Accessories
Front Panels
REV. NOV. 29, 2003 Page 1 of 5
Front Panels
Table of Contents Page
Description ....................................................................... 1
Schroff
System for 3 U Rack............................................ 2
Description
Front panels are available for 19" rack mounting of 3 U cas-
sette type power supplies in
Schroff
system version (
Inter-
mas
on request) and may be attached to the converter by
means of countersunk screws.
An assembly kit, consisting of a front panel and a support
bracket, enables arrangement of two standard cassettes
with up to six output voltages in 6 U configuration.
All front panels are of colourless anodised aluminium and
delivered with one or two grey plastic handles of 3 TE for
easy pull-out and two or four hand-press insertable plastic
retainers with captive screws for fixing to the rack.
Note: Front panel mounting or custom specific front panels
are available on request.
Dimensions in accordance to DIN 41494-1 (IEC 60297):
Width: 1 TE = 5.08 mm (0.20")
Height: 1 U = 44.45 mm (1.750")
(In Europa often
HE
instead of
U
is used.)
Tolerances ±0.2 mm, unless otherwise specified
Page
Intermas
System for 3 U Rack ......................................... 4
Schroff
System Kit for 6 U Rack ...................................... 5
Accessories
Front Panels
REV. NOV. 29, 2003 Page 2 of 5
Schroff
System for 3 U Rack
Q-, PC-, P- Series Front Panels in 4, 5 or 6 TE
This front panel av ailab le in three v ersions fits to all DC-DC
converters of the Q- and P-Families and to the AC-DC
converters of the PC Series with case size Q.
Table 1: Q01 case front panel selection
X Case Converter Type
TE mm size series Part no.
4 20.0 Q01 Q G04-Q01
Q03 PC
Q04 P G04-Q04
5 25.1 Q01 Q G05-Q01
Q03 PC
Q04 P G05-Q04
6 30.2 Q01 Q G06-Q01
Q03 PC
Q04 P G06-Q04
Note: F or use of sev eral units ne xt to each other , we advise
to pack them not too densely in order to assure good ther-
mal management (see also relevant data sheet).
Delivery contents:
F ront panel, gr ey plastic handle , three countersunk scre ws,
set of two plastic retainers with captive screws and assem-
2.5±0.1
128.4
6.4 ±0.1
9.2 ±0.1 104 ±0.1
X
0.2 122.4
413
9.5
50
20.613
12002
Q04 only
Fig. 1
Front panel for Q case size
bly instructions.
H- and M Series Front Panel in 8 TE
This front panel fits to all 50 Watt DC-DC and AC-DC con-
verters of the 12,...,LH Series with case size H02 as well as
to all AM to LM- and CMZ to LMZ Series versions with case
size M02.
Table 2: H02 and M02 case front panel selection
TE mm Case Converter Type
size series Part no.
8 40.3 M02 M G08-M02
H02 H
Delivery contents:
Front panel with grey plastic handle, two countersunk
screws, set of two plastic retainers with captive screws and
assembly instructions
128.4
4.4
±0.1
31.5
±0.1
2.5
±0.1
18.2
±0.1
94.5
±0.1
40.3 (8 TE)
0.2 122.4
426
9
50
12003
Fig. 2
Front panel for H02 and M02 case size
Accessories
Front Panels
REV. NOV. 29, 2003 Page 3 of 5
PSL Series Front Panel in 8 TE
This front panel fits to all Switching Regulators of the PSL
Series with case size L04.
Table 3: L case front panel selection
TE mm Case Converter Type
size family Part no.
8 40.3 L04 PSL 1 G08-L
1Exception: PSL with option D is par t no. G08-L04-D
Note: This front panel is a compatible replacement for all
earlier versions of the same size, published in any previous
front panel data sheet.
Delivery contents:
Front panel with grey plastic handle, two countersunk
screws, set of two plastic retainers with captive screws and
assembly instructions.
Fig. 3
Front panel for L01 and L04 case size
128.4
18.4
±0.1
2.5
±0.1
11.7
±0.1
100
±0.1
40.3 (8 TE)
0.2 122.4
12.2
26
7
50.5
85
Option D
1
12004
PSS and S Series Front Panels in 12 TE
PSK and K Series Front Panels in 16 TE
This front panel fits to all Switching Regulators of the PSS
and PSK Series with case size S01 or K01 as well as to all
100 to 150 Watt DC-DC and AC-DC converters of the
AS,...,LS and AK to LK Series with case size S02 or K02
according to the selection table below:
Table 4: S and K case front panel selection
X Case Converter Type
TE mm size series Part no.
12 60.6 S01 PSS G12-S
S02 S
16 81.0 K01 PSK G16-K
K02 K
Delivery contents:
Front panel with grey plastic handle, two countersunk
screws, set of four plastic retainers with captive screws and
assembly instructions.
128.4
4.4 ±0.1 27.4 ±0.1 2.5 ±0.1
9.7 ±0.1 103 ±0.1
X
0.2 122.4
429
9
50
12005
Fig. 4
Front panel for S01, S02, K01 and K02 case size
Accessories
Front Panels
REV. NOV. 29, 2003 Page 4 of 5
T Series Front Panel in 28 and 26 TE
This front panel fits to all 500 Watt AC-DC converters of the
T Series with case size T01.
Table 5: T case front panel selection
X Case Series Type
TE mm size Part no.
28 141.9 T01 T G28-T01
Delivery contents:
Front panel with two grey plastic handles, three counter-
sunk screws, set of four plastic or metal retainers with cap-
tive screws and assembly instructions.
G28-T01 met with metal screw retainers
G28-T01 plas with plastic screw retainers
Blind plates: to close a non fully equipped 19" rack (only
one or two LTs mounted). Power-One offers 28 TE wide
blind plates without hole.
G28-T01-blank met, with metal screw retainers
G28-T01-blank plas, with plastic screw retainers
Fig. 5
Front panel for T01 case size
128.4
26.2 ±0.1 2.5 ±0.1
9.7 ±0.1 103
X
0.2 122.4
56.7 29
9
50
81.8 ±0.1
12006
Intermas
System for 3 U Rack
The major differences between the Intermas and the
Schroff system front panels are the thickness (2 mm in-
stead of 2.5 mm), the hole size for the plastic retainers and
a small cut-out on each side (see figure:
Intermas system
front panel
). All other dimensions are given in the relevant
Schroff front panel drawings.
The following Intermas front panels are available on re-
quest:
Table 6: Intermas front panel selection
X Case Converter Type
TE mm size series Part no.
8 40.3 H02 H F08-M02
M02 M
8 40.3 L01 PSL 1 F08-L
12 60.6 S01 PSS F12-S
S02 S
16 81.0 K01 PSK F16-K
K02 K
1Exception: PSL with option D is type/par t no. F08-L04-D
Delivery contents:
Front panel with grey plastic handle, two countersunk
screws and assembly instructions.
2
±0.1
16.5
16.5
0.6
Option D
1
12007
X
Fig. 6
Intermas system front panel (various case sizes)
Accessories
Front Panels
REV. NOV. 29, 2003 Page 5 of 5
Fig. 7
Front panel for 6 U configuration (various case sizes)
261.8
2.5
±0.1
X
0.2 255.8
Support
bracket
12008
Schroff
System Kit for 6 U Rack
To configure Power-One Power Supplies for use in 6 U
racks a special assembly kit has been created consisting of
a double height front panel together with a support bracket
for two converters as shown in figure 7.
All other dimensions are given in the relevant 3 U front
panel drawings according to their case size. The assembly
kit is available with the type designation according to the
following table:
Table 7: 6 U assembly kit selection
X Case Converter Type
TE mm size series Part no.
5 25.1 Q01 Q Kit G05-6HE-Q01
Q03 PC
8 40.3 H02 H Kit G08-6HE-M02
M02 M
12 60.6 S01 PSS Kit G12-6HE-S
S02 S
16 81.0 K01 PSK Kit G16-6HE-K
K02 K
Delivery contents:
Double height front panel with two grey plastic handles, four
countersunk screws, set of two plastic retainers with cap-
tive screws, a support bracket and assembly instructions.
