Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Feed through Type Data Sheet 1 EMIFILr (LC Combined) Feed through Type NFE61P Series (2606 Size) c Dimensions c Insertion Loss Characteristics (Main Items) (50 - 50) 0 NFE61PT330B1H9 NFE61PT680B1H9 10 (2) (3) 1.60.3 (1) NFE61PT101Z1H9 0.70.2 2.60.3 Insertion Loss (dB) 0.70.2 6.80.5 1.60.3 20 NFE61PT181B1H9 NFE61PT361B1H9 30 NFE61PT681B1H9 NFE61PT102E1H9 40 NFE61PT472C1H9 50 60 0.1 : Electrode 1 (in mm) c Equivalent Circuit 10 Frequency (MHz) 100 1000 2000 c Packaging Input (Output) (1) Code Packaging Minimum Quantity L 180mm Embossed Tape 2500 K 330mm Embossed Tape 8000 B Bulk(Bag) 500 Output (Input) (3) GND (2) No polarity. c Rated Value (p: packaging code) Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFE61PT330B1H9p 33pF 30% 2A 50Vdc 1000M ohm -40 to +85C NFE61PT680B1H9p 68pF 30% 2A 50Vdc 1000M ohm -40 to +85C NFE61PT101Z1H9p 100pF 30% 2A 50Vdc 1000M ohm -40 to +85C NFE61PT181B1H9p 180pF 30% 2A 50Vdc 1000M ohm -40 to +85C Part Number NFE61PT361B1H9p 360pF 20% 2A 50Vdc 1000M ohm -40 to +85C NFE61PT681B1H9p 680pF 30% 2A 50Vdc 1000M ohm -40 to +85C NFE61PT102E1H9p 1000pF 80/-20% 2A 50Vdc 1000M ohm -40 to +85C NFE61PT472C1H9p 4700pF 80/-20% 2A 50Vdc 1000M ohm -40 to +85C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Feed through Type Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/