APTGT300U170D4 Single switch VCES = 1700V IC = 300A @ Tc = 80C (R) Trench IGBT Power Module Application * Welding converters * Switched Mode Power Supplies * Uninterruptible Power Supplies * Motor control 1 3 5 2 2 1 Benefits * Outstanding performance at high frequency operation * Stable temperature behavior * Very rugged * Direct mounting to heatsink (isolated package) * Low junction to case thermal resistance * Easy paralleling due to positive TC of VCEsat Absolute maximum ratings Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate - Emitter Voltage Maximum Power Dissipation RBSOA Reverse Bias Safe Operation Area TC = 25C Max ratings 1700 480 300 600 20 2080 Tj = 125C 600A@1700V TC = 25C TC = 80C TC = 25C Unit V A January, 2004 3 V W These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website - http://www.advancedpower.com http://store.iiic.cc/ 1-3 APTGT300U170D4 - Rev 0 4 5 Features * Trench + Field Stop IGBT(R) Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated * Kelvin emitter for easy drive * Low stray inductance - M6 connectors for power - M4 connectors for signal * High level of integration APTGT300U170D4 All ratings @ Tj = 25C unless otherwise specified Electrical Characteristics Collector Emitter on Voltage VGE(th) IGES Gate Threshold Voltage Gate - Emitter Leakage Current Dynamic Characteristics Symbol Cies Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eoff Characteristic Input Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Test Conditions VGE = 0V, VCE = 25V f = 1MHz Inductive Switching (25C) VGE = 15V VBus = 900V IC = 300A RG = 4.7 Inductive Switching (125C) VGE = 15V VBus = 900V IC = 300A RG = 4.7 Diode Forward Voltage Er Reverse Recovery Energy Qrr Reverse Recovery Charge Test Conditions IF = 300A VGE = 0V IF = 300A VR = 900V di/dt =990A/s IF = 300A VR = 900V di/dt =990A/s Min RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Wt Package Weight Typ 24 0.9 200 100 750 20 2.4 6.4 1500 V nA Max Unit nF ns 100 ns 900 200 Tj = 125C 70 Tj = 25C 80 Tj = 125C 130 IGBT Diode http://store.iiic.cc/ Typ mJ Max 2.2 -40 -40 -40 3 1 Unit V mJ C Max 0.06 0.11 2500 APT website - http://www.advancedpower.com V 230 Tj = 25C Tj = 125C Tj = 25C M6 M4 Unit V mA 100 Min Junction to Case Torque 2.0 2.4 5.8 Typ 1.8 1.9 40 Symbol Characteristic TJ TSTG TC 5.2 Min Thermal and package characteristics VISOL Max 100 Symbol Characteristic VF Typ 1700 Turn Off Energy Reverse diode ratings and characteristics RthJC Min Unit C/W V 150 125 125 5 2 420 January, 2004 VCE(on) Test Conditions VGE = 0V, IC = 12mA VGE = 0V, VCE = 1700V Tj = 25C VGE = 15V IC = 300A Tj = 125C VGE = VCE , IC = 12mA VGE = 20V, VCE = 0V C N.m g 2-3 APTGT300U170D4 - Rev 0 Symbol Characteristic BVCES Collector - Emitter Breakdown Voltage ICES Zero Gate Voltage Collector Current APTGT300U170D4 APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website - http://www.advancedpower.com http://store.iiic.cc/ 3-3 APTGT300U170D4 - Rev 0 January, 2004 Package outline