1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Feed through Type
2012.9.6
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (LC Combined) Feed through Type
NFE61P Series (2606 Size)
c Dimensions
2.6±0.3
6.8±0.5
0.7±0.20.7±0.2
1.6±0.3
1.6±0.3
(1) (2) (3)
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
0
10
20
30
40
50
60
0.1 1 10 100 20001000
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
NFE61PT181B1H9
c Equivalent Circuit
Input (Output) Output (Input)
GND
No polarity.
(1) (3)
(2)
c Packaging
Code Packaging Minimum Quantity
L180mm Embossed Tape 2500
K330mm Embossed Tape 8000
BBulk(Bag) 500
c Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating
Temperature Range
NFE61PT330B1H9p33pF ±30% 2A 50Vdc 1000M ohm -40 to +85°C
NFE61PT680B1H9p68pF ±30% 2A 50Vdc 1000M ohm -40 to +85°C
NFE61PT101Z1H9p100pF ±30% 2A 50Vdc 1000M ohm -40 to +85°C
NFE61PT181B1H9p180pF ±30% 2A 50Vdc 1000M ohm -40 to +85°C
NFE61PT361B1H9p360pF ±20% 2A 50Vdc 1000M ohm -40 to +85°C
NFE61PT681B1H9p680pF ±30% 2A 50Vdc 1000M ohm -40 to +85°C
NFE61PT102E1H9p1000pF 80/-20% 2A 50Vdc 1000M ohm -40 to +85°C
NFE61PT472C1H9p4700pF 80/-20% 2A 50Vdc 1000M ohm -40 to +85°C
Number of Circuit: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Feed through Type
2012.9.6
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
