INDUSTRIAL TEMPERATURE RANGE
IDT74LVC16245A
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
1JULY 2015INDUSTRIAL TEMPERATURE RANGE
IDT and the IDT logo is a registered trademark of Integrated Device Technology, Inc.
© 2015 Integrated Device Technology, Inc. DSC-4736/6
FEATURES:
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
•VCC = 3.3V ± 0.3V, Normal Range
•VCC = 2.7V to 3.6V, Extended Range
• CMOS power levels (0.4μμ
μμ
μ W typ. static)
• All inputs, outputs, and I/O are 5V tolerant
• Supports hot insertion
• Available in SSOP and TSSOP packages
FUNCTIONAL BLOCK DIAGRAM
APPLICATIONS:
• 5V and 3.3V mixed voltage systems
• Data communication and telecommunication systems
DRIVE FEATURES:
• High Output Drivers: ±24mA
• Reduced system switching noise
3.3V CMOS 16-BIT
BUS TRANSCEIVER
WITH 3-STATE OUTPUTS,
5 VOLT TOLERANT I/O
IDT74LVC16245A
DESCRIPTION:
This 16-bit bus transceiver is built using advanced dual metal CMOS
technology. This high-speed, low power transceiver is ideal for asynchro-
nous communication between two busses (A and B). The Direction and
Output Enable controls are designed to operate this device as either two
independent 8-bit transceivers or one 16-bit transceiver. The direction
control pin (DIR) controls the direction of data flow. The output enable pin
(OE) overrides the direction control and disables both ports. All inputs are
designed with hysteresis for improved noise margin.
All pins can be driven from either 3.3V or 5V devices. This feature allows
the use of this device as a translator in a mixed 3.3V/5V supply system.
The LVC16245A has been designed with a ±24mA output driver. This
driver is capable of driving a moderate to heavy load while maintaining
speed performance.
1DIR
1A1
1A2
1A3
1A4
1A5
1A6
1A7
1A8
1B8
1B7
1B6
1B5
1B4
1B3
1B2
1B1
1OE
2DIR
2A1
2A2
2A3
2A4
2A5
2A6
2A7
2A8
2B8
2B7
2B6
2B5
2B4
2B3
2B2
2B1
2OE
1
47
46
44
43
41
40
38
37
48
2
3
5
6
8
9
11
12
24
36
35
33
32
30
29
27
26
25
13
14
16
17
19
20
22
23
INDUSTRIAL TEMPERATURE RANGE
2
IDT74LVC16245A
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SSOP / TSSOP
TOP VIEW
PIN CONFIGURATION
NOTES:
1. H = HIGH Voltage Level
X = Don’t Care
L = LOW Voltage Level
Z = High-Impedance
Inputs
xOE xDIR Outputs
L L Bus B Data to Bus A
L H Bus A Data to Bus B
HX Z
FUNCTION T ABLE (EACH 8-BIT SECTION)(1)
Pin Names Description
xOE Output Enable Inputs (Active LOW)
xDIR Direction Control Input
xAx Side A Inputs or 3-State Outputs
xBx Side B Inputs or 3-State Outputs
PIN DESCRIPTION
NOTE:
1. As applicable to the device type.
Symbol Parameter(1) Conditions Typ. Max. Unit
CIN Input Capacitance VIN = 0V 4.5 6 pF
COUT Output Capacitance VOUT = 0V 6.5 8 pF
CI/O I/O Port Capacitance VIN = 0V 6.5 8 pF
CAPACITANCE (TA = +25°C, F = 1.0MHz)
Symbol Description Max Unit
VTERM(2) Terminal Voltage with Respect to GND –0.5 to +6.5 V
VTERM(3) Terminal Voltage with Respect to GND –0.5 to +6.5 V
TSTG Storage Temperature –65 to +150 °C
IOUT DC Output Current –50 to +50 mA
IIK Continuous Clamp Current, –50 mA
IOK VI < 0 or VO < 0
ICC Continuous Current through each ±100 mA
ISS VCC or GND
ABSOLUTE MAXIMUM RATINGS(1)
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. All terminals except VCC.
1DIR
1B1
GND
VCC
GND
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
40
41
42
43
44
45
46
47
481
1B2
1B3
1B4
1B5
1B6
1B7
1B8
2B1
2B2
GND
2B3
2B4
2B6
2B5
VCC
GND
2B8
2B7
2DIR
1OE
1A1
GND
VCC
GND
1A2
1A3
1A4
1A5
1A6
1A7
1A8
2A1
2A2
GND
2A3
2A4
2A6
2A5
VCC
GND
2A8
2A7
2OE
INDUSTRIAL TEMPERATURE RANGE
IDT74LVC16245A
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
3
Symbol Parameter Test Conditions Min. Typ.(1) Max. Unit
VIH Input HIGH Voltage Level VCC = 2.3V to 2.7V 1.7 — — V
VCC = 2.7V to 3.6V 2 — —
VIL Input LOW Voltage Level VCC = 2.3V to 2.7V — — 0.7 V
VCC = 2.7V to 3.6V — — 0.8
IIH Input Leakage Current VCC = 3.6V VI = 0 to 5.5V — — ±5μA
IIL
IOZH High Impedance Output Current VCC = 3.6V VO = 0 to 5.5V — — ±10 μA
IOZL (3-State Output pins)
IOFF Input/Output Power Off Leakage VCC = 0V, VIN or VO ≤ 5.5V — — ±50 μA
VIK Clamp Diode Voltage VCC = 2.3V, IIN = –18mA — –0.7 –1.2 V
VHInput Hysteresis VCC = 3.3V — 100 — mV
ICCL Quiescent Power Supply Current VCC = 3.6V VIN = GND or VCC —— 10μA
ICCH
ICCZ 3.6 ≤ VIN ≤ 5.5V(2) —— 10
ΔICC Quiescent Power Supply Current One input at VCC - 0.6V, other inputs at VCC or GND — — 500 μA
Variation
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Operating Condition: TA = –40°C to +85°C
NOTES:
1. Typical values are at VCC = 3.3V, +25°C ambient.
2. This applies in the disabled state only.
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C.
OUTPUT DRIVE CHARACTERISTICS
Symbol Parameter Test Conditions(1) Min. Max. Unit
VOH Output HIGH Voltage VCC = 2.3V to 3.6V IOH = – 0.1mA VCC – 0.2 — V
VCC = 2.3V IOH = – 6mA 2 —
VCC = 2.3V IOH = – 12mA 1.7 —
VCC = 2.7V 2.2 —
VCC = 3V 2.4 —
VCC = 3V IOH = – 24mA 2.2 —
VOL Output LOW Voltage VCC = 2.3V to 3.6V IOL = 0.1mA — 0.2 V
VCC = 2.3V IOL = 6mA — 0.4
IOL = 12mA — 0.7
VCC = 2.7V IOL = 12mA — 0.4
VCC = 3V IOL = 24mA — 0.55
INDUSTRIAL TEMPERATURE RANGE
4
IDT74LVC16245A
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
OPERA TING CHARACTERISTICS, VCC = 3.3V ± 0.3V, TA = 25°C
Symbol Parameter Test Conditions Typical Unit
CPD Power Dissipation Capacitance per Transceiver Outputs enabled CL = 0pF, f = 10Mhz 38 pF
CPD Power Dissipation Capacitance per Transceiver Outputs disabled 4
SWITCHING CHARACTERISTICS(1)
VCC = 2.7V VCC = 3.3V ± 0.3V
Symbol Parameter Min. Max. Min. Max. Unit
tPLH Propagation Delay —4.7 1 4 ns
tPHL xAx to xBx, xBx to xAx
tPZH Output Enable Time —6.7 1.5 5.5 ns
tPZL xOE to xAx or xBx
tPHZ Output Disable Time —7.1 1.5 6.6 ns
tPLZ xOE to xAx or xBx
tSK(o) Output Skew(2) —— — 1ns
NOTES:
1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C.
2. Skew between any two outputs of the same package and switching in the same direction.
INDUSTRIAL TEMPERATURE RANGE
IDT74LVC16245A
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
5
Open
VLOAD
GND
VCC
Pulse
Generator D.U.T.
500
500
CL
RT
VIN VOUT
(1, 2)
LVC Link
INPUT
VIH
0V
VOH
VOL
tPLH1
tSK (x)
OUTPUT 1
OUTPUT 2
tPHL1
tSK (x)
tPLH2 tPHL2
VT
VT
VOH
VT
VOL
tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1
LVC Link
SAME PHASE
INPUT TRANSITION
OPPOSITE PHASE
INPUT TRANSITION
0V
0V
VOH
VOL
tPLH tPHL
tPHL
tPLH
OUTPUT
VIH
VT
VT
VIH
VT
LVC Link
DATA
INPUT 0V
0V
0V
0V
tREM
TIMING
INPUT
ASYNCHRONOUS
CONTROL
SYNCHRONOUS
CONTROL
tSU tH
tSU tH
VIH
VT
VIH
VT
VIH
VT
VIH
VT
LVC Link
LOW-HIGH-LOW
PULSE
HIGH-LOW-HIGH
PULSE
VT
tW
VT
LVC Link
CONTROL
INPUT
tPLZ 0V
OUTPUT
NORMALLY
LOW tPZH
0V
SWITCH
CLOSED
OUTPUT
NORMALLY
HIGH
ENABLE DISABLE
SWITCH
OPEN
tPHZ
0V
VOL+VLZ
VOH
VT
VT
tPZL
VLOAD/2 VLOAD/2
VIH
VT
VOL
VOH-VHZ
LVC Link
TEST CIRCUITS AND WAVEFORMS
Propagation Delay
Test Circuit for All Outputs
Enable and Disable Times
Set-up, Hold, and Release Times
NOTES:
1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs.
2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank.
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
NOTES:
1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
2. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns.
Output Skew - tSK(X)
Pulse Width
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
Symbol VCC(1)= 3.3V±0.3V VCC(1)= 2.7V VCC(2)= 2.5V±0.2V Unit
VLOAD 6 6 2 x Vcc V
VIH 2.7 2.7 Vcc V
VT1.5 1.5 Vcc / 2 V
VLZ 300 300 150 mV
VHZ 300 300 150 mV
CL50 50 30 pF
TEST CONDITIONS
SWITCH POSITION
Test Switch
Open Drain
Disable Low VLOAD
Enable Low
Disable High GND
Enable High
All Other Tests Open
INDUSTRIAL TEMPERATURE RANGE
6
IDT74LVC16245A
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
ORDERING INFORMATION
CORPORATE HEADQUARTERS for SALES: for Tech Support:
6024 Silver Creek Valley Road 800-345-7015 or 408-284-8200 logichelp@idt.com
San Jose, CA 95138 fax: 408-284-2775
www.idt.com
XX LVC XXXX XX
Package
Device Type
Temp. Range
PVG
PAG
16
74
Shrink Small Outline Package - Green
Thin Shrink Small Outline Package - Green
16-Bit Bus Transceiver with 3-State Outputs
-40°C to +85°C
XXX
Family
Bus-Hold
245A
No Bus-hold
Double-Density, ±24mA
Blank
Blank
8
Tube or Tray
Tape and Reel
X
DATASHEET DOCUMENT HISTORY
07/28/2015 Pg. 1,2,6 Updated the ordering information by removing the "IDT" notation, PF, PFG, non RoHS parts and
adding Tape and Reel information.
