MPS3563 - ON Semiconductor - Product.Network

January, 2006 − Rev. 3 1Publication Order Number:

MPS918/D

MPS918, MPS3563

MPS918 is a Preferred Device

Amplifier Transistors

NPN Silicon

Features

•Pb−Free Packages are Available*

MAXIMUM RATINGS

Rating Symbol Value Unit

Collector−Emitter Voltage MPS918

MPS3563

VCEO 15

Vdc

Collector−Base Voltage MPS918

MPS3563

VCBO 30

Vdc

Emitter−Base Voltage MPS918

MPS3563

VEBO 3.0

2.0

Vdc

Collector Current − Continuous IC50 mAdc

Total Device Dissipation @ TA = 25°C

Derate above 25°CPD350

2.8 mW

mW/°C

Total Device Dissipation @ TC = 25°C

Derate above 25°CPD0.85

6.8 W

mW/°C

Operating and Storage Junction

Temperature Range TJ, Tstg −55 to +150 °C

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Thermal Resistance, Junc tion−to−A m bient

(Note 1) RqJA 357 °C/W

Thermal Resistance, Junction−to−Case RqJC 147 °C/W

Maximum ratings are those values beyond which device damage can occur.

Maximum ratings applied to the device are individual stress limit values (not

normal operating conditions) and are not valid simultaneously. If these limits are

exceeded, device functional operation is not implied, damage may occur and

reliability may be affected.

1. RqJA is measured with the device soldered into a typical printed circuit board.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

MPS3563RLRA TO−92 2000/Tape & Ree

MPS3563RLRAG TO−92

(Pb−Free) 2000/Tape & Ree

MPS3563 TO−92 5000 Units/Box

MPS3563G TO−92

(Pb−Free) 5000 Units/Box

Preferred devices are recommended choices for future use

and best overall value.

http://onsemi.com

COLLECTOR

BASE

EMITTER

Device Package Shipping†

ORDERING INFORMATION

MPS918 TO−92 5000 Units/Box

MPS918G TO−92

(Pb−Free) 5000 Units/Box

† For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specificatio

Brochure, BRD8011/D.

MPSxxxx = Device Code

xxxx = 918 or 3563

A = Assembly Location

Y = Year

WW = Work Week

G= Pb−Free Package

(Note: Microdot may be in either location)

TO−92

CASE 29−11

STYLE 1

123

MARKING

DIAGRAM

MPS

xxxx

AYWW G

MPS918, MPS3563

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

Characteristic Symbol Min Max Unit

OFF CHARACTERISTICS

Collector−Emitter Breakdown Voltage (Note 2)

(IC = 3.0 mAdc, IB = 0) MPS918

MPS3563

V(BR)CEO 15

12 −

−

Vdc

Collector−Base Breakdown Voltage

(IC = 1.0 mAdc, IE = 0) MPS918

(IC = 100 mAdc, IE = 0) MPS3563

V(BR)CBO 30

30 −

−

Vdc

Emitter−Base Breakdown Voltage

(IE = 10 mAdc, IC = 0) MPS918

MPS3563

V(BR)EBO 3.0

2.0 −

−

Vdc

Collector Cutoff Current

(VCB = 15 Vdc, IE = 0) MPS918

MPS3563

ICBO −

−10

nAdc

ON CHARACTERISTICS

DC Current Gain (Note 2)

(IC = 3.0 mAdc, VCE = 1.0 Vdc) MPS918

(IC = 8.0 mAdc, VCE = 10 Vdc) MPS3563

hFE 20

20 −

200

−

Collector−Emitter Saturation Voltage

(IC = 10 mAdc, IB = 1.0 mAdc) MPS918 VCE(sat) − 0.4 Vdc

Base−Emitter Saturation Voltage

(IC = 10 mAdc, IB = 1.0 mAdc) MPS918 VBE(sat) − 1.0 Vdc

SMALL−SIGNAL CHARACTERISTICS

Current−Gain − Bandwidth Product (Note 2)

(IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS918

(IC = 8.0 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS3563

fT600

600 −

1500

MHz

Output Capacitance

(VCB = 0 Vdc, IE = 0, f = 1.0 MHz) MPS918

(VCB = 10 Vdc, IE = 0, f = 1.0 MHz) MPS918

(VCB = 10 Vdc, IE = 0, f = 1.0 MHz) MPS3563

Cobo −

−

3.0

1.7

Input Capacitance

(VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) MPS918 Cibo − 2.0 pF

Small−Signal Current Gain

(IC = 8.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MPS3563 hfe 20 250 −

Noise Figure

(IC = 1.0 mAdc, VCE = 6.0 Vdc, RS = 400 kW, f = 60 MHz) MPS918 NF − 6.0 dB

FUNCTIONAL TEST

Common−Emitter Amplifier Power Gain

(IC = 6.0 mAdc, VCB = 12 Vdc, f = 200 MHz) MPS918

(IC = 8.0 mAdc, VCE = 10 Vdc, f = 200 MHz) MPS3563

(Gfd + Gre t −20 dB)

Gpe 15

14 −

−

Power Output

(IC = 8.0 mAdc, VCB = 15 Vdc, f = 500 MHz) MPS918 Pout 30 − mW

Oscillator Collector Efficiency

(IC = 8.0 mAdc, VCB = 15 Vdc, Pout = 30 mW, f = 500 MHz) MPS918 η25 − %

2. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 1.0%.

MPS918, MPS3563

http://onsemi.com

PACKAGE DIMENSIONS

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. CONTOUR OF PACKAGE BEYOND DIMENSION R

IS UNCONTROLLED.

4. LEAD DIMENSION IS UNCONTROLLED IN P AND

BEYOND DIMENSION K MINIMUM.

SECTION X−X

SEATING

PLANE DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.175 0.205 4.45 5.20

B0.170 0.210 4.32 5.33

C0.125 0.165 3.18 4.19

D0.016 0.021 0.407 0.533

G0.045 0.055 1.15 1.39

H0.095 0.105 2.42 2.66

J0.015 0.020 0.39 0.50

K0.500 −−− 12.70 −−−

L0.250 −−− 6.35 −−−

N0.080 0.105 2.04 2.66

P−−− 0.100 −−− 2.54

R0.115 −−− 2.93 −−−

V0.135 −−− 3.43 −−−

TO−92 (TO−226)

CASE 29−11

ISSUE AL

STYLE 1:

PIN 1. EMITTER

2. BASE

3. COLLECTOR

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its of ficers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

MPS918/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.