SMT30E Series 12Vin Single Output Preliminary Data - subject to change without notice DC/DC CONVERTERS Non-isolated POL Converter 1 NEW Product * * * * * * * 30A current rating Input voltage range: 8V to 14V Output voltage range: 0.8 to 3.63V Ultra high efficiency: 91% @ 12Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of TBD hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard surface-mount footprint The SMT30E series are non-isolated DC/DC converters packaged in a surface-mount footprint giving designers a cost effective solution for conversion from a 12V source. The SMT30E has a wide input range (8V to 14V) and offers a wide 0.8 to 3.63V output voltage range with a 30A load, which allows for maximum design flexibility and a pathway for future upgrades. The SMT30E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SMT130E offers compact size and efficiencies of up to 91%. Patent No. 6,786,736 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at 12Vin and 3.3Vout, full load at 25C unless otherwise stated EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage adjustability 0.8V to 3.63V Setpoint accuracy 1.3% typ. Line regulation 0.2% typ. Load regulation 1.5% typ. Total error band 3.0% typ. Minimum load 0A Overshoot/undershoot Ripple and noise None 5Hz to 20MHz 60mV pk-pk 25mV rms Temperature coefficient Transient response Slew rate = 0.5A/s 0.01%/C Vout = 1.5 Remote sense 50% to 75% load step 3% max. deviation 10s recovery to within 1.0% 10% Vo compensation Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency 91% Insulation voltage Switching frequency Non-isolated Fixed 1.3MHz typ. Approvals and standards (pending) EN60950 UL/cUL60950 Material flammability Dimensions UL94V-0 (LxWxH) 33.02 x 13.46 x 8.21mm 1.3 x 0.53 x 0.323 inches Weight 6.3g (0.22oz) Coplanarity MTBF 100m Telcordia SR-332 TBD hours INPUT SPECIFICATIONS Input voltage range Input current 8V to 14VDC No load (max.) Input current (max.) TBDmA ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) 9.2A max. @ Io max. and Vout = 3.3V Input reflected ripple Remote ON/OFF 220mA rms (See Note 1) Start-up time 20ms Operating ambient, temperature Non-operating -40C to +85C -40C to +125C PROTECTION Short-circuit protection Thermal protection Continuous Automatic recovery International Safety Standard Approvals (pending) UL/cUL CAN/CSA 22.2 No. (TBD) UL 60950 File No. (TBD) TUV Product Service (EN60950) Certificate No. (TBD). CB report and certificate to IEC60950 File Name: smt30e_12.pdf Rev (01): 22 Nov 2004 SMT30E Series 12Vin Single Output Preliminary Data - subject to change without notice DC/DC CONVERTERS Non-isolated POL Converter 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (MAX.) LINE LOAD MODEL NUMBER 108.9W 8.0V - 14.0V 0.8V - 3.63V 0A 30A 91% 0.2% 1.5% SMT30E-12W3V3 Part Number System with Options REGULATION SMT30E-12W3V3-T Packaging Options No Suffix = Trays T = Tape and Reel Product Family SMT = Surface Mount Rated Output Current 30 = 30Amps Output Voltage 0.8V - 3.63V Performance E = Enhanced Performance Type of Output W = Wide Input Voltage Output Voltage Adjustment of the SIL10-05Wxxx Series12 = 8V - 14V Output Voltage Adjustment of the SMT30E-12W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT30E-12W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8V to 3.63V. When the SMT30E-12W3V3 converter leaves the factory the output has been adjusted to the default voltage of 0.8V Notes Notes 1 A The derating curve represents the condition at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25C. This data is considered typical data for the converter. The SMT30E features a `Positive Logic' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT30E: Configuration Remote pin open circuit Remote pin pulled low [Von/off < 0.8V] Remote pin pulled high [Von/off >1.6V] Converter Operation Unit is ON Unit is OFF Unit is ON A `Negative Logic' Remote ON/OFF version is also possible with this converter. Please consult the factory for details. File Name: smt30e_12.pdf Rev (01): 22 Nov 2004 SMT30E Series 12Vin Single Output Preliminary Data - subject to change without notice DC/DC CONVERTERS Non-isolated POL Converter 3 40 30 0m/s 1m/s 2m/s 20 10 0 0 20 40 60 OUTPUT CURRENT (A) OUTPUT CURRENT (A) For the most current data and application support visit www.artesyn.com/powergroup/products.htm 40 30 0m/s 1m/s 2m/s 20 10 0 0 80 AMBIENT TEMPERATURE (C) 0m/s 1m/s 2m/s 20 10 0 60 OUTPUT CURRENT (A) OUTPUT CURRENT (A) 30 40 40 60 80 Figure 2 - Derating Curve Vin = 12V, Output Voltage = 1.5V (See Note A) 40 20 20 AMBIENT TEMPERATURE (C) Figure 1 - Derating Curve Vin = 12V, Output Voltage = 1.0V (See Note A) 0 NEW Product 40 30 0m/s 1m/s 2m/s 20 10 0 0 80 20 40 60 80 AMBIENT TEMPERATURE (C) AMBIENT TEMPERATURE (C) Figure 4 - Derating Curve Vin = 12V, Output Voltage = 2.5V (See Note A) Figure 3 - Derating Curve Vin = 12V, Output Voltage = 1.8V (See Note A) EFFICIENCY (%) 100 80 Vout = 1.0V Vout = 1.5V Vout = 1.8V Vout = 2.5V Vout = 3.3V 60 40 Vin 6 Remote ON/OFF 1 Cin 47F 20 2 SMT30E 4 5 3 Remote sense + Vout Trim RTRIM Load Cout 100F Gnd 0 0 5 10 15 20 25 30 OUTPUT CURRENT (A) Figure 5 - Efficiency vs Load Current Figure 6 - Standard Application Vin = 12V (See Note B) File Name: smt30e_12.pdf Rev (01): 22 Nov 2004 SMT30E Series 12Vin Single Output Preliminary Data - subject to change without notice Non-isolated POL Converter 4 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.190 [4.83] 0.190 [4.83] 0.190 [4.83] 0.297 [7.54] 0.310 [7.87] TOP VIEW 0.430 [10.92] 0.039 [1.00] 0.5300.010 [13.460.25] 0.039 [1.00] GND Vout Trim Sense +Vin BOTTOM VIEW 1.3000.010 [33.020.25] NEW Product 0.405 [10.29] 0.075 [1.91] DC/DC CONVERTERS Remote ON/OFF 0.048 [1.22] SIDE VIEW SEATING PLANE 0.319 [8.10] max. INSTALLED HT. CONNECTOR (6 PL) WIDTH : 0.112 0.003 [2.840.08] LENGTH : 0.062 0.0016 [1.570.04] All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER FUNCTION 1 Remote ON/OFF 2 Remote Sense + 3 Trim 4 +Vout 5 Ground 6 +Vin Figure 7 - Mechanical Drawing and Pinout Table Datasheet (c) Artesyn Technologies(R) 2004 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note www.artesyn.com File Name: smt30e_12.pdf Rev (01): 22 Nov 2004