G3RDX02SNUSDC12 - OMRON - Product.Network

CSM_G3NE_DS_E_3_3

Solid State Relays

G3NE

Compact, Low-cost, SSR Switching 5 to 20 A

• Wide load voltage range: 75 to 264 VAC. Both 100-V and

200-V loads can be handled with the same model.

• Dedicated, compact aluminum PCB and power elements used.

• Built-in varistor effectively absorbs external surges.

• Quick-connect #110 input terminals and #250 output

connections. (#187 input terminals and #250 output

connections are available.)

• “-US” models certified by UL, CSA, and IEC/EN (TÜV).

Refer to Safety Precautions for All Solid State

Relays.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Model Number Structure

■Model Number Legend

1. Basic Model Name

G3NE: Solid State Relay

2. Rated Load Power Supply Voltage

2: 200 VAC

3. Rated Load Current

05: 5 A

10: 10 A

20: 20 A

4. Terminal Type

T: Quick-connect terminals

5. Zero Cross Function

Blank: Equipped with zero cross function

L: Not equipped with zero cross function

6. Special Specifications

Blank: Standard models

2: #187 input terminals

7. Certification

US: Certified by UL, CSA, and TÜV

1234 567

G3NE-@@@@-@-@

G3NE

Ordering Information

■List of Models

Note: 1. The rated input voltage depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering

Data on page 4.

2. When ordering, specify the input voltage.

3. Refer to List of Certified Models for a list of products that comply with safety standards. When ordering a UL, CSA, and EN(TÜV) certified

model, add “-US” to the model number.

■Accessories (Order Separately)

Heat Sinks

The following heat sinks are thin and can be DIN-track mounted.

See Dimensions for details.

Isolation Zero cross

function

Indicator Rated output load Rated input voltage

(See note 1, 2.)

Model

Phototriac Yes No 5 A at 100 to 240 VAC 5VDC G3NE-205T-US DC5

G3NE-205T-2-US DC5

12VDC G3NE-205T-US DC12

G3NE-205T-2-US DC12

24VDC G3NE-205T-US DC24

G3NE-205T-2-US DC24

10 A at 100 to 240 VAC 5VDC G3NE-210T-US DC5

G3NE-210T-2-US DC5

12VDC G3NE-210T-US DC12

G3NE-210T-2-US DC12

24VDC G3NE-210T-US DC24

G3NE-210T-2-US DC24

20 A at 100 to 240 VAC 5VDC G3NE-220T-US DC5

G3NE-220T-2-US DC5

12VDC G3NE-220T-US DC12

G3NE-220T-2-US DC12

24VDC G3NE-220T-US DC24

G3NE-220T-2-US DC24

No 5 A at 100 to 240 VAC 5VDC G3NE-205TL-US DC5

G3NE-205TL-2-US DC5

12VDC G3NE-205TL-US DC12

G3NE-205TL-2-US DC12

24VDC G3NE-205TL-US DC24

G3NE-205TL-2-US DC24

10 A at 100 to 240 VAC 5VDC G3NE-210TL-US DC5

G3NE-210TL-2-US DC5

12VDC G3NE-210TL-US DC12

G3NE-210TL-2-US DC12

24VDC G3NE-210TL-US DC24

G3NE-210TL-2-US DC24

20 A at 100 to 240 VAC 5VDC G3NE-220TL-US DC5

G3NE-220TL-2-US DC5

12VDC G3NE-220TL-US DC12

G3NE-220TL-2-US DC12

24VDC G3NE-220TL-US DC24

G3NE-220TL-2-US DC24

Model Applicable SSR

Y92B-N50 G3NE-205T(L)(-2)-US/-210T(L)(-2)-US

Y92B-N100 G3NE-220T(L)(-2)-US

G3NE

Specifications

■Ratings (at an Ambient Temperature of 25°C)

Input

Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions.

Output

Note: 1. The load current varies depending on the ambient temperature. Refer to Load Current vs. Ambient Temperature under Engineering Data

for details on page 4.

2. These values apply when using a dedicated heat sink or a radiation plate of specified size.

■Characteristics

Rated voltage Operating voltage Voltage level Input impedance

Must operate Must release With zero cross function Without zero cross function

5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 250 Ω±20% 300 Ω±20%

12 VDC 9.6 to 14.4 VDC 9.6 VDC max. 600 Ω±20% 800 Ω±20%

24 VDC 19.2 to 28.8 VDC 19.2 VDC max. 1.6 kΩ±20%

Model Applicable load

Rated load voltage Load voltage range Load current

(See note 1.)

Inrush current

With heat sink Without heat sink

G3NE-205T(L)(-2)-US 100 to 240 VAC 75 to 264 VAC 0.1 to 5 A at 40°C 0.1 to 5 A at 40°C 60 A (60 Hz, 1 cycle)

G3NE-210T(L)(-2)-US 0.1 to 10 A at 40°C

(See note 2.) 0.1 to 5 A at 40°C 150 A (60 Hz, 1 cycle)

G3NE-220T(L)(-2)-US 0.1 to 20 A at 40°C

(See note 2.) 0.1 to 5 A at 40°C 220 A (60 Hz, 1 cycle)

Item G3NE-2@@T(-2)-US G3NE-2@@TL(-2)-US

Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max.

Release time 1/2 of load power source cycle + 1 ms max.

Output ON voltage drop 1.6 V (RMS) max.

Leakage current 2 mA max. (at 100 VAC)

5 mA max. (at 200 VAC)

Insulation resistance 100 MΩ min. (at 500 VDC)

Dielectric strength 2,000 VAC, 50/60 Hz for 1 min

Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude

Shock resistance Destruction: 1,000 m/s2

Ambient temperature Operating: –30°C to 80°C (with no icing or condensation)

Storage: –30°C to 100°C (with no icing or condensation)

Ambient humidity Operating: 45% to 85%

Certified standards UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535

TÜV R9051064 (VDE0435) (EN60950)

EMC Emission: EN55011 Group 1 Class B

Immunity: EN61000-6-2

Weight Approx. 37 g

G3NE

Engineering Data

Load Current vs. Ambient Temperature

One Cycle Surge Current: Non-repetitive

Note: Keep the inrush current to half the rated value if it occurs repetitively.

G3NE-205T(L)(-2)-US G3NE-210T(L)(-2)-US G3NE-220T(L)(-2)-US

Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)

Load current (A)

Without heat sink

With standard heat sink (Y92B-N50)

or aluminum plate measuring 100 mm

x 100 mm x t2 mm (W x H x D)

With standard heat sink (Y92B-N100) or

aluminum plate measuring 300 mm x

300 mm x t3 mm (W x H x D)

G3NE-205T(L)(-2)-US G3NE-210T(L)(-2)-US G3NE-220T(L)(-2)-US

Inrush current (A. Peak)

Energized time (ms)

Inrush current (A. Peak)

Energized time (ms)

Inrush current (A. Peak)

Energized time (ms)

G3NE

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Safety Precautions

Refer to Safety Precautions for All Solid State Relays.

■Precautions for Correct Use

Please observe the following precautions to prevent failure to

operate, malfunction, or undesirable effect on product performance.

Do not apply excessive force to the terminals. Be careful when

pulling or inserting the terminal clips for the Quick Connector (QC).

When attaching a heat sink to the G3NE, in order to facilitate heat

dissipation, apply heat-conductive grease on the heat sink.

For DIN Track mounting, use a separately sold Heat Sink. Refer to

information on the G3NA.

G3NE-210T(L): Y92B-N50

G3NE-220T(L): Y92B-N100

Tighten the mounting screws of the heat sink with a torque of 0.59 to

0.98 N·m.

■Thermal Resistance Rth (Back

of Junction SSR)

■EMC Directive Compliance

The G3NE complies with EMC Directives under the following

conditions ("-US" models only).

30±0.2

3 +

4 −

14.5

6.5

7.1

2.9 7.95

30+0.5

G3NE-205T(L)/210T(L)/220T(L)(-2)-US

Mounting Holes

Two, 3.5-dia. or M3 holes

Output Load

Input

37.5 max.

3.5 dia. hole

11.5 max.

* G3NE-2@@T(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent)

47.5

max.

Two #110 (t = 0.5) (Faston

tab or equivalent)*

Two #250 (t = 0.8) (Faston

tab or equivalent)

Terminal Arrangement/

Internal Connections

(Top View)

Input

voltage

Load power

supply

5.6

47.6

90±0.3

35 30.5±0.3 30

54.5

35±0.2

90±0.4

35 30.5±0.3

47.6

90±0.3

5.6

5 4.5

28 13

35±0.2

90±0.4

Mounting Holes

Y92B-N100

4.6 dia. hole Two, M3 holes

Two, M4 holes

77 max.

100 max.

44 max. 47 max.

51 max.

4.6 dia. hole Two, M3 holes

77 max.

100 max.

71 max.

100 max.

75 max.

Two, 3.2-dia. holes

Mounting Holes

Weight: approx. 200 g

Weight: approx. 400 g

Heat Sink

Y92B-N50

Two, 3.2-dia.

holes

Two, M4

holes

Two, 4.4-dia.

or M4 holes

Two, 4.4-dia.

or M4 holes

Model Thermal resistance (°C/W)

G3NE-205T (L) 2.72

G3NE-210T (L) 2.12

G3NE-220T (L) 2.22

OutputInput G3NE-US

Load

10 m max.

• Connect a film capacitor to the load power supply.

• The input cable must be less than 10 m.

Film capacitor:

• 1 μF, 250 VAC

G3NE

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Terms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you

have any questions or comments.

Warranties.

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron

disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER

ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the

Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at

Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount

equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,

repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products

were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate

modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall

not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or

electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,

recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above

warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself

is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,

system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product

with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence

thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate

it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our

practice to change part numbers when published ratings or features are changed, or when significant construction changes are

made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers

may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at

any time to confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

2015.9

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/