DS04-28210-4E
FUJITSU SEMICONDUCTOR
DATA SHEET
ASSP for Image Processing
CMOS
A/D Converter
(1-channel, 8-bit, 45MHz)
MB40C558
■DESCRIPTION
The MB40C558 is a high-speed A/D converter using high-speed CMOS process technology.
■FEATURES
• Resolution: 8 bits
•Linearity error: ±0.20% (Typ.)
• Maximum conversion rate: 45 MSPS (Min.)
• Power supply voltage: Analog section +5.0 V
Digital section +3.0 V or +5.0 V
• Digital input voltage range: TTL le vel
• Digital output voltage range: CMOS level compatible
• Analog input voltage range: 0.5 to 3 V (with 2 Vp-p)
• Analog input capacity: 15 pF (Typ.)
• Power consumption: 110 mW (Typical:@fCLK = 45 MHz, AVDD = 5 V, DVDD = 3 V)
135 mW (Typical:@fCLK = 45 MHz, AVDD = 5 V, DVDD = 3 V)
• Additional function: Reference voltage generator circuit: VREFT = 3 V, VREFB = 1 V
• P ackage options: SOP24, SSOP24
■PACKAGES
This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions
be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.
(FPT-24P-M03)(FPT-24P-M01)
24-pin, Plastic SOP 24-pin, Plastic SSOP
2
MB40C558
■PIN ASSIGNMENT
■PIN DESCRIPTION
Values within ( ) are typical values.
■NOTES ON USE
• Be sure to bypass the AVDD, DVDD, VRT and VRB pins to the ground using a high-frequency capacitor.
The high-frequency capacitor should be connected as near the pin as possible.
• Provide four clocks or more immediately after the power up to pre vent current dissipation due to the
indeterminate internal logic.
Pin No. Pin name Functions
1, 2, 16, 18 AVDD Analog power supply pins (+5 V)
13 DVDD Digital power supply pin (+3 or +5 V)
3, 15, 17, 24 AVSS Analog power ground pins (0 V)
12 DVSS Digital power ground pin (0 V)
4 to 11 D1 to D8Digital output pins. D1: MSB, D8: LSB
14 CLK Clock input pin
21 VINA Analog input pin. Input range: VRB to VRT (2 Vp-p between 0.5 to 3 V)
19 VRT Reference voltage input pin (3 V )
20 VREFT Reference voltage output pin. When connected to VRT, the pin generates
0.6 × AVDD (3 V).
23 VRB Ref erence voltage in put pin (1 V)
22 VREFB Reference voltage output pin. When connected to VRB, the pin generates
0.2 × AVDD (1 V).
(FPT-24P-M01)
1
2
3
4
5
6
22
21
20
19
18
17
7
8
9
10
16
15
14
13
(TOP VIEW)
11
12
24
23
AVDD
AVDD
AVSS
(LSB) D8
D7
D6
D5
D4
D3
D2
(MSB) D1
DVSS
AVSS
VRB
VREFB
VINA
VREFT
VRT
AVDD
AVSS
AVDD
AVSS
CLK
DVDD
(FPT-24P-M03)
3
MB40C558
■ABSOLUTE MAXIMUM RATINGS (See WARNING)
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■RECOMMENDED OPERATING CONDITIONS
WARNING: Recommend ed operating conditions are normal operating ranges for the semiconductor device . All
the device’s electrical characteristics are warranted when operated within these ranges.
Always use semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty i s mad e wi th res pec t to use s, ope rating condi ti ons, or c omb ina tio ns not rep r ese nte d on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
(Continued)
Parameter Symbol Rating Unit
Min. Max.
Power supply voltage AVDD, DVDD –0.3 7.0 V
Input voltage CLK, VINA
VRT, VRB –0.3 AVDD+0.3 V
Output voltage D1 to D8–0.3 DVDD+0.3 V
Storage temperature Tstg –55 +125 °C
Parameter Symbol Value Unit
Min. Typ. Max.
Analog input voltage VINA VRB –VRT V
Analog reference voltage: T VRT ––3.00V
Analog reference voltage: B VRB 0.50 – – V
Analog reference voltage range VRT–VRB 1.90 2.00 2.10 V
Digital "H” level input voltage VIHD 2.4 – – V
Digital “L” level input voltage VILD ––0.8V
Digital input current IID ––5µA
Clock frequency fCLK 0.1 – 45 MHz
Minimum “H” level clock pulse width tw+10.0 – – ns
Minimum “L” level clock pulse width tw–10.0 – – ns
Operati ng temp er ature ra nge Ta –20 – 70 °C
4
MB40C558
(Continued)
• When using a single power supply
• When using dual power supplies
WARNING: Recommend ed operating conditions are normal operating ranges for the semiconductor device . All
the device’s electrical characteristics are warranted when operated within these ranges.
Always use semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty i s mad e wi th res pec t to use s, ope rating condi ti ons, or c omb ina tio ns not rep r ese nte d on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
Parameter Symbol Value Unit
Min. Typ. Max.
Power supply voltage AVDD, DVDD 4.75 5.00 5.25 V
Parameter Symbol Value Unit
Min. Typ. Max.
Power supply voltage AVDD 4.75 5.00 5.25 V
DVDD 2.70 3.00 3.30 V
5
MB40C558
■ELECTRICAL CHARACTERISTICS (Using a Single Power Supply)
DC Characteristics
(1) Analog section (AVDD = DVDD = 4.75 V to +5.25 V, Ta = –20°C to +70°C)
(2) Digital section
(AVDD = DVDD = 4.75 V to +5.25 V, Ta = –20°C to +70°C)
(3) Switching section
(AVDD = DVDD = 4.75 V to +5.25 V, Ta = –20°C to +70°C)
Parameter Symbol Value Unit
Min. Typ. Max.
Resolution – – 8 – bit
Lineari ty erro r DC precision LE – ±0.20 ±0.30 %
Differential linearity error DLE – ±0.12 ±0.20 %
Analog input capacity CINA –15–pF
Reference voltage: T VREFT –0.6 × AVDD –V
Reference voltage: B VREFB –0.2 × AVDD –V
Reference current IRB –16.0 –8.0 –2.0 mA
Analog power supply current AIDD – 18.0 31.0 mA
Digital power supply current DIDD – 9.0 15.0 mA
Parameter Symbol Value Unit
Min. Typ. Max.
Digital “H” level output voltage VOHD 4.2 – DVDD V
Digital “L” level output voltage VOLD ––0.4V
Digital “H” level output current IOH –400 – – µA
Digital “L” level output current IOL ––1.6mA
Parameter Symbol Value Unit
Min. Typ. Max.
Maxim um con ve rsi on rat e fs 45 – – MSPS
Digital output delay time tpd 0 5 14 ns
6
MB40C558
■ELECTRICAL CHARACTERISTICS (Using Dual Power Supplies)
DC Characteristics
(1) Analog section (AVDD = 4.75 V to +5.25 V, DVDD = 2.70 V to +3.30 V Ta = –20°C to +70°C)
(2) Digital section
(AVDD = 4.75 V to +5.25 V, DVDD = 2.70 V to +3.30 V Ta = –20°C to +70°C)
(3) Switching section
(AVDD = 4.75 V to +5.25 V, DVDD = 2.70 V to +3.30 V Ta = –20°C to +70°C)
Parameter Symbol Value Unit
Min. Typ. Max.
Resolution – – 8 – bit
Lineari ty erro r DC precision LE – ±0.20 ±0.30 %
Differential linearity error DLE – ±0.12 ±0.20 %
Analog input capacity CINA –15–pF
Reference voltage: T VREFT –0.6 × AVDD –V
Reference voltage: B VREFB –0.2 × AVDD –V
Reference current IRB –16.0 –8.0 –2.0 mA
Analog power supply current AIDD – 18.0 31.0 mA
Digital power supply current DIDD – 6.0 10.0 mA
Parameter Symbol Value Unit
Min. Typ. Max.
Digital "H" level output voltage VOHD 2.4 – DVDD V
Digital "L" level output voltage VOLD ––0.4V
Digital "H" level output current IOH –400 – – µA
Digital "L" level output current IOL ––1.6mA
Parameter Symbol Value Unit
Min. Typ. Max.
Maxim um con ve rsi on rat e fs 45 – – MSPS
Digital output delay time tpd 0 6 15 ns
7
MB40C558
■EQ UIVALENT CIRCUIT
• Clock input
• Analog input
• Reference voltage input
• Reference voltage output
• Digital output
AVDD
AVSS
CLK
AVDD
AVSS
VINA
AVDD
AVSS
VRT
AVDD
AVSS
VRB
AVDD
AVSS
VREFT
AVDD
AVSS
VREFB
D1 to D8
DVDD
DVSS
8
MB40C558
■TIMING CHART
■DIGITAL OUTPUT BUFFER LOAD CIRCUIT
SAMPLENSAMPLEN+1
tpd
tw+
3 V
0 V
CLK
VINA
VOH
VOL
D1 to D8
1.5 V
0.5 DVDDDATAN–2 DATAN–1 DATAN
tw–
(Note) CL value includes the floating capacitance of the jig and probe.
CL = 15 pF
To measurement pin Measurement point
DVSS
9
MB40C558
■ORDERING INFORMATION
Part number Package Remarks
MB40C558PF 24-pin, Plastic SOP
(FPT-24P-M01)
MB40C558PFV 24-pin, Plastic SSOP
(FPT-24P-M03)
10
MB40C558
■PACKAGE DIMENSIONS
(Continued)
+0.40
–0.20
+.016
–.008
+0.05
–0.02
+.002
–.001
+0.25
–0.20 +.010
–.008
13.97(.550)REF
1.27(.050)
TYP
INDEX 6.80
.268
0.15
.006
15.24 .600
(.307±.016)(.209±.012)
(.018±.004)
(STAND OFF)
(.020±.008)
0.50±0.20
5.30±0.30 7.80±0.40
0.05(.002)MIN
2.25(.089)MAX
0.45±0.10
Details of "A" part
0.50(.020)
0.20(.008)
0.18(.007)MAX
0.68(.027)MAX
"A"
M
Ø0.13(.005)
0.10(.004)
1994 FUJITSU LIMITED F24007S-3C-4
C
(MOUNTING HEIGHT)
Dimensions in mm (inches).
24-p in, Plastic SOP
(FPT-24P-M01)
11
MB40C558
(Continued)
+0.10
–0.05
+.004
–.002
+0.20
–0.10
+.008
–.004
+0.05
–0.02
+.002
–.001
*
*
INDEX
0.10(.004)
0.22
.009
1.25
.049
0.15
.006
"A"
(.299±.008)(.220±.004) 7.60±0.20 NOM
5.60±0.10 6.60(.260)
7.15(.281)REF
0.65±0.12(.0256±.0047)
7.75±0.10(.305±.004)
Details of "A" part
0 10°
(STAND OFF)
0.10±0.10(.004±.004)
(.020±.008)
0.50±0.20
1994 FUJITSU LIMITED F24018S-2C-2
C
(MOUNTING HEIGHT)
0 to 10°
Dimensions in mm (inches).
24-pin, Plastic SSOP
(FPT-24P-M03) *: These dimensions do not include resin protrusion.
MB40C558
FUJITSU LIMITED
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
The products described in this document are designed, developed
and manufactured as contemplated for general use, including
without limitation, ordinary industrial use, general office use,
personal use, and household use, but are not designed, developed
and manufactured as contemplated (1) for use accompanying fatal
risks or dangers that, unless extremely high safety is secured, could
have a serious effect to the public, and could lead directly to death,
personal injury, severe physical damage or other loss (i.e., nuclear
reaction control in nuclear facility, aircraft flight control, air traffic
control, mass transport control, medical life support system, missile
launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial
satellite).
Please note that Fujitsu will not be liable against you and/or any
third party for any claims or damages arising in connection with
above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You
must protect against injury, damage or loss from such failures by
incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Law of Japan, the prior
authorization by Japanese government will be required for export
of those products from Japan.
F9703
FUJITSU LIMITED Printed in Japan
