952 34,2 MAX 125 32 MAX PANEL asso, | .-j |] K JACK MH | PY LLL \ M7.0 X 0.75-6g 312 HEX MOUNTING NUT 7.9 CLAMP NUT LOCKWASHER NOTES: 1. CAPTURED CENTER CONTACT DESIGNED FOR USE WITH REVISIONS 085 SR. REV DESCRIPTION DATE | APPROVED CABLE ENTRY DIAMETER | Q4,| RELEASED 11-3-97| KYLE MINIMUM CLAMP NUT 089 SLEEVE 064 236 win CONTACT 021 6.5 RECOMMENDED 250 MOUNTING HOLE HEX 6.4 IN | 276 % MIN 7.0 SLEEVE STAINLESS STEEL PER GOLD PLATE PER ASTM-A484 AND ASTM- MIL-G-45204 A582, TYPE 303 HOUS ING STAINLESS STEEL PER PASSIVATE PER CLAMP NUT ASTM-A484 AND ASTM- QQ-P-35 MOUNTING NUT A582. TYPE 303 BUSH I NG DIELECTRIC PTFE FLUOROCARBON N/A CENTER CONTACT PER ASTM-D-1457 BERYLLIUM COPPER PER GOLD PLATE PER mm (REF) ASTM-B-196 OR ASTM-B-197, MIL-G-45204 ALLOY 17300, CONDITION H LOCKWASHER BERYLLIUM COPPER PER GOLD PLATE PER ASTM-B-196, ALLOY MIL-G-45204 C17300, CONDITION H CAP VINYL PLASTIC N/A COMPONENT MATERIAL FINISH UNLESS OTHERWISE SPECIFIED |DRAWN BY DATE DIMENSIONS ARE IN INCHES Ee LE ita97 AMP Incorporated 7 140 Fourth Avenue yes 2005 a APPD BY Waltham, MA 02451-7599 These drawi d ifi- TITLE *OS-50 BULKHEAD cations are the property of USE ASS'Y PROCEDURE FEEDTHRU CABLE JACK and shall not be reproduced CLAMP ATTACHMENT or Copied or vee an whole 408-04616 SIZE CODE DENT NO. REV the manufacture or sale _ (85-002) B 76805 1250 -27 34-02 01 0 f Itemts) without written permission. SCALE 6:1 SHEET 1 OF 1 DESIGN CONTROL REQUIRED CUSTOMER DRAWING AMP PART # 1083600-1 SHEET 10F 1 REV A