APT1608QWF/D-AMT - Kingbright Corporation

SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 1 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613

1.6X0.8mm SMD CHIP LED LAMP

Part Number: APT1608QWF/D-AMT White

Package Dimensions

Features

zHigh reliability LED package.

z1.6mmX0.8mm SMT LED, 0.75mm thickness.

zLow power consumption.

zWide viewing angle.

zIdeal for backlight and indicator.

zVarious colors and lens types available.

zPackage: 2000pcs / reel .

zMoisture sensitivity level : level 3.

zRoHS compliant.

Description

The source color devices are made with InGaN Light Emit-

ting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Applications

zTraffic signaling.

zBacklighting (illuminated advertising , general lighting).

zInterior and exterior automotive lighting.

zSubstitution of micro incandescent lamps.

zReading lamps.

zSignal and symbol luminaire for orientation.

zMarker lights (e.g. Steps, exit ways, etc).

zDecorative and entertainment lighting.

zIndoor and outdoor commercial and residential

architectural lighting.

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 2 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613

Selection Guide

Part No. Dice Lens Type

Iv (mcd) [2]

@ 20mA

V

iewing

Angle [1]

Code. Min. Max. 2θ1/2

White (InGaN) Yellow Fluorescent

N 120 200

120°

P 200 300

Q 300 400

APT1608QWF/D-AMT

M 80 120

Electrical / Optical Characteristics at Ta=25°C

Absolute Maximum Ratings at Ta=25°C

Notes:

1. Rth(j-a) Results from mounting on PC board FR4 (pad size≥16 mm2 per pad),

2. 1/10 Duty Cycle, 0.1ms Pulse Width.

Parameter Symbol Value Unit

Power dissipation PD 80 mW

Reverse Voltage VR 5 V

Junction temperature TJ 110 °C

Operating Temperature Top -40 To +10 0 °C

Storage Temperature Ts tg -40 To +11 0 °C

DC Forward Current[1] IF 20 mA

Peak Forward Current [2] IFM 150 mA

Electrostatic Discharge Threshold (HBM) 250 V

Thermal Resistance (Junction/ambient) [1] Rth j-a 400 °C/W

Parameter Symbol Value Unit

Chromaticity coordinate X acc.to CIE1931

IF=20mA [Typ.] X [1] 0.31

Chromaticity coordinate Y acc.to CIE1931

IF=20mA [Typ.] Y [1] 0.31

Forward Voltage IF=20mA [Min.]

VF [2]

-

Forward Voltage IF=20mA [Typ.] 3.3

Forward Voltage IF=20mA [Max.] 4.0

Reverse Current (VR = 5V) [Max.] IR 50 uA

Temperature coefficient of VF

IF=20mA, -10 °C≤ T≤100 °C [Typ.] TCV -2.5 mV/°C

Temperature coefficient of X

IF=20mA, -10 °C≤ T≤100 °C [Typ.] TCX -0.1 10-3/°C

Temperature coefficient of Y

IF=20mA, -10 °C≤ T≤100 °C [Typ.] TCy -0.2 10-3/°C

V

Notes:

1.Measurement tolerance of the chromaticity coordinates is ± 0.01.

2. Forward Voltage: +/-0.1V.

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity/ luminous Flux: +/-15%.

SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 3 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613

White APT1608QWF/D-AMT

SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 4 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613

White APT1608QWF/D-AMT

0.20

0.25

0.30

0.35

0.40

0.20 0.25 0.30 0.35 0.40

x

y

a2

a0

b1

b2

c0

White CIE

x y x y x y

a2

0.263 0.213

a0

0.282 0.245

b2

0.298 0.271

0.282 0.245 0.298 0.271 0.313 0.296

0.265 0.265 0.286 0.299 0.306 0.332

0.242 0.226 0.265 0.265 0.286 0.299

b1

0.313 0.296

c0

0.329 0.325

0.329 0.325 0.358 0.372

0.329 0.371 0.363 0.400

0.306 0.332 0.329 0.371

Notes:

Shipment may contain more than one chromaticity regions.

Orders for single chromaticity region are generally not accepted.

Measurement tolerance of the chromaticity coordinates is ±0.01.

SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 5 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613

APT1608QWF/D-AMT

Recommended Soldering Pattern

(Units : mm; Tolerance: ± 0.1)

Tape Specifications

(Units : mm) Reel Dimension

Reflow soldering is recommended and the soldering profile is shown below.

Other soldering methods are not recommended as they might cause damage to the product.

SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 6 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613

PACKING & LABEL SPECIFICATIONS APT1608QWF/D-AMT

SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 7 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below

Lot Tolerance Percent Defective (LTPD) : 10%

No. Test Item Standards Test Condition Test Times /

Cycles

Number of

Damaged

1 Continuous operating test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22

2 High Temp. operating test EIAJ ED-

4701/100(101) Ta = 100°C IF = maximum rated current* 1,000 h 0 / 22

3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22

4 High temp. storage test EIAJ ED-

4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22

5 Low temp. storage test EIAJ ED-

4701/100(202) Ta = -40°C 1,000 h 0 / 22

6 High temp. & humidity storage test EIAJ ED-

4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22

7 High temp. & humidity operating test EIAJ ED-

4701/100(102)

Ta = 60°C, RH = 90%

IF = maximum rated current* 1,000 h 0 / 22

8 Soldering reliability test EIAJ ED-

4701/100(301)

Moisture soak : 30°C,70% RH, 72h

Preheat : 150~180°C(120s max.)

Soldering temp : 260°C(10s)

3 times 0 / 18

9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)

IF = derated current at 100°C 1,000 cycles 0 / 22

10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated

storage temperature(15min) 1,000 cycles 0 / 22

11 Electric Static Discharge (ESD) EIAJ ED-

4701/100(304) C = 100pF , R2 = 1.5KΩ V = 250V Once each

Polarity 0 / 22

12 Vibration test - a = 196m/s² , f = 100~2KHz ,

t = 48min for all xyz axes 4 times 0 / 22

* : Refer to forward current vs. derating curve diagram

Items Symbols Conditions Failure Criteria

luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5

Forward Voltage VF IF = 20mA Testing Max. Value ≥Spec.Max.Value x 1.2

Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥Spec.Max.Value x 2.5

High temp. storage test - - Occurrence of notable decoloration, deformation

and cracking

Failure Criteria