CE 1N4001G THRU 1N4007G
CHENYI ELECTRONICS GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
Reverse Voltage - 50 to 1300 Volts
Forward Current - 1.0Amperes
FEATURES
. The plastic package carries Underwrites Laboratory
Flammability Classification 94V-0
. High current capability
. Low reverse leakage
. Glass passivated junction
. Low forward voltage drop
. High temperature soldering guaranteed: 250 /10 seconds,
0.375"(9.5mm)lead length,5lbs.(2.3kg) tension
MECHANICAL DATA
. Case: JEDEC DO-41 molded plastic body
. Terminals: Plated axial lead solderable per MIL-STD-750,method 2026
. Polarity:Color band denotes cathode end
. Mounting Position: Any Dimensions in inches and (millimeters)
. Weight: 0.012 ounce, 0.33 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive)
load. For capacitive load,derate by 20%)
Symbols 1N
4001G 1N
4002G 1N
4003G 1N
4004G 1N
4005G 1N
4006G 1N
4007G Units
Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Macimum average forward rectified
current 0.375"(9.5mm)lead length at TA=75
Peak forward surge current 8.3ms half
sing-wave superimposed on rated load
(JEDEC method)
Maximum instantaneous forward voltage at 1.0 A VFVolts
Maximum reverse TA=25
current at rated DC blocking voltage TA=100 R JA
R JL
Typical junction Capacitance(Note 2) CJpF
TJ
TSTG
Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V DC
2.Thermal resistance from juntion to ambient and from junction lead at 0.375"(9.5mm)lead length,
P.C.B. Mounted
15.0
Operating and storage temperature range -65 to +175
Typeical thermal resistance(Note 1) 50.0 /W
25.0
1.1
IR5.0 A
50.0
I(AV) 1.0 Amp
IFSM 30.0 Amps
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2