04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
General Purpose Relays
PCB Relays
n 10A switching capacity
n UL Class F coil insulation system standard
n 1 form A (NO) and 1 form C (CO) contact arrangement
n Flux proof, wash tight plastic sealed case available
Typical applications
Appliances, HVAC, office machines
Approvals
UL E29244
Technical data of approved types on request
Contact Data
Contact arrangement 1 form A (NO)
Rated voltage 120VAC, 24VDC
Max. switching voltage 120VAC, 28VDC
Rated current 10A
Contact material AgCdO
Min. recommended contact load 100mA at 5VDC
Frequency of operation 1800 ops./h
Operate/release time max. 10/5ms
Electrical endurance
10A, 120VAC resistive 100x103 ops.
6A, 24VDC resistive 100x103 ops.
Contact ratings 10A, 120VAC resistive
6A, 24VDC resistive
3/4HP, 240VAC
Mechanical endurance, DC coil 10x106 operations
Coil Data
Coil voltage range 3 to 48VDC
Operative range, IEC 61810 2
Coil insulation system according UL Class F
Coil Data (continued)
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
003 3 1.95 0.15 20 450
005 5 3.25 0.25 55.5 450
006 6 3.9 0.3 80 450
009 9 5.85 0.45 180 450
012 12 7.8 0.6 320 450
018 18 11.7 0.9 720 450
024 24 15.6 1.2 1280 450
048 48 31.2 2.4 3491 660
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 750Vrms
between contact and coil 2000Vrms
Clearance/creepage
between contact and coil >1.6/3.2mm
Miniature PCB Relay T73
430 Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
P&B
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Features
• 10 amp switching capacity.
• UL Class F (155°C) coil insulation system standard.
• 1 Form A and 1 Form C contact arrangements.
• Ideal for domestic appliances, HVAC and security.
• Resists high temperature and various chemical solutions.
• Immersion cleanable, plastic sealed case available.
Coil Data @ 20°C
Voltage: 3 to 48VDC.
Nominal Power: 450 milliwatts.
660 milliwatts for 48VDC coil.
Coil Temperature Rise: 35C° max, at rated coil voltage.
Max. Coil Power: 130% of nominal.
Duty Cycle: Continuous.
T73 series
Low Profile, 10 Amp
Printed Circuit
Board Relay
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings):
Weight: 0.42 oz. (12g).
File E29244
File LR48471
Initial Insulation Resistance
Between Mutually Insulated Elements: 108ohms min. @ 500VDC.
Ag contact rating.
Initial Dielectric Strength
Between Open Contacts: 750VAC 50/60 Hz. (1 minute).
Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute).
Operate Data @ 20°C
Operate Time: 10 ms (excluding bounce).
Release Time: 5 ms (excluding bounce).
Environmental Data
Temperature Range:
Storage: -40°C to +130°C.
Operating: -30°C to +80°C.
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Operational: 10 to 55 Hz., 1.5mm double amplitude.
Shock, Mechanical: 100g min.
Operational: 10g min.
Operating Humidity: 45 to 85% RH.
Coil Data @ 20°C
Rated Coil Coil Must Operate Must Release
Voltage Resistance Voltage Voltage
(VDC) (Ohms) +10% (VDC) (VDC)
3 20 1.95 0.15
5 56 3.25 0.25
6 80 3.90 0.30
9 180 5.85 0.45
12 320 7.80 0.60
18 720 11.7 0.90
24 1,150 15.6 1.20
48 3,500 31.2 2.40
Contact Data @ 20°C
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver-cadmium oxide.
Max. Switching Rate: 240 ops./min. (no load).
30 ops./min. (rated load).
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: 100,000 operations.
Minimum Load: 10mA @ 5VDC
Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC.
Contact Ratings @ 20°C with relay properly vented. Remove vent
nib after soldering and cleaning.
Contact Typical Ratings Type Operations
Arrang.
1 & 5 1/3HP NO @ 240VAC Motor 30,000
10A NO @ 120VAC Resistive 100,000
6A NO @ 120VAC Resistive 100,000
6A NO @ 24VDC Resistive 100,000
10A/5A @ 120VAC Resistive 100,000
1/4HP NO @ 120VAC Motor
Consult factory for other ratings.
Figure 1 - Coil Temperature Rise Operate Time Life Expectancy
12
10
8
6
4
2
0.2 0.3 0.4 0.5 0.6 0.7 0.8
0.2 0.3 0.4 0.5 0.6 0.7 0.8
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (Deg.)
Release Time
Operate Time
100
2
Contact Current (A)
Operation (x 104)
10
1
46810 12
0
120VAC Resistive
28VDC Resistive
Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Coil temperature riseOperate time
430 Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
P&B
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Features
• 10 amp switching capacity.
• UL Class F (155°C) coil insulation system standard.
• 1 Form A and 1 Form C contact arrangements.
• Ideal for domestic appliances, HVAC and security.
• Resists high temperature and various chemical solutions.
• Immersion cleanable, plastic sealed case available.
Coil Data @ 20°C
Voltage: 3 to 48VDC.
Nominal Power: 450 milliwatts.
660 milliwatts for 48VDC coil.
Coil Temperature Rise: 35C° max, at rated coil voltage.
Max. Coil Power: 130% of nominal.
Duty Cycle: Continuous.
T73 series
Low Profile, 10 Amp
Printed Circuit
Board Relay
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings):
Weight: 0.42 oz. (12g).
File E29244
File LR48471
Initial Insulation Resistance
Between Mutually Insulated Elements: 108ohms min. @ 500VDC.
Ag contact rating.
Initial Dielectric Strength
Between Open Contacts: 750VAC 50/60 Hz. (1 minute).
Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute).
Operate Data @ 20°C
Operate Time: 10 ms (excluding bounce).
Release Time: 5 ms (excluding bounce).
Environmental Data
Temperature Range:
Storage: -40°C to +130°C.
Operating: -30°C to +80°C.
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Operational: 10 to 55 Hz., 1.5mm double amplitude.
Shock, Mechanical: 100g min.
Operational: 10g min.
Operating Humidity: 45 to 85% RH.
Coil Data @ 20°C
Rated Coil Coil Must Operate Must Release
Voltage Resistance Voltage Voltage
(VDC) (Ohms) +10% (VDC) (VDC)
3 20 1.95 0.15
5 56 3.25 0.25
6 80 3.90 0.30
9 180 5.85 0.45
12 320 7.80 0.60
18 720 11.7 0.90
24 1,150 15.6 1.20
48 3,500 31.2 2.40
Contact Data @ 20°C
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver-cadmium oxide.
Max. Switching Rate: 240 ops./min. (no load).
30 ops./min. (rated load).
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: 100,000 operations.
Minimum Load: 10mA @ 5VDC
Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC.
Contact Ratings @ 20°C with relay properly vented. Remove vent
nib after soldering and cleaning.
Contact Typical Ratings Type Operations
Arrang.
1 & 5 1/3HP NO @ 240VAC Motor 30,000
10A NO @ 120VAC Resistive 100,000
6A NO @ 120VAC Resistive 100,000
6A NO @ 24VDC Resistive 100,000
10A/5A @ 120VAC Resistive 100,000
1/4HP NO @ 120VAC Motor
Consult factory for other ratings.
Figure 1 - Coil Temperature Rise Operate Time Life Expectancy
12
10
8
6
4
2
0.2 0.3 0.4 0.5 0.6 0.7 0.8
0.2 0.3 0.4 0.5 0.6 0.7 0.8
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (Deg.)
Release Time
Operate Time
100
2
Contact Current (A)
Operation (x 104)
10
1
46810 12
0
120VAC Resistive
28VDC Resistive
Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
430 Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
P&B
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Features
• 10 amp switching capacity.
• UL Class F (155°C) coil insulation system standard.
• 1 Form A and 1 Form C contact arrangements.
• Ideal for domestic appliances, HVAC and security.
• Resists high temperature and various chemical solutions.
• Immersion cleanable, plastic sealed case available.
Coil Data @ 20°C
Voltage: 3 to 48VDC.
Nominal Power: 450 milliwatts.
660 milliwatts for 48VDC coil.
Coil Temperature Rise: 35C° max, at rated coil voltage.
Max. Coil Power: 130% of nominal.
Duty Cycle: Continuous.
T73 series
Low Profile, 10 Amp
Printed Circuit
Board Relay
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings):
Weight: 0.42 oz. (12g).
File E29244
File LR48471
Initial Insulation Resistance
Between Mutually Insulated Elements: 108ohms min. @ 500VDC.
Ag contact rating.
Initial Dielectric Strength
Between Open Contacts: 750VAC 50/60 Hz. (1 minute).
Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute).
Operate Data @ 20°C
Operate Time: 10 ms (excluding bounce).
Release Time: 5 ms (excluding bounce).
Environmental Data
Temperature Range:
Storage: -40°C to +130°C.
Operating: -30°C to +80°C.
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Operational: 10 to 55 Hz., 1.5mm double amplitude.
Shock, Mechanical: 100g min.
Operational: 10g min.
Operating Humidity: 45 to 85% RH.
Coil Data @ 20°C
Rated Coil Coil Must Operate Must Release
Voltage Resistance Voltage Voltage
(VDC) (Ohms) +10% (VDC) (VDC)
3 20 1.95 0.15
5 56 3.25 0.25
6 80 3.90 0.30
9 180 5.85 0.45
12 320 7.80 0.60
18 720 11.7 0.90
24 1,150 15.6 1.20
48 3,500 31.2 2.40
Contact Data @ 20°C
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver-cadmium oxide.
Max. Switching Rate: 240 ops./min. (no load).
30 ops./min. (rated load).
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: 100,000 operations.
Minimum Load: 10mA @ 5VDC
Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC.
Contact Ratings @ 20°C with relay properly vented. Remove vent
nib after soldering and cleaning.
Contact Typical Ratings Type Operations
Arrang.
1 & 5 1/3HP NO @ 240VAC Motor 30,000
10A NO @ 120VAC Resistive 100,000
6A NO @ 120VAC Resistive 100,000
6A NO @ 24VDC Resistive 100,000
10A/5A @ 120VAC Resistive 100,000
1/4HP NO @ 120VAC Motor
Consult factory for other ratings.
Figure 1 - Coil Temperature Rise Operate Time Life Expectancy
12
10
8
6
4
2
0.2 0.3 0.4 0.5 0.6 0.7 0.8
0.2 0.3 0.4 0.5 0.6 0.7 0.8
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (Deg.)
Release Time
Operate Time
100
2
Contact Current (A)
Operation (x 104)
10
1
46810 12
0
120VAC Resistive
28VDC Resistive
Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Electrical endurance
Note: Graphical data should not be used as a substitute for specific application verification.
To be used for estimates only.
U
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
Potter & Brumfield
General Purpose Relays
PCB Relays
Miniature PCB Relay T73 (Continued)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -30°C to +80°C
Category of environmental protection
IEC 61810 RTII - flux proof
RTIII - wash tight
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Weight 12g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tube/20 pcs., carton box/1000 pcs.
431
Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change. www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
Ordering Information
Typical Part Number B T73 S 5 D 1 5 -24
1. Basic Series:
T73 = Miniature, printed circuit board relay.
2. Enclosure:
V = Vented (Flux-tight)*
S = Immersion cleanable, plastic sealed case.
3. Contact Arrangement:
1 = 1 Form A (SPST-NO).
5 = 1 Form C (SPDT)
4. Coil Input:
D = DC voltage.
5. Relay Type:
1 = Standard coil.
6. Contact Material:
5 = Silver-Cadmium Oxide
7. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC
05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC
* Not suitable for immersion cleaning process.
T73S5D15-05
T73S5D15-12
T73S5D15-24
Outline Dimensions
.610
(15.5)
.877
(22.3) .693
(17.6)
.122
(3.1)
.067
(1.7) 0.30
(7.62
1 Form A
Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views)
1 Form A
.300
(7.62)
.200
(5.08)
.700
(17.8)
2 x .051 DIA.
(1.3)
2 x .039 DIA.
(1.0)
2
3 4 5
1 Form C 1 Form C
.300
(7.62)
.200
(5.08)
.700
(17.8)
3 x .051 DIA.
(1.3)
.500
(12.7)
2 x .039 DIA.
(1.0)
2
3 4 5
1
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Terminal assignment
Bottom view on solder pins
431
Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change. www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
Ordering Information
Typical Part Number B T73 S 5 D 1 5 -24
1. Basic Series:
T73 = Miniature, printed circuit board relay.
2. Enclosure:
V = Vented (Flux-tight)*
S = Immersion cleanable, plastic sealed case.
3. Contact Arrangement:
1 = 1 Form A (SPST-NO).
5 = 1 Form C (SPDT)
4. Coil Input:
D = DC voltage.
5. Relay Type:
1 = Standard coil.
6. Contact Material:
5 = Silver-Cadmium Oxide
7. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC
05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC
* Not suitable for immersion cleaning process.
T73S5D15-05
T73S5D15-12
T73S5D15-24
Outline Dimensions
.610
(15.5)
.877
(22.3) .693
(17.6)
.122
(3.1)
.067
(1.7) 0.30
(7.62
1 Form A
Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views)
1 Form A
.300
(7.62)
.200
(5.08)
.700
(17.8)
2 x .051 DIA.
(1.3)
2 x .039 DIA.
(1.0)
2
3 4 5
1 Form C 1 Form C
.300
(7.62)
.200
(5.08)
.700
(17.8)
3 x .051 DIA.
(1.3)
.500
(12.7)
2 x .039 DIA.
(1.0)
2
3 4 5
1
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
DimensionsPCB layout
Bottom view on solder pins
431
Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change. www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
Ordering Information
Typical Part Number B T73 S 5 D 1 5 -24
1. Basic Series:
T73 = Miniature, printed circuit board relay.
2. Enclosure:
V = Vented (Flux-tight)*
S = Immersion cleanable, plastic sealed case.
3. Contact Arrangement:
1 = 1 Form A (SPST-NO).
5 = 1 Form C (SPDT)
4. Coil Input:
D = DC voltage.
5. Relay Type:
1 = Standard coil.
6. Contact Material:
5 = Silver-Cadmium Oxide
7. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC
05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC
* Not suitable for immersion cleaning process.
T73S5D15-05
T73S5D15-12
T73S5D15-24
Outline Dimensions
.610
(15.5)
.877
(22.3) .693
(17.6)
.122
(3.1)
.067
(1.7) 0.30
(7.62
1 Form A
Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views)
1 Form A
.300
(7.62)
.200
(5.08)
.700
(17.8)
2 x .051 DIA.
(1.3)
2 x .039 DIA.
(1.0)
2
3 4 5
1 Form C 1 Form C
.300
(7.62)
.200
(5.08)
.700
(17.8)
3 x .051 DIA.
(1.3)
.500
(12.7)
2 x .039 DIA.
(1.0)
2
3 4 5
1
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
1 form A (NO)
1 form C (CO)
1 form A (NO)
431
Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change. www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
Ordering Information
Typical Part Number B T73 S 5 D 1 5 -24
1. Basic Series:
T73 = Miniature, printed circuit board relay.
2. Enclosure:
V = Vented (Flux-tight)*
S = Immersion cleanable, plastic sealed case.
3. Contact Arrangement:
1 = 1 Form A (SPST-NO).
5 = 1 Form C (SPDT)
4. Coil Input:
D = DC voltage.
5. Relay Type:
1 = Standard coil.
6. Contact Material:
5 = Silver-Cadmium Oxide
7. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC
05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC
* Not suitable for immersion cleaning process.
T73S5D15-05
T73S5D15-12
T73S5D15-24
Outline Dimensions
.610
(15.5)
.877
(22.3) .693
(17.6)
.122
(3.1)
.067
(1.7) 0.30
(7.62
1 Form A
Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views)
1 Form A
.300
(7.62)
.200
(5.08)
.700
(17.8)
2 x .051 DIA.
(1.3)
2 x .039 DIA.
(1.0)
2
3 4 5
1 Form C 1 Form C
.300
(7.62)
.200
(5.08)
.700
(17.8)
3 x .051 DIA.
(1.3)
.500
(12.7)
2 x .039 DIA.
(1.0)
2
3 4 5
1
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
431
Dimensions are shown for
reference purposes only. Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change. www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03
Ordering Information
Typical Part Number B T73 S 5 D 1 5 -24
1. Basic Series:
T73 = Miniature, printed circuit board relay.
2. Enclosure:
V = Vented (Flux-tight)*
S = Immersion cleanable, plastic sealed case.
3. Contact Arrangement:
1 = 1 Form A (SPST-NO).
5 = 1 Form C (SPDT)
4. Coil Input:
D = DC voltage.
5. Relay Type:
1 = Standard coil.
6. Contact Material:
5 = Silver-Cadmium Oxide
7. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC
05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC
* Not suitable for immersion cleaning process.
T73S5D15-05
T73S5D15-12
T73S5D15-24
Outline Dimensions
.610
(15.5)
.877
(22.3) .693
(17.6)
.122
(3.1)
.067
(1.7) 0.30
(7.62
1 Form A
Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views)
1 Form A
.300
(7.62)
.200
(5.08)
.700
(17.8)
2 x .051 DIA.
(1.3)
2 x .039 DIA.
(1.0)
2
3 4 5
1 Form C 1 Form C
.300
(7.62)
.200
(5.08)
.700
(17.8)
3 x .051 DIA.
(1.3)
.500
(12.7)
2 x .039 DIA.
(1.0)
2
3 4 5
1
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Product code structure Typical product code T73 S 5 D 1 5 -24
Basic type
T73 Miniature PCB Relay T73
Category of protection
V Flux proof
S Wash tight, immersion cleanable, plastic sealed case
Contact arrangement
1 1 form A (NO) contact 5 1 form C (CO) contact
Coil input
D DC coil
Relay type
1 Standard coil
Contact material
5 AgCdO
Coil voltage
Coil code: please refer to coil versions table (e.g. 05=5VDC)
Other types on request
Product code Enclosure Arrangement Coil Cont.material Coil voltage Part number
T73S1D15-12 Wash tight 1 form A (NO) DC coil AgCdO 12VDC 1-1393197-1
T73S5D15-05 1 form C (CO) 5VDC 2-1393197-9
T73S5D15-12 12VDC 3-1393197-2
T73S5D15-24 24VDC 3-1393197-4
1 form C (CO)
