9032010000 - Weidmuller - Product.Network

Stripping

C.1

Contents

Stripping

Introduction C.2

Stripping and cutting tools C.4

Stripping tool C.10

Stripping tool for coaxial cable C.12

Stripping

C.2

Introduction

After a conductor has been cut it is then prepared for the next

step or for crimping. For this purpose, a specific length of the

conductor insulation has to be removed, while preventing dam-

age to the conductor. The length of the conductor insulation to

be removed depends on the terminal clamping point or the

crimp to be processed.

Professional stripping tools guarantee perfect results due to

precise adjustment of the tool to the corresponding insulation

and the conductor cross-section.

Precision tools by Weidmüller guarantee that the user will

always obtain consistent, reliable stripping results.

“Stripping” means the cutting and removal of the insulation.

The following must be ensured in performing this task.

The stripping dimension must be observed and neither the

conductor nor the remaining insulation must be damaged.

To avoid mistakes, use a stripping tool matched to the

insulation and cross-section of the conductor.

Do not use work knives or penknives because the stripping

quality when using such tools depends entirely on the manual

dexterity of the user. The quality is not consistent, even when

the user is highly skilled.

Preference should be given to hand-operated tools that adjust

automatically to the corresponding cross-section of the

conductor. They do not damage to the conductor during

stripping and avoid faults.

stripax® stripping tools guarantee a consistent stripping result

which complies with DIN regulations. The tools are rated

for standard dimension PVC insulation. Any PVC insulation

thicknesses deviating from normal can be set manually. The

conductor stopper and integrated wire cutter allow highly

versatile use of the tools.

Special insulation types such as Teflon, Silicone and Kapton

require special stripping tools. These tools strip the conductor

with punch blades.

Stripping

C.3

Introduction

DIN IEC 60352 part 2 contains references to stripping

faults which must be avoided:

Possible faults during stripping:

Stripping

Insulation has not been cut

properly

Remains of the conductor

insulation are still to be found

on the stripped conductor

Correctly stripped conductor

The conductor insulation has

been damaged by the stripping

tool

Single conductors have been

damaged or cut off by the

stripping tool

Single conductors have been

twisted too tightly afterwards

Single conductors are no

longer twisted.

C.4

Note

Type Qty. Order No.

Spare stripping blades 1 1119030000

Accessories

Type Qty. Order No.

Spare stripping blades 1 1119040000

Stripping

Stripping and cutting tools

• forexibleandsolidconductorswithPVC

insulation

• Cablewithdoubleinsulationintwoprocessing

stepswithoutspecialadjustment

• Automaticopeningofclampingjawsafter

stripping

• Noplayinself-adjustingcuttingunit

• Long-lasting

• Nosplicingofsingleconductors

• Optimisedergonomicdesign

• Strippinglengthadjustableviastop

• Adjustablefordifferentinsulationthicknesses

• switchablepartialstrippingfunction

• Removablehandleshells

• Fold-outcuttingprotection

• CustommarkingwithESGdevicemarkers

Technical data

Max. stripping performance

Cabletype

Conductorcross-section mm2

Strippinglength,max. mm

Cutting performance

Max.cuttingperformance mm2

Tool data

Length mm

Weight g

Note

Ordering data

Version

Note

stripax®

0.08 - 10 mm²

stripax® 16

6 - 16 mm²

stripax®

FlexibleandsolidconductorswithPVCinsulation

0.08...10

190

175

Type Qty. Order No.

stripax®19005000000

stripax® 16

FlexibleandsolidconductorswithPVCinsulation

6...16

190

175

Type Qty. Order No.

stripax® 16 1 9005610000

• Stripping:PVCinsulatedexibleconductor,size

0.08...10mm²(~AWG28...7)

• Cutting:PVCinsulatedexibleconductor,size

0.08...6mm²(~AWG28...10)

• Conductorsundamagedduetospecialself

adjustingstrippingblades.

• Processingofmulti-conductors,withthinat

ribboncablesandevenmultipleconductorsin

oneoperation

• Stripping:PVCinsulatedexibleandsolid

conductors(~AWG10...6)

• Cutting:PVCinsulatedexibleandsolid

conductors,upto6mm²(AWG10)

• Conductorsundamagedduetospecialself

adjustingstrippingblades.

Stripping

C.5

Stripping and cutting tools

Mini-duro-stripax

Blade set

Stripping and cutting tool for conduc-

tors with special insulation Types for

conductor diameters 0.2 … 1.21 mm

(~ AWG 32 … 18)

• FlexibleandsolidconductorswithPVC,Teon

(PTFE)andsiliconeinsulation

• Specialstrippingbladesdonotdamagethe

conductor

• Nosplicingofthesingleconductors

• Bladeinsertscanbeeasilyreplaced

• Allinsertstonehousing

Mini-duro-stripax

3–7

2.2

135

110

white yellow red green blue black

0.3–1.3 0.2–0.3 0.3–0.5 0.55–0.8 0.88–0.92 1.0–1.21

28…18

32/1,32/7,30/1,30/7

28/1,28/7,28/19,26/1,

24/7,24/19,22/1, 20/7,20/19 18/1,18/7,18/19

26/7,26/19,24/1

22/7,22/19,20/1

≈0.08...1.0

PVC/silicone PTFE PTFE PTFE PTFE PTFE

Order No. Order No. Order No. Order No. Order No. Order No.

9001280000 9003700000 9003710000 9003720000 9003730000 9003740000

Order No.

9003500000

Order No. Order No. Order No. Order No. Order No. Order No.

9006970000 9003600000 9003610000 9003620000 9003630000 9003640000

9001290000

Technical data

Max.strippinglength

Strippingdiametermax.cuttingperformance mm

Tool data

Length mm

Weight g

Selection of blade sets

 Colourbladeset

Conductordiameter mm(min./max.)

 AWG



 mm2

 Insulationmaterial

Information

Ordering data

Tools with blade set

Tool with all blade sets

Accessories

Bladeset

Setofstrippingblades(MiniStripaxuptoApril2003)

Information

Stripping

C.6

Stripping and cutting tools

multi-stripax®

Cables for

Rail industry

Cables for the

aerospace industry

Bus applications

AWG lines Fieldbus lines Standardised

conductors

Sensor and

actuator lines

Sensors and actuators in the field

Power supply and distribution

The challenge

Cutting Positioning Stripping

Strippingisthenamegiventothecuttingandremovalof

conductorinsulation.Whencarryingoutthistaskitmustbe

guaranteedthattheappropriatelengthofinsulationisremoved

andthatneithertheconductornortheremaininginsulation

aredamagedinanyway.

DINIEC352part2(formerlyDINIEC48/290)containsdetails

ofthestrippingfaultstoavoid.

Stripping

C.7

Stripping and cutting tools

multi-stripax®

Multifunctional stripping tool for use on a multitude of

conductor insulation forms and configurations – even

those not covered by the standard

multi-stripax® – the troubleshooter

• Interchangeablestrippingunits

• Properstrippingofanyconductor–round,flatorspecial

profiles–thankstothespeciallyshapedstrippingblades

• Incorporatescuttingfunctionforupto2.5mm2solidand

6mm2fine

• Non-fatiguingoperationthankstoergonomicdesign

• Nodamagetoconductororremaininginsulation

• Goodstrippingresultsforindustrialapplications

• Strippingresultsreproducedaccuratelytimeandtimeagain

• Along-lasting,reliabletoolthankstoitsrobustdesign

• Plus,thecustomaryWeidmüllerrepairservice

Special stripping units – the answer to diverse stripping

tasks

Themulti-stripax®tool–distinguishedbyitsrobustdesign–

wasdevelopedtohandleallthestrippingtasksmetwith

inpractice.Thankstotheinterchangeablestrippingunits,

aspecialsolutioncanbefoundforeverychallengeinthe

marketplace.

Thespeciallyshapedstrippingbladesguaranteeperfect

strippingresults.Theguideplatesensurethecorrectpositioning

ofthewireandthereforepreventdamagetotheremainingwire.

Theclampingjawsholdtheconductorwithjusttherightforce

duringthestrippingoperationandarematchedtothespecific

situation.Thisflexibilitywithinthevariablesthataffecttheresult

ofthestrippingoperationturnsthemulti-stripax®toolintoa

universaltroubleshooter.

Stripping

C.8

Stripping and cutting tools

multi-stripax®

• Speciallyshapedstrippingbladesenable

strippingofspecialtypesofinsulationand

conductorconfigurations

• High-qualitystrippingforindustrialapplications

• Strippingresultsreproducedaccuratelytime

andtimeagain

• Along-lasting,reliabletoolthankstoitsrobust

design

• Optimisedergonomicdesign

• Nodamagetotheconductororinsulation

• Highlyflexiblethankstointerchangeable

strippingunits

• Adjustablestopforsettingstrippinglengths

from2.3to30mm

• Thestrippinglengthcanbeincreasedby

repeatingthestrippingprocess.

• Integralcuttingfunctionformax.2.5mm2solid

or6mm2flexiblecables

Technical data

Cabletype PVC,Teflon,PTE,PUR,silicone,halogen-free

Conductorcross-section,min. 2mm

Conductorcross-section,max. nolimit(inseveralsteps)

max.cuttingcapacity,fine-strand 6mm²

max.cuttingcapacity,solid 2.5mm²

max.cuttingcapacity,ribbon 10.2x4mm

Length/Width/Height 250/85/40mm

Weight 250g

Information

multi-stripax®

Stripping

C.9

Stripping and cutting tools

Ordering data

Type Conductor Insulation Shaped blade Code Qty. Order No.

multi-stripax16SL

strippingunitmulti-stripax16SL

16mm²

Standard

stranded

PVC C 1

9202220000

9202270000

multi-stripax6-16

strippingunitmulti-stripax6-16

6mm²

10mm²

16mm²

solid

stranded

flexible

PVC D1

9202210000

9202260000

multi-stripaxASI

strippingunitmulti-stripaxASI

ASIcable

1.5mm²

PTE

PUR

EPDM

9202250000

9202300000

multi-stripaxAWG

strippingunitmulti-stripaxAWG

AWG26

AWG24

AWG22

AWG20

AWG18

AWG16

PTFE

PVC A1

9202230000

9202280000

multi-stripax0.75-4²SL

strippingunitmulti-spx0.75-4²SL

0.75mm²

1mm²

1.5mm²

2.5mm²

4mm²

PVC

halogen-free H1

9203610000

9203730000

multi-stripax0.25-1.5S

strippingunitM-SPX0.25-1.5S

0.25mm²

0.5mm²

0.75mm²

1mm²

1.5mm²

PVC

halogen-free I1

9204540000

9204550000

multi-stripax1.5-6.0S

strippingunitM-SPX1.5-6.0S

1.5mm²

2.5mm²

4mm²

6mm²

PVC

halogen-free J1

9204560000

9204570000

Information

Accessories

Type Description Qty. Order No.

ERMEMULTI-STRIPAX cuttingblade 19203070000

ERANMULTI-STRIPAX wirestop-set 19203100000

Information

METRIC

Stripping

C.10

Sheathing strippers

•SheathingstripperforroundPVCcables

Technical data

Max. stripping performance

Cabletype

Conductorcross-section -

Conductordiameter mm

Depthofcut

Cutting performance

UTPundSTPdatacables,max.diameter -

Flexible(max.conductorcross-section) -

Tool data

Length mm

Weight g

Note

•Pivotingbladeforcircular,longitudinaland

spiralcuts

•Retainingclipwithintegratedbladetobreak

openanincisionintheinsulation

•Integratedspareblade

Ordering data

Version

Note

Accessories

Note

AM 25 / AM 35

AM 25: Ø 6...25 mm; AM 35: Ø 25...36 mm

AM 25 AM 35

PVCroundcable PVCroundcable

6...25 25...36

adjustableupto4.5mm adjustableupto4.5mm

135 140

135 135

Type Qty Order No.

AM25 19001540000

AM35 19001080000

Type Qty Order No.

Spareblades 2 9001530000

Sheathingstripper

AM 12

For UTP and STP data cables

•CutsUTPandSTPdatacablesandother

exiblecoppercableswithadiameterofupto4

mm²(~AWG11)

•StripstheouterinsulationofUTPandSTPdata

cablesandotherroundcableswithø0.5...

12.5mm

•Nodamagetotheshieldingorconductordueto

adjustablestrippingblade

•Lengthendstopforrepeatedcuttingor

strippinglengths

AM 12

UTPandSTPdatacables

AWG20...11

0.5...12.5

adjustable

Type Qty Order No.

AM12 19030060000

Type Qty Order No.

Sheathingstripper

Stripping tools

Stripping

C.11

Sheathing strippers

Technical data

•SheathingstripperforPVCcables

•Insulationcanbestrippedfromanypointalong

thecable

•Openingofslitinsulationbymeansofintegrated

cutter

Max. stripping performance

Cabletype

Conductorcross-section -

Conductordiameter mm

Depthofcut

Cutting performance

UTPundSTPdatacables,max.diameter mm

Flexible(max.conductorcross-section) mm²

Tool data

Length mm

Weight g

Note

Version

Note

For round cable, Ø 6...17 mm

AM 16

Type Qty Order No.

AM 16 1 9204190000

Type Qty Order No.

Spareblade 19204260000

Sheathingstripper

Ordering data

AM 16

PVCroundcable

6...17

0.8-2.5mm

Accessories

•Especiallysuitableforstrippingcablesinthe

cableduct,too

AMF 6/10

For ribbon cable, 6 mm² and 10 mm²

AMF 6/10

PVCribboncable

0-4.0mm

110

115

Type Qty Order No.

AMF6/10 19204180000

Type Qty Order No.

Spareblade 19204250000

Sheathingstripper

Stripping tools

Stripping

C.12

Cutter cassettes for CST

Colour cutter cassettes B [mm] C [mm]

9.3grey

0.6red

0.21yellow

5.6blue

8.6white

5.17.1green

3.57.5brown

3.78.0orange

6.06.0light green

Dim. A as stated by manufacturer (not defined by tool)

Colour cutter cassettes Qty. Order No.

1grey 9032050000

1red 9032040000

1yellow 9032030000

1blue 9032020000

1white 9204340000

1green 9032000000

1brown 9032010000

1orange 9032200000

1light green 9032210000

2.38.6black

1black 9032220000

two

step three

step

Sheathing strippers for coaxial cable

•Forcoaxialcableandround(shielded)data

cablesfrom2.5to8mmdiameter

•1-,2-and3-levelstrippinginonestep

•Fastchangeovertoothercabletypesthanksto

adjustableinterchangeablescrewholder

•Colour-codedreplaceablecassetteswithpreset

strippinglengthsforstandardcoaxcable.Refer

tothetable.

•Settingblock(included)permitsquickpresetting

ofcuttingdepths

•Bladecassettescanbeusedonbothsides

Technical data

Max. stripping performance

Cabletype

Conductordiameter mm

Strippinglength,max. -

Tool data

Length mm

Weight g

Note

•RG58andRG71

•RG59andRG62

•Antennacable

•Probuscable

•Ethernetcable

Ordering data

Version

Note

Accessories

Note

CST / IE-CST

ø 2.5...8 mm

CST IE-CST

Coaxial&rounddatacables Coaxial&rounddatacables

2.5...8 2.5...8

100 100

65 85

IE-CSTincludingbladecartridge,adjustedtoWeidmüllerEthernetcable

CSTnotincludingbladecartridge

Type Qty Order No.

CST 19030500000

IE-CST 19204350000

Type Qty Order No.

Screwholder 19032060000

Screwdriver 19005720000

Settingblock 19005800000

DimensionA:asspeciedbyconnectormanufacturer(notdenedby

tool)

Stripping tool for coaxial cable

Stripping

C.13

Sheathing strippers for coaxial cable

Technical data

•Forcoaxialcableandround(shielded)data

cablesfrom2.5...8mmdiameter

•1-,2-and3-levelstrippinginonestep

•Adjustablestrippinglengthsin1-mmsteps

formeshworkanddielectricmaterials(min.

strippinglengthapprox.3.2mm)

•Fastchangeovertoothercabletypes

•max.strippinglength17mm

•incl.3blades

Max. stripping performance

Cabletype

Conductordiameter mm

Strippinglength,max. mm

Tool data

Length mm

Weight g

Note

Version

Note

ø 2.5...8 mm

CST vario

Type Qty Order No.

CSTVARIO 19005700000

Type Qty Order No.

Screwdriver 19005720000

Bladeholder 19005740000

Bladeinsert 19005730000

Includessparebladeset(1set=3blades)

Ordering data

CST VARIO

Coaxial&rounddatacables

2.5...8

116

Accessories

•RG58andRG71

•RG59andRG62

•Antennacable

•Probuscable

•Ethernetcable

Stripping tool for coaxial cable

CST Vario blade holder

Type Qty Order No.

CSTVARIOBLADEHOLDER 19005740000

Ordering data

CST Vario blade insert

Type Qty Order No.

CSTVARIOBLADEINSERT 19005730000

Ordering data

CST Screwdriver

Type Qty Order No.

CSTSCREWDRIVER 19005720000

Ordering data

Setting block CST

Type Qty Order No.

CSTSETTINGBLOCK 19005800000

Ordering data

Screw holder CST

Type Qty Order No.

CSTSCREWHOLDER 19032060000

Ordering data

Stripping

C.14