1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608QWF/D-AMT White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. Features It is recommended to use a wrist band or anti-electrostatic z High reliability LED package. glove when handling the LEDs. z 1.6mmX0.8mm SMT LED, 0.75mm thickness. All devices, equipment and machinery must be electrically z Low power consumption. grounded. z Wide viewing angle. Applications z Ideal for backlight and indicator. z Traffic signaling. z Various colors and lens types available. z Backlighting (illuminated advertising , general lighting). z Package: 2000pcs / reel . z Interior and exterior automotive lighting. z Moisture sensitivity level : level 3. z Substitution of micro incandescent lamps. z RoHS compliant. z Reading lamps. z Signal and symbol luminaire for orientation. z Marker lights (e.g. Steps, exit ways, etc). z Decorative and entertainment lighting. z Indoor and outdoor commercial and residential Package Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613 Selection Guide Part No. Dice APT1608QWF/D-AMT White (InGaN) Iv (mcd) [2] @ 20mA Lens Type Yellow Fluorescent Viewing Angle [1] Code. Min. Max. M 80 120 N 120 200 P 200 300 Q 300 400 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at Ta=25C Parameter Symbol Value Unit Power dissipation PD 80 mW Reverse Voltage VR 5 V Junction temperature TJ 110 C Operating Temperature Top -40 To +100 C Storage Temperature Tstg -40 To +110 C IF 20 mA IFM 150 mA 250 V 400 C/W DC Forward Current[1] Peak Forward Current [2] Electrostatic Discharge Threshold (HBM) Thermal Resistance (Junction/ambient) [1] Rth j-a Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at Ta=25C Parameter Symbol Value Chromaticity coordinate X acc.to CIE1931 IF=20mA [Typ.] X [1] 0.31 Chromaticity coordinate Y acc.to CIE1931 IF=20mA [Typ.] Y [1] 0.31 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Unit VF [2] 3.3 Forward Voltage IF=20mA [Max.] V 4.0 Reverse Current (VR = 5V) [Max.] IR 50 uA Temperature coefficient of VF IF=20mA, -10 C T100 C [Typ.] TCV -2.5 mV/ C Temperature coefficient of X IF=20mA, -10 C T100 C [Typ.] TCX -0.1 10-3/ C Temperature coefficient of Y IF=20mA, -10 C T100 C [Typ.] TCy -0.2 10-3/ C Notes: 1.Measurement tolerance of the chromaticity coordinates is 0.01. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613 White APT1608QWF/D-AMT SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613 White APT1608QWF/D-AMT White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is 0.01. SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613 APT1608QWF/D-AMT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613 PACKING & LABEL SPECIFICATIONS APT1608QWF/D-AMT SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Times / Number of Cycles Damaged Test Condition 1 Continuous operating test - Ta =25C ,IF = maximum rated current* 1,000 h 0 / 22 2 High Temp. operating test EIAJ ED4701/100(101) Ta = 100C IF = maximum rated current* 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJ EDTa = maximum rated storage temperature 4701/100(201) 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED4701/100(202) Ta = -40C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED4701/100(103) Ta = 60C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED4701/100(102) Ta = 60C, RH = 90% IF = maximum rated current* 1,000 h 0 / 22 8 Soldering reliability test EIAJ ED4701/100(301) Moisture soak : 30C,70% RH, 72h Preheat : 150~180C(120s max.) Soldering temp : 260C(10s) 3 times 0 / 18 9 Thermal shock operating test - Ta = -40C(15min) ~ 100C(15min) IF = derated current at 100C 1,000 cycles 0 / 22 10 Thermal shock test - Ta = -40C(15min) ~ maximum rated storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED4701/100(304) C = 100pF , R2 = 1.5K V = 250V Once each Polarity 0 / 22 12 Vibration test - a = 196m/s , f = 100~2KHz , t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking SPEC NO: DSAL3993 REV NO: V.1 DATE: NOV/22/2010 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP:1203011613