MASWSS0143SMB - M/A-Com Technology Solutions

3 Watt Cellular T/R and Antenna Changeover Switch

DC - 3.0 GHz

Rev. V5

MASWSS0143

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 Low Insertion Loss: < 0.4 dB @ 1900 MHz

 Low Current Consumption: <20 µA @ +5V

 High Intercept Point: 58 dBm @ 1 GHz

 Positive or Negative Voltage Control

 CDMA, W-CDMA, TDMA, GSM, PCS and DCS

 Lead-Free Plastic SOT-26 Package

 Halogen-Free “Green” Mold Compound

 260°C Reflow Compatible

 RoHS* Compliant Version of SW-425

Description

The MASWSS0143 is a GaAs monolithic switch in a

lead-free, SOT-26 surface mount plastic package.

This device is ideally suited for applications

where very low power consumption, low

intermodulation products and very small size are

required.

Typical applications include internal / external

antenna select switch for portable telephones and

data radios. In addition because of its low loss, good

isolation, and inherent speed, the MASWSS0143

can be used as a conventional T/R switch or as an

antenna diversity switch.

The MASWSS0143 can be used in power

applications up to 3 watts in systems such as cellular

PCS, CDMA, W-CDMA, TDMA, GSM and other

analog / digital wireless communications systems.

The MASWSS0143 is fabricated using a 0.5 micron

gate length GaAs pHEMT process. The process

features full chip passivation for increased

performance and reliability.

Ordering Information 1

Part Number Package

MASWSS0143 Bulk Packaging

MASWSS0143TR 1000 piece reel

MASWSS0143TR-3000 3000 piece reel

1. Reference Application Note M513 for reel size information.

Pin Configuration

Pin No. Function Description

1 RF1 RF In/Out

2 GND RF Ground

3 RF2 RF In/Out

4 VB Voltage Control B

5 RFC RF Common

6 VA Voltage Control A

Functional Block Diagram

VA RFC VB

RF1 GND RF2

Pin 1

39 pF 39 pF

39 pF

Absolute Maximum Ratings 2,3

Parameter Absolute Maximum

Input Power (1 GHz)

5 V Control

+36 dBm

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. M/A-COM Technology does not recommend sustained

operation near these survivability limits.

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

3 Watt Cellular T/R and Antenna Changeover Switch

DC - 3.0 GHz

Rev. V5

MASWSS0143

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Electrical Specifications: TA = 25°C, VCTL = 0/5 V, PIN = 30 dBm, Z0 = 50 Ω4

Truth Table 5,6

Control A Control B RFC - RF1 RFC - RF2

0 1 Off On

1 0 On Off

5. Differential voltage, V (state 1) - V (state 0), must be +2.5 V

minimum and must not exceed 8 V.

6. 0 = -8 V to 0 V, 1 = -5.5 V to 8.0 V

Parameters Test Conditions Units Min. Typ. Max.

Insertion Loss

DC - 1 GHz

1 - 2 GHz

2 - 3 GHz

—

0.35

0.40

0.65

0.50

—

Isolation

DC - 1 GHz

1 - 2 GHz

2 - 3 GHz

—

VSWR DC - 3 GHz Ratio — 1.2:1 —

P1dB 1 GHz dBm — 36 —

IP2 2-Tone, 5 MHz Spacing, 1 GHz

Pin = +10 dBm / Tone dBm — 110 —

IP3 2-Tone, 5 MHz Spacing, 1 GHz

Pin = +10 dBm / Tone dBm — 58 —

2nd Harmonics Pin = +30 dBm, f0 = 1 GHz dBc — -78 —

3rd Harmonics Pin = +30 dBm, f0 = 1 GHz dBc — -82 -70

Trise, Tfall 10% to 90% RF, 90% to 10% RF ns — 20 —

Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns — 60 —

Transients mV — 20 —

Control Current VCTL = 5 V mA — 5 20

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

4. For positive voltage control, external DC blocking capacitors are required on all RF ports.

Lead-Free SOT-26†

† Reference Application Note M538 for lead-free solder reflow

recommendations.

Plating is 100% matte tin over copper.

3 Watt Cellular T/R and Antenna Changeover Switch

DC - 3.0 GHz

Rev. V5

MASWSS0143

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Insertion Loss, 1000 pF Insertion Loss, 39 pF

Typical Performance Curves

Isolation, 1000 pF Isolation, 39 pF

VSWR, 1000 pF VSWR, 39 pF

0.0

0.2

0.4

0.6

0.8

0.5 1.0 1.5 2.0 2.5 3.0

25°C

-40°C

85°C

Frequency (GHz)

0.0

0.2

0.4

0.6

0.8

100 300 500 700 900

25°C

-40°C

85°C

Frequency (MHz)

100 300 500 700 900

25°C

-40°C

85°C

Frequency (MHz)

0.5 1.0 1.5 2.0 2.5 3.0

25°C

-40°C

85°C

Frequency (GHz)

1.0

1.1

1.2

1.3

1.4

1.5

100 300 500 700 900

25°C

-40°C

85°C

Frequency (MHz)

1.0

1.1

1.2

1.3

1.4

1.5

0.5 1.0 1.5 2.0 2.5 3.0

25°C

-40°C

85°C

Frequency (GHz)

3 Watt Cellular T/R and Antenna Changeover Switch

DC - 3.0 GHz

Rev. V5

MASWSS0143

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.