CM6320 EMI Filter with ESD Protection for SIM Card Applications Product Description http://onsemi.com The CM6320 is a 24-bump EMI filter with ESD protection device for data line application in a 0.4 mm pitch, 5 x 5 CSP form factor. It is fully compliant with IEC 61000-4-2. The CM6320 is RoHS II compliant. Features * 24-Bump, 1.96 mm X 1.96 mm Footprint Chip Scale Package * These Devices are Pb-Free and are RoHS Compliant WLCSP24 CASE 567CK ELECTRICAL SCHEMATIC R Level 4 Level 4 GND 1 of 10 Filter Channels MARKING DIAGRAM + 6320 YYWW XXXX 6320 YYWW XXXX = CM6320 = Date Code = Last four digits of lot # ORDERING INFORMATION Device Package Shipping CM6320 CSP-24 (Pb-Free) 5000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2011 April, 2011 - Rev. 3 1 Publication Order Number: CM6320/D CM6320 PACKAGE / PINOUT DIAGRAMS Top View (Bumps Down View) Orientation Marking 1 + A 2 3 4 Bottom View (Bumps Up View) 5 5 4 3 2 1 A1 Indicator A B B 6320 C C D D E E Table 1. PIN DESCRIPTIONS A5 = Line 1 A4 = Line 2 B5 = Line 3 B4 = Line 4 C5 = Line 5 C4 = Line 6 D5 = Line 7 D4 = Line 8 E5 = Line 9 E4 = Line 10 A3 = GND A2 = Line 1 A1 = Line 2 B2 = Line 3 B1 = Line 4 C3 = GND C2 = Line 5 C1 = Line 6 D3 = GND D2 = Line 7 D1 = Line 8 E3 = GND E2 = Line 9 E1 = Line 10 ELECTRICAL SPECIFICATIONS AND CONDITIONS Table 2. PARAMETERS AND OPERATING CONDITIONS Parameter Rating Units Storage Temperature Range -55 to +150 C Operating Temperature Range -40 to +85 C 60 mW Power Dissipation at 70C per Channel Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Note 1) Symbol Parameter Conditions R Resistance C Capacitance per Line At 1 MHz, VIN = 0 V; (Note 2) VBR Breakdown Voltage IR = 1 mA ILEAK Leakage Current per Channel VIN = 3.0 V VESD ESD Protection Peak Discharge Voltage a) Contact Discharge per IEC 61000-4-2 standard b) Air Discharge per IEC 61000-4-2 standard (Notes 2 and 3) Min Typ Max Units 56 70 84 W 30 pF 7.8 10 V 10 100 nA 6 15 15 1. All parameters specified at TA = 25C unless otherwise noted. 2. These parameters guaranteed by design and characterization. 3. Standard IEC 61000-4-2 with CDischarge = 150 pF, RDischarge = 330 W. http://onsemi.com 2 kV CM6320 RF CHARACTERISTICS TA = 255C, DC Bias = 0 V, 50 W Environment Figure 1. Insertion Loss (0 V Bias) http://onsemi.com 3 CM6320 PACKAGE DIMENSIONS WLCSP24, 1.96x1.96 CASE 567CK-01 ISSUE O D E PIN A1 REFERENCE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. COPLANARITY APPLIES TO SPHERICAL CROWNS OF SOLDER BALLS. B DIM A A1 A2 b D E e E 2X 0.05 C 2X 0.05 C TOP VIEW MILLIMETERS MIN MAX 0.63 0.57 0.17 0.24 0.40 REF 0.24 0.29 1.96 BSC 1.96 BSC 0.40 BSC A2 0.05 C A RECOMMENDED SOLDERING FOOTPRINT* 0.05 C NOTE 3 24X A1 C SEATING PLANE A1 PACKAGE OUTLINE e b 0.05 C A B 0.03 C SIDE VIEW E e 0.40 PITCH D C 24X 0.40 PITCH B A 1 2 3 4 0.25 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 5 BOTTOM VIEW ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative CM6320/D