MS-156-HRMJ-12 - HIROSE ELECTRIC

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

MS-156HF Series Halogen Free

2008.5

■Features

1. Low insertion loss

0.1 dB typical at 6 GHz (not mated with the plug).

2. Space-saving design

2.7 mm x 2.7 mm occupied board space.

3. Low profile

1.6 mm protrusion above the board.

4. Lightweight

0.025 g. total weight (without vacuum cap).

5. Durability

100 mating/unmating cycles, with corresponding plug.

Performs over a wide frequency range

Applicable frequencies range over a wide band,

from DC to 6 GHz.

Solder wicking prevention

Nickel plating barrier on the contacts prevents solder

compound intrusion (wicking) into the contact

engagement areas.

Board placement with automatic equipment

Packaged on tape-and-reel. Also available with a

vacuum pick-up cap over each switch.

RoHS compliant

All components and materials comply with the

requirements of the EU Directive 2002/95/EC.

10.

Halogen Free

Chlorine, and bromine are not used in the receptacles.

*Definition according to IEC 61249-2-21.

Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500

ppm max.

■Applications

Portable terminals, ETC, notebook computers (Bluetooth),

wireless LAN, POS terminals, GPS terminals, PDA, and any

small devices requiring verification of antenna/circuit

performance.

■Overview

Developed for inspection of high frequency

circuits used in portable terminals.Verification of

the circuit performance is

accomplished by simply

inserting the external plug

in the board mounted

receptacle.This action re-directs the circuit from

normal condition to the plug side. Removing the

plug restores circuit to its normal condition.

MS-156HF

Space-saving design

Low profile -1.6 mm protrusion above the board.

Lightweight -0.025 g. total weight.

Several types of plugs

Several types of SMA conversion adapters

Adapter for plug inspection

Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

■Specifications

100 mA max.

100 V DC

100 V AC / 1 minute

Frequency:10 to 55 Hz, single amplitude of

0.75 mm, 2 hours in each of the 3 axis.

Acceleration of 490 m/s2, 6 ms duration, sine half-

wave waveform, 3 cycles in each of the 3 axis

Temperature: -55ç /+5ç to +35ç /+85ç /+5ç to +35ç

Time: 30 /2 to 3 /30 /2 to 3 (Minutes)

100 cycles

96 hours at 85ç

96 hours at -55ç

96 hours at 40±2ç, and humidity of 90 to 95%

100 cycles

100 mø max.

1000 Mø min.

No flashover or insulation breakdown

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

1. Contact resistance

2. Insulation resistance

3. Withstanding voltage

4. Vibration

5. Shock

6. Temperature cycle

7. High temperature exposure

8. Low temperature exposure

9. Humidity

10.

Durability (mating/un-mating,

with corresponding plug)

Item Specification Conditions

Shell

Insulator

Common terminal

Antenna terminal

Phosphor bronze

6T Nylon

Beryllium copper

Phosphor bronze

Gold plated

---------------------------

Selective gold plated

---------------------------

UL94HB

---------------------------

--------

-------------------

Part Material Finish Remarks

Operating temperature range

Rated power

Frequency range

Insertion loss

Isolation

V.S.W.R

Not mated with the plug

-40ç to +85ç

DC to 6GHz

0.1 dB max. (DC to 2.5GHz)

0.15 dB max. (2.5GHz to 6.0GHz)

1.2 max. (DC to 2.5GHz)

1.3 max. (2.5GHz to 6.0GHz)

Mated (MS-156-HRMJ-3)

-40ç to +85ç

DC to 6GHz

0.5 dB max. (DC to 3.0GHz)

1.2 dB max. (3.0GHz to 6.0GHz)

1.4 max. (DC to 3.0GHz)

1.8 max. (3.0GHz to 6.0GHz)

20 dB max. (DC to 2.0GHz)

15 dB max. (2.0GHz to 4.0GHz)

13 dB max. (4.0GHz to 6.0GHz)

■Materials

No electrical discontinuity of 1 μs or more

Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

BTypical Data

0.0 1.0 2.0 3.0 4.0 5.0 6.0

[dB]

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2.0

INSERTION LOSS

V.S.W.R.

-1.0

-0.9

-0.8

-0.7

-0.6

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

[GHz]

4.02.0

ISOLATION

DC 6.0 [GHz]

[dB]

Insertion Loss [dB]

V.S.W.R.

Isolation [dB]

●NORMALLY CLOSED(N.C)~(Not mated with the plug)

4.02.0

INSERTION LOSS

V.S.W.R.

1.0

1.2

1.4

1.6

1.8

DC 6.0 [GHz]

[dB]

0.0

0.5

1.0

1.5

Insertion Loss [dB]

●OPEN(N.O)~(Mated with the plug)

●ISOLATION

Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

■Receptacle

BPCB mounting pattern and metal mask dimensions

0.4

1.6

Ø2

0.6 (0.05)

2.7

Center of

mating plug

1.4

2.7 A terminal

C terminal

Part Number

MS-156HF

MS-156HF(01)

MS-156HF(20)

CL No.

358-0238-4

358-0238-4-01

358-0238-4-20

10,000 pieces/reel

100 pieces/bag

2,000 pieces/reel

Packaging

1.15

Ø2.75

Ｅ

1.4

2.65

( 3.4 )

POINT M

2.65

1.25

( 2.9 )

0.9 0.450.3

1.4

0.55

1.4

0.7

0.55

1.4

0.9

1.25

This area must be free of conductive traces and resist field.

0.1 to 0.12 thick

Metal mask dimensions

PCB mounting pattern

Part Number

MS-156HF(02)

MS-156HF(22)

CL No.

358-0238-4-02

358-0238-4-22

8,500 pieces/reel

1,500 pieces/reel

Packaging

●With vacuum pick-up cap

●Without vacuum pick-up cap

Note:Vacuum pick-up cap flat can

be oriented in any direction.

Orientation will not affect

placement of the switch on the

board.

* Lead coplanarity within 0.1mm

* Request drawing of the specific part for exact dimensions and tolerances.

* Specified dimensions must be followed to assure correct board placement and performance.

MS-156HF Plug MS-156HF

Plug

Not mated with the plug(N.C) Mated with the plug(N.O)

BCircuit diagram

Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

BPrecautions

Recommended Mounting of MS-156HF coaxial switch

on the PCB during the manufacturing process

MS-156HF

To avoid contamination when cutting-off,

do not place PCB bridge close to the

mounted MS-156HF.

1. This product is intended to be used for circuit inspection only. Consult us if any other application is

considered.

2. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces. Placing

conductive traces in this area may affect performance and will void product warranties.

When the bottom surface of the product (i.e., the shaded area of the specified land dimensions

diagram on the previous page) has been processed with a susbtrate copper trace and resist processing,

Hirose Electric will not be able to warrant the product.

3. Do not use hand soldering for mounting of MS-156HF.

Doing so could result in solder and flux wicking to the contact areas.

4. Exercise caution as not to allow any debris to enter the board mounted MS-156HF when cutting PCB.

5. Do not use the washing process.

6. Please refrain from using the product in environments specifically affected by excessive vibration, shock,

dust, high humidity, gases, very high temperatures and very low temperatures such as outdoor

equipment. It might cause degradation or destruction of the product.Even if it endures during a short time,

long time quarification is not quaranteed.

7. For use of this product, be sure to put contact area of plug on position P(P4 full view) perpendicularly.

8. Plugs can be roughly classified to two types.

- For mass production line automatic check (Press down type)

- For manual check (With retentive lock) : Unable to be used at production line.

9. When automatic inspections are to be performed during the manufacturing operations, request the MS-

156 plug connector manual for examples of implementation.

Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

BPackaging Specifications

●Without vacuum cap ●Reel dimensions

2.2

Ø1.5

5.5 1.75

12.4

Ø13

ØR

(Ø60)

Unreeling direction

●With vacuum cap ●Reel dimensions

2.6

Ø1.5

5.5 1.75

12.4

Ø13

ØR

(Ø60)

Unreeling direction

BRecommended Temperature Profile

qMaximum temperature

wPeak temperature

ePeak temperature time

r230ç min.

t150ç to 180ç

Metal mask thickness

Reflow cycles : 0.1 to 0.12 mm

: 2 cycles

: 250ç

: 240ç to 250ç

: 10 sec. max.

: 30 sec. max.

: 60 sec. to 90 sec.

Using Lead-free Solder paste

30 sec.max.

Temperature (ç)

100

150

200

180

230

250

60 sec. to 90 sec. Time (sec.)

10 sec.max.

Part Number

MS-156HF

MS-156HF(20)

Reel Size

R = Ø380mm

R = Ø180mm

10,000 pieces/reel

2,000 pieces/reel

Packaging

Part Number

MS-156HF(02)

MS-156HF(22)

Reel Size

R = Ø380mm

R = Ø180mm

8,500 pieces/reel

1,500 pieces/reel

Packaging

Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

■Plugs

●Press down, right angle

Ø3.2

20.9

Ø4

Ø6

4-C1

11.15 2.9

Part Number

Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)

CL No. Durability

358-0173-0MS-156-C(LP)-1 10,000 Times

●Simplified lock, right angle

Ø7.9

Ø5.48

Ø4

Ø0.5

4-C1

8.2510

25.25

Ø3.2

1.6

Part Number

Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)

CL No. Durability

358-0174-3MS-156-C(LP)-2 500 Times

■SMA Conversion Adapters

●Simplified lock, straight, short

Ø0.5

24.4

1.6 8

1/4-36UNS-2A

Ø4.27

Ø5.48

Ø8.5

5.2

11.3

Part Number CL No. Durability

358-0170-2MS-156-HRMJ-2 500 Times

●Simplified lock, straight, long

Ø0.5

8.5

1/4-36UNS-2A

5.219.8

32.9

Ø4.3

Ø5.48

1.6

Part Number CL No. Durability

358-0177-1MS-156-HRMJ-5 500 Times

Feb.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

●Press down, with flange, short

1/4-36UNS-2A

18.63

8.12

28.13

Ø20

Ø3.4

Ø5

2-Ø2.6

Part Number CL No. Durability

358-0171-5MS-156-HRMJ-3 10,000 Times

33.01

23.51

Ø3.4

Ø5

2-Ø2.6

1/4-36UNS-2A

Ø20

Part Number CL No. Durability

358-0198-1MS-156-HRMJ-14 10,000 Times

●Press down, with flange

(Increased self alignment)

Ø4.3

Ø5.9

2-Ø2.6

Ø20

28.13

18.63

8.12

1/4-36UNS-2A

Part Number CL No. Durability

358-0181-9MS-156-HRMJ-6 10,000 Times

●Press down, with flange, long

●Floating

4.27

1.45

2-Ø2.6

Ø24

Ø3.4

Ø5

Ø10

2.5

20.7

31.06

1/4-36UNS-2A

Part Number CL No. Durability

358-0180-6MS-156-HRMJ-9 10,000 Times

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

●Floating (Self-Pressing)

Ø3.8

11.75

28.24 2.5

38.6

1/4-36UNS-2A

1.45

Ø5.4

Ø10.3

Ø24

2-Ø2.6

Part Number CL No. Durability

358-0194-0MS-156-HRMJ-10 10,000 Times

Ø4.3

Ø5.9

Ø10.3

11.75

29.49 2.5

39.85

3.75

1/4-36UNS-2A

Ø24

2-Ø2.6

Part Number CL No. Durability

358-0196-6MS-156-HRMJ-12 10,000 Times

●Floating (Self-Pressing)

30 12

2.5

14.75

7.3

Ø4.3

Ø5.9

Ø11

3.75

1/4-36UNS-2A

2-Ø2.6

M11.9

17.3

Ø24

●Floating (Self-Pressing)

●Adapter for plug inspection

Ø2

Ø6

8.3

Ø9

3 6.3

16.05

0.75

1/4-36UNS-2A

Part Number CL No. Durability

358-0188-8MS-156R-HRMJ-1 500 Times

Part Number CL No. Durability

358-0205-5MS-156LP-HRMJ-4 10,000 Times

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

●Adapter for plug inspection

0.75 13.21 2.54

41.9

14.3

5/8-24NEF-2A

Ø2

Ø5.45

Ø22

Part Number CL No. Durability

358-0176-9MS-156R-NJ-1 500 Times

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

NOTES :

MS-156HF Series●Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

USA:

HIROSE ELECTRIC (U.S.A.), INC. Headquarters

2688 Westhills Court, Simi Valley, CA 93065-6235

Phone : 1-805-522-7958

Fax : 1-805-522-3217

http://www.hiroseusa.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. Dallas Office

1701 N. Greenville Ave. Ste 817, Richardson, TX

75081

Phone : 1-469-330-9200

Fax : 1-469-330-9205

http://www.hiroseusa.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. Chicago Office

2777 Finley Road, Suite 28 Downers Grove, IL

60148

Phone : 1-630-916-1455

Fax : 1-630-916-1451

http://www.hiroseusa.com

CHINA:

HIROSE ELECTRIC CO., LTD. Shenzhen Office

Room 1902-05, Office Tower Shun Hing Square, DiWang

Commercial Centre 5002 ShenNanDong Road, ShenZhen

Phne : 86-755-8207-0851

Fax : 86-755-8207-0873

http://www.hirose-china.com.cn

UNITED KINGDOM:

HIROSE ELECTRIC UK LTD.

Crownhill Business Centre 22 Vincent Avenue

Crownhill, Milton Keynes MK8 OAB

Phone : 44-1908-305400

Fax : 44-1908-305401

http://www.hirose.co.uk

HONG KONG:

HIROSE ELECTRIC CO., LTD.

Unit 1102, Energy Plaza, 92 Granville Road,

Tsim Sha Tsui East, Kowloon

Phone : 852-2803-5338

Fax : 852-2591-6560

http://www.hirose-hongkong.com.hk

GERMANY:

HIROSE ELECTRIC GmbH

Herzog-Carl-Strasse 4 D-73760 Ostfildern

(Scharnhauser Park)

Phone : 49-711-4560-02-1

Fax : 49-711-4560-02-299

http://www.hirose.de

KOREA:

HIROSE KOREA CO., LTD.

(#2NA311,Shihwa Industrial Complex),

1261-10,

Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 429-450

Phone : 82-31-496-7000,7124

Fax : 82-31-496-7100

http://www.hirose.co.kr

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei

Phone : 886-2-2557-7351,7352

Fax : 886-2-2552-9851

http://www.hirose-taiwan.com.tw

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Beechavenue 46,1119 PV

Schiphol-Rijk

Phone : 31-20-6557490

Fax : 31-20-6557469

http://www.hiroseeurope.com

FINLAND:

Hirose Electric Europe B.V. Finland Office

Teknobulevardi 3-5 01530 VANTAA

Phone : 358-9-2517-8459

Fax : 358-9-2517-8460

http://www.hiroseeurope.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. New York Office

510 Broadhollow Road, Suite 305, Melville, NY

11747

Phone : 1-516-249-5259

http://www.hiroseusa.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)

37650 Professional Center Drive, Suite 120A,

Livonia, MI 48154

Phone : 1-734-542-9963

Fax : 1-734-542-9964

http://www.hiroseusa.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. North California Office

20400 Stevens Creek Blvd., Ste 250, Cupertino,

CA 95014

Phone : 1-408-253-9640

Fax : 1-408-253-9641

http://www.hiroseusa.com

CHINA:

HIROSE ELECTRIC CO., LTD. Beijing Office

Unit 1605, Block A, ZhuBang2000 BusinessCenter,

No.100, Balizhuang Xili, Chaoyang District, Beijing, 10025

Phone : 86-10-5165-9332

Fax : 86-10-8586-1418

http://www.hirose-china.com.cn

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

1501-02, Cross Tower Building 318 Fuzhou Road,

Huang Pu District Shanghai, 200001

Phone : 86-21-6391-3355

Fax : 86-21-6391-3335

http://www.hirose-china.com.cn

SINGAPORE:

HIROSE ELECTRIC CO., LTD.

10 Anson Road #26-16 International Plaza 079903

Phone : 65-6324-6113

Fax : 65-6324-6123

http://www.hirose-singapore.com.sg

The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933

http://www.hirose.com

http://www.hirose-connectors.com