Freescale CodeWarrior Development Tools CodeWarrior TAP Combining USB and Ethernet into one TAP Overview Features CodeWarrior TAP enables Freescale target * Allows either USB or Ethernet (10/100) * In conjunction with the CodeWarrior development system, CodeWarrior TAP: system debugging via a standard debug host connection for the developer Programs system flash memory during port (usually JTAG) while connected to a workstation debug and development phases of developer's workstation via Ethernet or USB. CodeWarrior TAP may also be referred to by industry-standard terms such as probe, JTAG probe, JTAG emulator or target probe. * USB powered, even when using Ethernet the project, including most popular * Low-cost removable probe tips sold flash memories used with Freescale separately flash memories, but specifically all development systems Using CodeWarrior TAP's Ethernet * Supports debugging via JTAG interface Controls the target development system connection, developers can debug systems * Automatically supports system voltage even when the system may have remotely or more effectively share a single system with multiple developers. When a shared system is not needed, CodeWarrior TAP connects directly to the developer's workstation with a single USB cable. Power is supplied by the USB port so that no additional cables are needed. CodeWarrior TAP is designed to work in conjunction with CodeWarrior development tools and Freescale processors. It is a critical debug tool in all phases of the project and is necessary for debugging systems prior to running a fully debugged operating system. levels from 1.2 to 3.3 * Supports all available core speeds crashed during development Offers complete system visibility and and voltages for supported Freescale control, including reading/writing of CPU processors registers, memory mapped registers, * As a convenience feature, CodeWarrior TAP can connect to a target system's serial port allowing telnet access to a remotely located system and control of the u-boot program block reading/writing of memories, single step debugging, setting software and hardware breakpoints, and monitoring target system status Gives control over the target system execution, including control of one or all cores and resets Contact Freescale for information regarding: * Integrating this probe into your software * Utilizing this probe as your target debug probe System Requirements Kit Contents Order Information * 10/100 Ethernet or USB on host computer * CodeWarrior TAP probe CodeWarrior TAP and associated tips can * Probe tip that matches the debug target * CodeWarrior TAP probe USB Supported Devices * QorIQ communications processors * StarCore DSPs * PowerQUICC communications processors power supply * CodeWarrior TAP USB cable * CodeWarrior TAP RJ25/DB9 adapter * CodeWarrior TAP serial cable * Tip not included (must be ordered separately) * Ethernet cable not included be ordered at freescale.com or from an authorized Freescale distributor. Part number for the base (this device): * CWH-CTP-BASE-HE Part numbers for related tips: * CWH-CTP-COP-YE: Connects to QorIQ and PowerQUICC II, II Pro and III Power Architecture(R) processors * CWH-CTP-STC-YE: Connects to StarCore DSP processors Support Policy * Includes 12-month technical support For the latest information on CodeWarrior TAP, including updates and additional devices, visit freescale.com/CWTAP Freescale, the Freescale logo, CodeWarrior, PowerQUICC, QorIQ and StarCore are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. (c) 2012, 2013 Freescale Semiconductor, Inc. Document Number: CODEWARTAPFS REV 1