SIDACtor® Protection Thyristors
166
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
SIDACtor® Series - Modified TO-220
Electrical Characteristics
The SIDACtor® Series Modified TO-220 are designed to
protect baseband equipment from damaging overvoltage
transients.
The series provides a robust single port through-hole
solution that enables voice though DS-1 equipment to
comply with various global regulatory standards.
Description
Features and Benefits
t Low voltage overshoot
t Low on-state voltage
t Does not degrade with
use
t Modified TO-220 Package
t Fails short circuit when
surged in excess of
ratings
t Single-port protection
t Lead forms available
1
2
3
(T)
(R)
(G)
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
PIN 1
PIN 2
PIN 3
Applicable Global Standards
t5*""
t5*"#
t*56,&OIBODFE
Level*
t*56,#BTJD-FWFM
t(3*OUFSCVJMEJOH
t(3*OUSBCVJMEJOH
t*&$
t:%5
t:%5
t:%5
*A/B-rated parts require series resistance
Part Number Marking
VDRM
@lDRM=5μA
VS
@100V/μs
VDRM
@lDRM=5μA
VS
@100V/μs
VT
@IT=2.2 A IHISIT
Capacitance
@1MHz, 2V bias
V min V max V min V max V max mA
min
mA
max
A
max pF min pf max
Pins 1-2, 3-2 Pins 1-3 Pins 1-2, 3-2
P0602AALxx P0602AA 25 40 50 80 4 50 800 2.2
See Capacitance
Values Table
P1402AALxx P1402AA 58 77 116 154 4 150 800 2.2
P1602AALxx P1602AA 65 95 130 190 4 150 800 2.2
P2202AALxx P2202AA 90 130 180 260 4 150 800 2.2
P2702AALxx P2702AA 120 160 240 320 4 150 800 2.2
P3002AALxx P3002AA 140 180 280 360 4 150 800 2.2
P3602AALxx P3602AA 170 220 340 440 4 150 800 2.2
P4202AALxx P4202AA 190 250 380 500 4 150 800 2.2
P4802AALxx P4802AA 220 300 440 600 4 150 800 2.2
P6002AALxx P6002AA 275 350 550 700 4 150 800 2.2
Table continues on next page.
SIDACtor® Protection Thyristors
167
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Capacitance Values
Part Number
pF
Pin 1-2, 3-2
Tip-Ground, Ring-Ground
pF
Pin 1-3
Tip-Ring
MIN MAX MIN MAX
P0602ACLxx 25 250 10 145
P1402ACLxx 55 155 30 90
P1602ACLxx 45 145 25 85
P2202ACLxx 45 115 25 65
P2702ACLxx 40 105 20 60
P3002ACLxx 35 95 20 55
P3602ACLxx 35 90 15 50
P4202ACLxx 30 85 15 50
P4802ACLxx 30 85 15 50
P6002ACLxx 30 80 15 45
Part Number Marking
VDRM
@lDRM=5μA
VS
@100V/μs
VDRM
@lDRM=5μA
VS
@100V/μs
VT
@IT=2.2 A IHISIT
Capacitance
V min V max V min V max V max mA
min
mA
max
A
max
Pins 1-2, 3-2 Pins 1-3 Pins 1-2, 3-2
P0602ABLxx P0602AB 25 40 50 80 4 50 800 2.2
See
Capacitance
Values Table
P1402ABLxx P1402AB 58 77 116 154 4 150 800 2.2
P1602ABLxx P1602AB 65 95 130 190 4 150 800 2.2
P2202ABLxx P2202AB 90 130 180 260 4 150 800 2.2
P2702ABLxx P2702AB 120 160 240 320 4 150 800 2.2
P3002ABLxx P3002AB 140 180 280 360 4 150 800 2.2
P3602ABLxx P3602AB 170 220 340 440 4 150 800 2.2
P4202ABLxx P4202AB 190 250 380 500 4 150 800 2.2
P4802ABLxx P4802AB 220 300 440 600 4 150 800 2.2
P6002ABLxx P6002AB 275 350 550 700 4 150 800 2.2
P0602ACLxx P0602AC 25 40 50 80 4 50 800 2.2
P1402ACLxx P1402AC 58 77 116 154 4 150 800 2.2
P1602ACLxx P1602AC 65 95 130 190 4 150 800 2.2
P2202ACLxx P2202AC 90 130 180 260 4 150 800 2.2
P2702ACLxx P2702AC 120 160 240 320 4 150 800 2.2
P3002ACLxx P3002AC 140 180 280 360 4 150 800 2.2
P3602ACLxx P3602AC 170 220 340 440 4 150 800 2.2
P4202ACLxx P4202AC 190 250 380 500 4 150 800 2.2
P4802ACLxx P4802AC 220 300 440 600 4 150 800 2.2
P6002ACLxx P6002AC 275 350 550 700 4 150 800 2.2
Part Number
pF
Pin 1-2, 3-2
Tip-Ground, Ring-Ground
pF
Pin 1-3
Tip-Ring
MIN MAX MIN MAX
P0602AALxx 15 145 10 90
P1402AALxx 40 60 20 35
P1602AALxx 35 60 20 35
P2202AALxx 30 50 15 30
P2702AALxx 25 45 15 25
P3002AALxx 25 40 15 25
P3602AALxx 25 35 10 20
P4202AALxx 25 35 10 20
P4802AALxx 20 35 10 20
P6002AALxx 20 35 10 20
P0602ABLxx 15 250 10 145
P1402ABLxx 40 155 20 90
P1602ABLxx 35 145 20 85
P2202ABLxx 30 115 15 65
P2702ABLxx 25 105 15 60
P3002ABLxx 25 95 15 55
P3602ABLxx 25 90 10 50
P4202ABLxx 25 85 10 50
P4802ABLxx 20 85 10 50
P6002ABLxx 20 80 10 45
Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias.
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional (unless otherwise noted).
- XX Part Number Suffix: ‘RP’ (Reel Pack), Blank (Bulk Pack), or ‘60’ (Type 60 lead form bulk pack)
Electrical Characteristics (continued)
SIDACtor® Protection Thyristors
168
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Package Symbol Parameter Value Unit
Modified
TO-220
PIN 1
PIN 2
PIN 3
TJOperating Junction Temperature Range UP °C
TSStorage Temperature Range UP °C
R0JA Thermal Resistance: Junction to Ambient 60 °C/W
Thermal Considerations
IH
IT
IS
IDRM
VDRM
VT
+V
-V
+I
-I
VS
50
100
0
t
r
t
d
0
Peak
Value
Half Value
t – Time (μs)
I
PP
– Peak Pulse Current – %I
PP
t
r
= rise time to peak value
t
d
= decay time to half value
Waveform = t
r
x t
d
V-I Characteristics tr x td Pulse Waveform
25°C
Case Temperature (T
C
) - ºC
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20 0 20 40 60 80 100 120 140 160
Ratio of I
H
I
H
(T
C
= 25ºC)
Normalized VS Change vs. Junction Temperature
Normalized DC Holding Current vs. Case Temperature
Surge Ratings
Series
IPP ITSM
50/60 Hz di/dt
0.2x310 1
0.5x700 2
2x10 1
2x10 2
8x20 1
1.2x50 2
10x160 1
10x160 2
10x560 1
10x560 2
5x320 1
9x720 2
10x360 1
10x360 2
10x1000 1
10x1000 2
5x310 1
10x700 2
A min A min A min A min A min A min A min A min A min A min A/μs max
A20 15015090 507575 45 7520500
B 25 250 250 150 100 100 125 80 100 25 500
C 50 500 400 200 150 200 175 100 200 50 500
Notes:
1 Current waveform in μs
2 Voltage waveform in μs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$
- The device must initially be in thermal equilibrium with -40°C < TJ <¡$
-8
-40 -20 0 20 40 60 80 100 120 140 160
-6
-4
0
2
4
6
8
10
12
14
Junction Temperature (T
J
) – °C
Percent of V
S
Change – %
25 °C
SIDACtor® Protection Thyristors
169
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Soldering Parameters
Physical Specifications Environmental Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material UL recognized epoxy meeting flammability
classification 94V-0
Part Numbering
CONSTRUCTION
VARIABLE
PACKING OPTIONS
IPP RATING
RoHS COMPLIANT
TYPE
P = SIDACtor
P
xLxx
MEDIAN VOLTAGE
PACKAGE TYPE
xxx 2 A
Blank: Bulk
RP: Reel Pack
60: Type 60 Lead Form
(Special order item.
For type 60 orders,
contact factory)
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak ¡$PS¡$
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Temp Cycling
¡$UP¡$NJOEXFMMVQUP
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC¡$3)VQUPIST&*"
JEDEC, JESD22-A-101
High Temp Storage ¡$IST.*-45%.FUIPE
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
¡$UP¡$NJOEXFMMTFDUSBOTGFS
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
¡$3)BUNVQUPIST&*"
JEDEC, JESD22-A-102
Resistance to Solder
Heat ¡$TFDT.*-45%.FUIPE
Moisture Sensitivity
Level
3)¡$ISTSFnPXDZDMFT
¡$1FBL+&%&$+45%-FWFM
Reflow Condition Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (Ts(min))¡$
- Temperature Max (Ts(max))¡$
- Time (Min to Max) (ts)60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak) 3°C/sec. Max.
TS(max) to TL - Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus) ¡$
- Temperature (tL)60-150 secs.
Peak Temp (TP)¡$
Time within 5°C of actual Peak Temp (tp)30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (TP)8 min. Max.
Do not exceed ¡$
Part Marking
xxxxx
XXXXXXXXX
Part Marking Code
(Refer to Electrical Characteristics Table)
Date Code
SIDACtor® Protection Thyristors
170
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Packing Options
Package
Type Description Quantity Added Suffix Industry
Standard
A
Modified TO-220
Tape and Reel Pack 700 RP EIA-468-B
Modified TO-220
Bulk Pack 500 N/A N/A
Modified TO-220
Type 60 Lead Form
Bulk Pack
500
60
(special order item,
contact factory for details)
N/A
Tape and Reel Specification — Modified TO-220
1.626
(41.15)
0.720
(18.29) 0.360
(9.14)
0.240
(6.10) 0.019
(0.5)
0.750 ± 0.010
(19.05 ± 0.25)
0.500
(12.7)
0.100
(2.54) 0.100
(2.54)
14.173 (360.0)
Dimensions are in inches
(and millimeters).
1.968
(50.0)
Direction of Feed
Dimensions - Modified TO-220
D
F
P
G
A O
Tem p er at u r e
Measurement
Po i n t
PIN 3
PIN 2
PIN 1
J
H
L
KM
N
The modified TO-220 package is designed to
meet mechanical standards as set forth in
JEDEC publication number 95.
Inches Millimeters
Min Max Min Max
A 0.400 0.410 10.16 10.42
D 0.360 0.375 9.14 9.53
F 0.110 0.130 2.80 3.30
G 0.540 0.575 13.71 14.61
H 0.025 0.035 0.63 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.90
M 0.070 0.085 1.78 2.16
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.290 0.310 7.37 7.87
