Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Long life, Downsized, 125℃
GPASeries
・Guaranteed short time at 150℃
・Downsized, low impedance and high-ripple current version of GXE
series
・Specified ESR after endurance test
・For high ripple current automotive applications.
(Direct fuel injection and electric power steering etc.)
・Endurance with ripple current : 3,000 to 5,000 hours at 125℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS2 Compliant
・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
◆SPECIFICATIONS
Items Characteristics
Category
Temperature Range -40 to +125℃
Rated Voltage Range 25 to 100Vdc
Capacitance Tolerance
±20% (M) (at 20℃, 120Hz)
Leakage Current I=0.03CV or 4µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute)
Dissipation Factor
(tanδ)
Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V
tanδ (Max.) 0.14 0.12 0.10 0.10 0.08 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V
Z(-25℃)/Z(+20℃) 222222
Z(-40℃)/Z(+20℃) 4 4 4 4 4 4 (at 120Hz)
Endurance 1
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple
current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125 ℃.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)≦300% of the initial specified value
Leakage current ≦The initial specified value
Endurance 2 The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage
is applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated
voltage) for 4,500 hours (2,500 hours for 25L and less) at 125℃.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)≦300% of the initial specified value
Leakage current ≦The initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)≦300% of the initial specified value
Leakage current ≦The initial specified value
◆DIMENSIONS [mm]
Sleeve (PET : Brown)
L' 15min. 4min.
φ
D'
φ
d
Vent
F±0.5
φD
φd
F
φD'
L'
12.5 14.5 16 18
0.6 0.8 0.8 0.8
5.0 7.5 7.5 7.5
φ
D+0.5max.
L+1.5max.
Gas escape end seal
Terminal Code : E
●
◆PART NUMBERING SYSTEM
Please refer to "Product code guide (radial lead type)"
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 470µF:471, 1,000µF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 50V:500)
Series code
Category
E G P A A A A EA A A A A A A A SM
8
1
15 16 17
14 18
11 12 13
5 6 7
2 3 4 9 10
Higher temperature
Downsized
Higher ripple current GPA
LXZ
GXE
CAT. No. E1001T
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
アルミ_英_05-2.indd 219 2019/04/02 15:38:19
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Long life, Downsized, 125℃
GPASeries
◆STANDARD RATINGS
WV
（Vdc）
Cap
（µF）
Case size
φD×L(mm) tanδ
ESR (Initial)
(Ω max./100kHz)
ESR (End of Life)
(Ω max./100kHz) Rated ripple current
(mArms/125℃,
100kHz)
Part No.
20℃-40℃20℃-40℃
25
1,200 12.5×20 0.14 0.044 0.22 0.18 2.2 1,820 EGPA250E□□122MK20S
1,500 14.5×20 0.14 0.037 0.19 0.11 1.3 2,100 EGPA250E□□152MU20S
1,800 12.5×25 0.14 0.033 0.17 0.13 1.6 2,400 EGPA250E□□182MK25S
1,800 16×20 0.14 0.034 0.17 0.10 1.3 2,280 EGPA250E□□182ML20S
2,200 12.5×30 0.16 0.029 0.13 0.11 1.3 2,560 EGPA250E□□222MK30S
2,200 14.5×25 0.16 0.028 0.14 0.080 0.90 2,800 EGPA250E□□222MU25S
2,700 12.5×35 0.16 0.024 0.11 0.090 0.80 2,970 EGPA250E□□272MK35S
2,700 14.5×30 0.16 0.023 0.10 0.070 0.70 3,060 EGPA250E□□272MU30S
2,700 16×25 0.16 0.026 0.13 0.080 1.1 3,100 EGPA250E□□272ML25S
2,700 18×20 0.16 0.032 0.16 0.090 0.60 2,490 EGPA250E□□272MM20S
3,300 12.5×40 0.18 0.021 0.095 0.080 0.50 3,600 EGPA250E□□332MK40S
3,300 14.5×35 0.18 0.021 0.095 0.060 0.70 3,380 EGPA250E□□332MU35S
3,300 16×30 0.18 0.023 0.10 0.070 0.90 3,160 EGPA250E□□332ML30S
3,900 16×35 0.18 0.020 0.090 0.060 0.70 3,590 EGPA250E□□392ML35S
3,900 18×25 0.18 0.024 0.12 0.070 0.50 3,200 EGPA250E□□392MM25S
4,700 14.5×40 0.20 0.018 0.081 0.050 0.50 4,000 EGPA250E□□472MU40S
4,700 18×30 0.20 0.022 0.099 0.080 0.60 3,390 EGPA250E□□472MM30S
5,600 16×40 0.22 0.017 0.077 0.040 0.60 4,300 EGPA250E□□562ML40S
5,600 18×35 0.22 0.019 0.086 0.070 0.50 4,200 EGPA250E□□562MM35S
6,800 18×40 0.24 0.016 0.072 0.030 0.40 4,600 EGPA250E□□682MM40S
35
680 12.5×20 0.12 0.044 0.22 0.18 2.2 1,820 EGPA350E□□681MK20S
1,000 12.5×25 0.12 0.033 0.17 0.13 1.6 2,400 EGPA350E□□102MK25S
1,000 14.5×20 0.12 0.037 0.19 0.11 1.3 2,100 EGPA350E□□102MU20S
1,200 12.5×30 0.12 0.029 0.13 0.11 1.3 2,560 EGPA350E□□122MK30S
1,200 14.5×25 0.12 0.028 0.14 0.080 0.90 2,800 EGPA350E□□122MU25S
1,200 16×20 0.12 0.034 0.17 0.10 1.3 2,280 EGPA350E□□122ML20S
1,500 12.5×35 0.12 0.024 0.11 0.090 0.80 2,970 EGPA350E□□152MK35S
1,500 14.5×30 0.12 0.023 0.10 0.070 0.70 3,060 EGPA350E□□152MU30S
1,500 18×20 0.12 0.032 0.16 0.090 0.60 2,490 EGPA350E□□152MM20S
1,800 12.5×40 0.12 0.021 0.095 0.080 0.50 3,600 EGPA350E□□182MK40S
1,800 16×25 0.12 0.026 0.13 0.080 1.1 3,100 EGPA350E□□182ML25S
2,200 14.5×35 0.14 0.021 0.095 0.060 0.70 3,380 EGPA350E□□222MU35S
2,200 16×30 0.14 0.023 0.10 0.070 0.90 3,160 EGPA350E□□222ML30S
2,200 18×25 0.14 0.024 0.12 0.070 0.50 3,200 EGPA350E□□222MM25S
2,700 14.5×40 0.14 0.018 0.081 0.050 0.50 4,000 EGPA350E□□272MU40S
2,700 16×35 0.14 0.020 0.090 0.060 0.70 3,590 EGPA350E□□272ML35S
2,700 18×30 0.14 0.022 0.099 0.080 0.60 3,390 EGPA350E□□272MM30S
3,300 16×40 0.16 0.017 0.077 0.040 0.60 4,300 EGPA350E□□332ML40S
3,300 18×35 0.16 0.019 0.086 0.070 0.50 4,200 EGPA350E□□332MM35S
4,700 18×40 0.18 0.016 0.072 0.030 0.40 4,600 EGPA350E□□472MM40S
50
470 12.5×20 0.10 0.065 0.33 0.18 2.2 1,500 EGPA500E□□471MK20S
560 14.5×20 0.10 0.055 0.28 0.11 1.3 1,740 EGPA500E□□561MU20S
680 12.5×25 0.10 0.048 0.24 0.13 1.6 1,900 EGPA500E□□681MK25S
680 16×20 0.10 0.043 0.22 0.10 1.3 2,040 EGPA500E□□681ML20S
820 12.5×30 0.10 0.041 0.18 0.11 1.3 2,150 EGPA500E□□821MK30S
820 14.5×25 0.10 0.040 0.20 0.080 0.90 2,190 EGPA500E□□821MU25S
1,000 12.5×35 0.10 0.034 0.15 0.090 0.80 2,510 EGPA500E□□102MK35S
1,000 14.5×30 0.10 0.036 0.16 0.070 0.70 2,470 EGPA500E□□102MU30S
1,000 16×25 0.10 0.031 0.16 0.080 1.1 2,620 EGPA500E□□102ML25S
1,000 18×20 0.10 0.039 0.20 0.090 0.60 2,240 EGPA500E□□102MM20S
1,200 12.5×40 0.10 0.028 0.13 0.080 0.50 2,870 EGPA500E□□122MK40S
1,200 14.5×35 0.10 0.029 0.13 0.060 0.70 2,840 EGPA500E□□122MU35S
1,200 16×30 0.10 0.027 0.13 0.070 0.90 2,940 EGPA500E□□122ML30S
1,200 18×25 0.10 0.029 0.15 0.070 0.50 2,750 EGPA500E□□122MM25S
1,500 16×35 0.10 0.023 0.10 0.060 0.70 3,300 EGPA500E□□152ML35S
1,800 14.5×40 0.10 0.024 0.11 0.050 0.50 3,230 EGPA500E□□182MU40S
1,800 18×30 0.10 0.026 0.12 0.080 0.60 3,140 EGPA500E□□182MM30S
2,200 16×40 0.12 0.020 0.090 0.040 0.60 3,720 EGPA500E□□222ML40S
2,200 18×35 0.12 0.022 0.10 0.070 0.50 3,510 EGPA500E□□222MM35S
2,700 18×40 0.12 0.018 0.080 0.030 0.40 3,940 EGPA500E□□272MM40S
□□ : Enter the appropriate lead forming or taping code.
CAT. No. E1001T
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
アルミ_英_05-2.indd 220 2019/04/02 15:38:20
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Long life, Downsized, 125℃
GPASeries
◆STANDARD RATINGS
WV
（Vdc）
Cap
（µF）
Case size
φD×L(mm) tanδ
ESR (Initial)
(Ω max./100kHz)
ESR (End of Life)
(Ω max./100kHz) Rated ripple current
(mArms/125℃,100kHz) Part No.
20℃-40℃20℃-40℃
63
470 16×20 0.10 0.085 0.58 0.19 3.0 1,790 EGPA630E□□471ML20S
680 16×25 0.10 0.061 0.48 0.14 2.0 2,030 EGPA630E□□681ML25S
680 18×20 0.10 0.070 0.49 0.19 3.0 1,910 EGPA630E□□681MM20S
820 16×30 0.10 0.053 0.41 0.090 1.3 2,330 EGPA630E□□821ML30S
1,000 16×35 0.10 0.044 0.33 0.070 0.90 2,580 EGPA630E□□102ML35S
1,000 18×25 0.10 0.049 0.34 0.14 2.0 2,280 EGPA630E□□102MM25S
1,200 16×40 0.10 0.036 0.26 0.060 0.80 2,900 EGPA630E□□122ML40S
1,200 18×30 0.10 0.041 0.26 0.090 1.3 2,580 EGPA630E□□122MM30S
1,500 18×35 0.10 0.035 0.21 0.070 0.90 2,890 EGPA630E□□152MM35S
1,800 18×40 0.10 0.030 0.18 0.060 0.80 3,210 EGPA630E□□182MM40S
80
330 16×20 0.08 0.085 0.58 0.19 3.0 1,790 EGPA800E□□331ML20S
470 16×25 0.08 0.061 0.48 0.14 2.0 2,030 EGPA800E□□471ML25S
470 18×20 0.08 0.070 0.49 0.19 3.0 1,910 EGPA800E□□471MM20S
560 16×30 0.08 0.053 0.41 0.090 1.3 2,330 EGPA800E□□561ML30S
560 18×25 0.08 0.049 0.34 0.14 2.0 2,280 EGPA800E□□561MM25S
680 16×35 0.08 0.044 0.33 0.070 0.90 2,580 EGPA800E□□681ML35S
680 18×30 0.08 0.041 0.26 0.090 1.3 2,580 EGPA800E□□681MM30S
820 16×40 0.08 0.036 0.26 0.060 0.80 2,900 EGPA800E□□821ML40S
820 18×35 0.08 0.035 0.21 0.070 0.90 2,890 EGPA800E□□821MM35S
1,200 18×40 0.08 0.030 0.18 0.060 0.80 3,210 EGPA800E□□122MM40S
100
200 16×20 0.08 0.11 0.88 0.25 3.9 1,580 EGPA101E□□201ML20S
270 18×20 0.08 0.091 0.73 0.22 3.9 1,690 EGPA101E□□271MM20S
300 16×25 0.08 0.079 0.72 0.18 2.7 1,990 EGPA101E□□301ML25S
360 16×30 0.08 0.068 0.62 0.13 1.9 2,250 EGPA101E□□361ML30S
390 18×25 0.08 0.064 0.50 0.15 2.7 2,110 EGPA101E□□391MM25S
470 16×35 0.08 0.056 0.50 0.090 1.3 2,500 EGPA101E□□471ML35S
510 18×30 0.08 0.054 0.39 0.13 1.9 2,410 EGPA101E□□511MM30S
560 16×40 0.08 0.046 0.39 0.080 1.1 2,700 EGPA101E□□561ML40S
620 18×35 0.08 0.044 0.32 0.090 1.3 2,690 EGPA101E□□621MM35S
750 18×40 0.08 0.039 0.27 0.080 1.1 2,880 EGPA101E□□751MM40S
□□ : Enter the appropriate lead forming or taping code.
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz)
Capacitance(µF)
120 1k 10k 100k
200 0.40 0.82 0.93 1.00
270 to 560 0.50 0.85 0.94 1.00
620 to 1,800 0.60 0.87 0.95 1.00
2,200 to 3,900 0.75 0.90 0.95 1.00
4,700 to 6,800 0.85 0.95 0.98 1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Please contact us for lifetime estimation.
CAT. No. E1001T
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
アルミ_英_05-2.indd 221 2019/04/02 15:38:20
