Emboss Tape SDK CONNECTOR Specifications ------------------- This connector is designed for SD Card & MMC (Multi media card), complying with the SD Card Association standard, and is with the switch for Write-protection & Carddetection. And due to Push-push mechanism design, its card can be easily ejected by push-push operation. * Space saving design * The amount of card ejection * Outstanding durability * Prevention of reverse card insertion * Current rating: 0.5A AC, DC * Voltage rating: 5V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Recommendatory PC board thickness: 0.6mm to 1.0mm [When it is mounted on the FPC, recommendable reinforcing layer thickness is 0.6mm min.] * Contact resistance: (Signal part) Initial value/ 30m max. After environmental testing/ 60m max. (Switch part) Initial value/ 100m max. After environmental testing/ 100m max. * Insulation resistance: 1,000M min. at 500V DC * Withstanding voltage: 500V AC/minute * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 13.1950.05 11.3550.05 9.750.05 8.050.05 1.40.05 7.55min Terminal (GND) 0.90.05 13.3950.05 1.2min 0.90.05 Shell GND 28.10.05 1.20.05 Shell GND 1.350.05 Shell GND Connector outline 2.80.05 13.1950.05 (1.45) 5.60.1 Note: 1. The above figure is the figure viewed from the connector mounting side. Note: 2. Tolerances are non-cumulative: 0.05mm for all centers. Note: 3. The dimensions above should serve as a guideline. Contact JST for details. (1.45) 0.15 2.8 1.8 5.60.1 Card center Write protect switch 1.8 23.40.05 1.20.05 No.1 No.9 No.2 No.3 No.4 No.8 No.7 No.6 Shell GND 8.05min 10.05 0.45 7.3 9-1.10.05 1.20.05 10.05 1.20.05 9.750.05 7.150.05 24.35 21.40.05 23.40.05 27.15 No.5 6xP2.5=150.05 5.6250.05 Card detection switch 7.750.05 9.85min 10.05 27.7 0.05 PC board layout (for reference) Pattern prohibition area Connector 27.1 12.895 Circuit No.8 Circuit No.1 11.355 6xP2.5=15 Circuit No.9 1 Circuit No.2 30 (33.6) when pushing in a card (34.6) when putting in a card (8.4) 2.8 (43) when releasing a card 20.95 24.35 27.15 9.3 6.7 5.625 Model No. SDK-9BNS-K13-GS-TB 450 Material and Finish Housing, Guide: Heat resisting resin, UL94V-0 Contact: Copper alloy, nickel-undercoated, selective gold-plated, selective tin-plated (reflow treatment) Terminal: Copper alloy, nickel-undercoated, gold-plated Card detection switch: Copper alloy, nickel-undercoated, gold-plated Write protect switch: Copper alloy, nickel-undercoated, selective gold-plated, selective tin-plated (reflow treatment) Card lock: Copper alloy, tin-plated Joint rod, Spring: SUS Shell: SUS, Solder tail/ selective nickel-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: This products listed above are supplied on embossed-tape. Card centor Q'ty / reel