42 SPH-43 354897 354898 354899 354900 354901 354902 354903 354904 354905 354906 12AAM104 12AAM105 12AAM106 AB-31, AB-31, AB-31, AB-31, AB-31, AB-31, AB-31, AB-31, AB-31, AB-31, AB-33 AB-33 AB-33 6 12 20 30 42 6 12 20 30 42 2 4 6.5 AB-32 AB-32 AB-32 AB-32 AB-32 AB-32 AB-32 AB-32 AB-32 AB-32 o3 o3 o4.8 H Tip angle: 30 Tip radius: 25m Carbide-tipped One-sided cut stylus Tip shape: One-sided cut Tip angle: 20 Tip radius: 25m Carbide-tipped H Cone stylus Small hole stylus SPH-42 0.4 o3 o5 H H o3 55 Tip angle: 12 Tip radius: 25m Carbide-tipped Tip angle: 20 Tip radius: 25m Carbide-tipped H o3 o3 Tip shape: One-sided cut Tip angle: 20 Tip radius: 25m Carbide-tipped 1 Small hole stylus SPH-43 Knife edge stylus Intersecting cut stylus o4 H H Tip angle: 20 Edge width: 3mm Tip radius: 25m Carbide-tipped Tip angle: 20 Tip radius: 25m Carbide-tipped 55 Tip shape:One-sided cut Tip angle: 20 Tip radius: 25m Carbide-tipped H 2.5 Ball stylus o3 H Arm stylus (comprising an arm and stylus) Double-sided small hole arm stylus 55 Tip angle: 30 (SPH-79: 50) Tip radius: 25m Sapphire, Carbide-tipped (SPH-79:Diamond tipped) o3 Stylus for SV-C4500 series *2 Standard accessory of SV-C4500 series *3 Standard accessory of SV-C3200 series *4 Styli SPH-21, 22, and 23 for SV-C3100/4100 series are not available. Stylus No. SPHW-31 SPHW-32 SPHW-33 o1.6 H *1 Arm stylus name Small hole stylus SPH-41 Double-sided conical stylus Cone stylus Parts No. 12AAM108 12AAM109 12AAM110 Ball dia: 1mm Carbide-tipped H (mm) 2.4 5 9 *5 Arm Stylus for SV-C4500 series Double-sided small hole arm stylus SPHW-31 20 o8 o1.6 H closeup of tip o4 Double-sided small hole arm stylus SPHW-32 Double-sided small hole arm stylus SPHW-33 20 o8 20 o8 275 Tip shape:Cone Tip angle: 30 tip radius: 25m Carbide-tipped o3 275 o5 Tip shape:Cone Tip angle: 30 tip radius: 25m Carbide-tipped H closeup of tip 9 o4 H closeup of tip 275 Tip shape:Cone Tip angle: 30 tip radius: 25m Carbide-tipped Dimensions X-axis (drive unit) measuring range : 100mm TYPE (S4/H4/W4) Unit: mm W1 386 H1 H2 108 T-groove H3 85 12 175 240 156 W2 T-groove size (Common for all models) 130 32 450 125 X-axis (drive unit) measuring range : 200mm TYPE (S8/H8/W8) W1 486 H1 H2 158 T-groove H3 85 175 12 156 240 X-axis (drive unit) Measuring range 100mm 200mm 166 W2 Models 3200 Series 4500 Series H1 (mm) 130 32 450 125 H2 (mm) H3 (mm) W1 (mm) W2 (mm) 600 SV-C3200S4 SV-C4500S4 966 854 100 438 SV-C3200H4 SV-C4500H4 1166 1054 100 438 600 SV-C3200W4 SV-C4500W4 1176 1054 110 838 1000 SV-C3200S8 SV-C4500S8 966 854 100 438 600 SV-C3200H8 SV-C4500H8 1166 1054 100 438 600 SV-C3200W8 SV-C4500W8 1176 1054 110 838 1000 10 Specifications SV-C3200S4 (525-491A-1) SV-C4500S4 (525-451A-1) Model No. (Order No.) SV-C3200H4 (525-492A-1) SV-C4500H4 (525-452A-1) SV-C3200W4 (525-493A-1) SV-C4500W4 (525-453A-1) SV-C3200S8 (525-496A-1) SV-C4500S8 (525-456A-1) SV-C3200H8 (525-497A-1) SV-C4500H8 (525-457A-1) SV-C3200W4 (525-498A-1) SV-C4500W8 (525-458A-1) Specifications for Surface Roughness Measurement Measuring range X axis (drive unit) 100mm 200mm Z1 axis (detector unit) 800m / 80m / 8m Straightness (0.05+0.001L) m L = Drive length (mm) Resolution Z1 axis (detector unit) 0.5m / 200mm 0.01m (800m) , 0.001m (80m) , 0.0001m (8m) Measuring force 0.75mN or 4mN Stylus tip 60, 2mR (Measuring force: 0.75mN) or 90, 5mR (Measuring force: 4mN) Conformable standards Parameters Assessed profiles Graphs Data compensation Filters JIS1982/JIS1994/JIS2001/ISO1997/ANSI/VDA Pa, Pq, Psk, Pku, Pp, Pv, Pz, Pt, Pc, PSm, Pq, Pm (rC), Pmr, Pc, Ra, Rq, Rsk, Rku, Rp, Rv, Rz, Rt, Rc, RSm, Rq, Rm (rC), Rmr, Rc, Wa, Wq, Wsk, Wku, Wp, Wv, Wz, Wt, Wc, WSm, Wq, Wm (rC), Wmr, Wc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Rx, AR, R, Wx, AW, W, Wte, Ry, RyDIN, RzDIN, R3y, R3z, S, HSC, Lo, Ir, a, a, q, Vo, Htp, NR, NCRX, CPM, SR, SAR, NW, SW, SAW Primary Profile, Roughness profile, Envelope residual curve, Filtered waviness curve, Band pass waviness curve, Waviness curve, Rolling circle waviness curve, Roughness motif, Waviness motif, DIN4776 curve Amplitude distribution graphs, BAC1, BAC2, Power spectrum curve, Auto correlation curve Inclination angle distribution curve, Peak point height distribution curve, Parameter distribution curve Tilt compensation, R-surface compensation, Ellipse Compensation, Parabola compensation, Hyperbolic compensation, Polynomial compensation, Conic automatic compensation, Polynomial automatic compensation Gaussian filter, 2CRPC75, 2CRPC50, 2CR75, 2CR50, Robust spline filter Specifications for Contour Measurement Measuring range X axis (drive unit) 100mm 200mm Z1 axis (detector unit) 60mm (30mm in horizontal situation) Straightness (when the X axis is horizontal) X axis (drive unit) Accuracy Z1 axis (detector unit) 0.8m / 100mm X axis (drive unit) Resolution Z1 axis (detector unit) SV-C3200 series: 0.04m, SV-C4500 series: 0.02m Z2 axis (column) 1m Measuring force Measuring face direction 2m / 200mm (0.8+0.01L) m L = Drive length (mm) (0.8+0.02L) m L = Drive length (mm) SV-C3200 series: (1.6+|2H |/100) m, SV-C4500 series: (0.8+|2H |/100) m H = Measurement height from the horizontal position (mm) 0.05m SV-C3200 series: 30mN, SV-C4500 series:10, 20, 30, 40, 50mN (Setting measuring force FORMTRACEPAK) SV-C3200 series: Both upward and downward, SV-C4500 series: Both upward and downward (direction switch from FORMTRACEPAK) Common Specifications Z2-axis (column) travel range 300mm X-axis inclination angle Drive speed 500mm 300mm X axis 0~80mm/s and manual operation Z2 axis (column) 0~30mm/s and manual operation Measuring speed 500mm 45 0.02~5mm/s Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. One Number to Serve You Better 1-888-MITUTOYO (1-888-648-8869) Aurora, Illinois Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may require prior approval by an appropriate governing authority. (Corporate Headquarters) Westford, Massachusetts Huntersville, North Carolina Trademarks and Registrations Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies should be contacted for more complete trademark and registration information. Mason, Ohio Plymouth, Michigan City of Industry, California Birmingham, Alabama (c) 2012 Mitutoyo America Corporation, Aurora IL 2.5M 0512-03 Printed in USA, June 2012 Precision is our Profession