LXA20T600 QspeedTM Family 600 V, 20 A X-Series PFC Diode Product Summary IF(AVG) VRRM QRR (Typ at 125 C) IRRM (Typ at 125 C) Softness tb/ta (Typ at 125 C) 20 600 140 5.0 0.4 General Description A V nC A This device has the lowest QRR of any 600V Silicon diode. Its recovery characteristics increase efficiency, reduce EMI and eliminate snubbers. Applications * Power Factor Correction (PFC) Boost Diode * Motor drive circuits * DC-AC Inverters Pin Assignment Features * Low QRR, Low IRRM, Low tRR * High dIF/dt capable (1000A/s) * Soft recovery Benefits A * Increases efficiency * Eliminates need for snubber circuits * Reduces EMI filter component size & count * Enables extremely fast switching C TO-220AC RoHS Compliant Package uses Lead-free plating and Green mold compound. Halogen free per IEC 61249-2-21. Absolute Maximum Ratings Absolute maximum ratings are the values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Symbol Parameter VRRM IF(AVG) IFSM IFSM TJ(MAX) TSTG Peak repetitive reverse voltage Average forward current Non-repetitive peak surge current Non-repetitive peak surge current Maximum junction temperature Storage temperature Lead soldering temperature Power dissipation Peak repetitive reverse voltage PD VRRM Conditions TJ = 150 C, TC = 100 C 60 Hz, 1/2 cycle 1/2 cycle of t=28 s Sinusoid, TC=25 C Leads at 1.6 mm from case, 10 sec TC = 25 C Rating Units 600 20 105 350 150 -55 to 150 300 125 600 V A A A C C C W V Thermal Resistance Symbol Resistance from: Conditions RJA RJC Junction to ambient Junction to case TO-220 TO-220 www.powerint.com Rating Units 62 1.0 C/W C/W January 2011 LXA20T600 Electrical Specifications at TJ= 25 C (unless otherwise specified) Symbol Parameter Conditions Min Typ Max Units - 2.0 2.5 2.3 92 250 3.1 - A mA V V pF DC Characteristics IR Reverse current VF Forward voltage CJ Junction capacitance VR = 600V, TJ = 25 C VR = 600V, TJ = 125 C IF = 20A, TJ = 25 C IF = 20A, TJ = 150 C VR = 10V, 1 MHz Dynamic Characteristics tRR Reverse recovery time dI/dt =200 A/s VR=400 V, IF=20 A QRR Reverse recovery charge dI/dt =200 A/s VR=400 V, IF=20 A IRRM Maximum reverse recovery current dI/dt =200 A/s VR=400 V, IF=20 A S t Softness factor = b dI/dt =200 A/s VR=400 V, IF=20 A ta TJ=25 C TJ=125 C TJ=25 C TJ =125 C TJ =25 C TJ=125 C TJ =25 C TJ=125 C - 26.5 41.3 51 140 3.0 5.0 0.7 0.4 80 4.0 - ns ns nC nC A A Note to component engineers: X-Series diodes employ Schottky technologies in their design and construction. Therefore, Component Engineers should plan their test setups to be similar to those for traditional Schottky test setups. (For additional details, see Application Note AN-300.) VR D1 DUT L1 tRR IF dIF/dt ta 15V Pulse generator tb + Rg Q1 0 0.1xIRRM IRRM Figure 1. Reverse Recovery Definitions Figure 2. Reverse Recovery Test Circuit 2 www.powerint.com Rev 1.1 01/11 LXA20T600 400 60 55 50 45 40 35 30 25 20 15 10 5 0 350 Tj=125C 300 250 Tj=25C Cj (pF) IF (A) Electrical Specifications at TJ= 25 C (unless otherwise specified) 200 150 100 50 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 20 40 60 80 250 140 160 180 50 dIF /dt=500A/us 225 dIF /dt=200A/us 45 200 40 175 tR R (ns) Q R R (nC) 120 Figure 4. Typical Cj vs VR Figure 3. Typical IF vs VF 150 125 35 30 dIF /dt=500A/us 25 dIF /dt=200A/us 100 20 75 15 50 0 5 10 15 20 25 30 0 35 5 10 15 20 25 30 35 IF (A) IF (A) Figure 6. Typical tRR vs IF at TJ = 125 C Figure 5. Typical QRR vs IF at TJ = 125 C 40 140 35 120 30 100 25 P (W) IF(AV) (A) 100 VR (V) VF (V) 20 80 60 15 40 10 20 5 0 0 25 50 75 100 125 o Case Temperature, TC ( C) Figure 7. DC Current Derating Curve 150 25 50 75 100 125 150 o Case Temperature, TC ( C) Figure 8. Power Derating Curve 3 Rev 1.1 01/11 www.powerint.com IF(PEAK) (A) LXA20T600 duty cycle=10% 60 55 50 45 40 35 30 25 20 15 10 5 0 duty cycle=30% duty cycle=50% DC 25 50 75 100 T C(C) 125 150 Figure 9. IF(PEAK) vs TC, f=70 kHz LXA20T600 1 D= 0.5 D = 0.3 D= 0.1 0.1 Zth(j-c)/Rth(j-c) D= 0.05 D= 0.02 D= 0.01 0.01 D=0.005 D=0.002 Single Pulse 0.001 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 t1(sec) Figure 10. Normalized Maximum Transient Thermal Impedance 4 www.powerint.com Rev 1.1 01/11 LXA20T600 Dimensional Outline Drawings Millimeters Dim MIN MAX A 4.32 4.70 A1 1.14 1.40 A2 2.03 2.79 C 0.34 0.610 D 9.65 10.67 E 2.49 2.59 E1 4.98 5.18 F 0.508 1.016 F1 1.14 1.78 H 14.71 16.51 H1 5.84 6.55 H2 8.51 9.25 H3 3.53 3.96 H4 2.54 3.05 L 12.70 14.22 L1 - 6.35 Mechanical Mounting Method Maximum Torque / Pressure specification Screw through hole in package tab Clamp against package body 1 Newton Meter (nm) or 8.8 inch-pounds (lb-in) 12.3 kilogram-force per square centimeter (kgf/cm2) or 175 lbf/in2 Soldering time and temperature: This product has been designed for use with hightemperature, lead-free solder. The component leads can be subjected to a maximum temperature of 300 C, for up to 10 seconds. See Application Note AN-303, for more details. Ordering Information Part Number Package Packing LXA20T600 TO-220AC 50 units/tube The information contained in this document is subject to change without notice. 5 Rev 1.1 01/11 www.powerint.com LXA20T600 Revision 1.0 1.1 Notes Released by Qspeed Converted to Power Integrations Document Date 09/09 01/11 6 www.powerint.com Rev 1.1 01/11 LXA20T600 For the latest updates, visit our website: www.powerint.com Power Integrations reserves the right to make changes to its products at any time to improve reliability or manufacturability. Power Integrations does not assume any liability arising from the use of any device or circuit described herein. POWER INTEGRATIONS MAKES NO WARRANTY HEREIN AND SPECIFICALLY DISCLAIMS ALL WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. PATENT INFORMATION The products and applications illustrated herein (including transformer construction and circuits external to the products) may be covered by one or more U.S. and foreign patents, or potentially by pending U.S. and foreign patent applications assigned to Power Integrations. A complete list of Power Integrations' patents may be found at www.powerint.com. Power Integrations grants its customers a license under certain patent rights as set forth at http://www.powerint.com/ip.htm. The PI Logo, TOPSwitch, TinySwitch, LinkSwitch, DPA-Switch, PeakSwitch, CAPZero, SENZero, LinkZero, HiperPFS, HiperTFS, Qspeed, EcoSmart, Clampless, E-Shield, Filterfuse, StackFET, PI Expert and PI FACTS are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. (c)Copyright 2011 Power Integrations, Inc. Power Integrations Worldwide Sales Support Locations WORLD HEADQUARTERS 5245 Hellyer Avenue San Jose, CA 95138, USA. Main: +1-408-414-9200 Customer Service: Phone: +1-408-414-9665 Fax: +1-408-414-9765 e-mail: usasales@powerint.com GERMANY Rueckertstrasse 3 D-80336, Munich Germany Phone: +49-89-5527-3911 Fax: +49-89-5527-3920 e-mail: eurosales@powerint.com JAPAN Kosei Dai-3 Building 2-12-11, Shin-Yokohama, Kohoku-ku, Yokohama-shi, Kanagawa 222-0033 Japan Phone: +81-45-471-1021 Fax: +81-45-471-3717 e-mail: japansales@powerint.com TAIWAN 5F, No. 318, Nei Hu Rd., Sec. 1 Nei Hu District Taipei 114, Taiwan R.O.C. Phone: +886-2-2659-4570 Fax: +886-2-2659-4550 e-mail: taiwansales@powerint.com CHINA (SHANGHAI) Rm 1601/1610, Tower 1 Kerry Everbright City No. 218 Tianmu Road West Shanghai, P.R.C. 200070 Phone: +86-021-6354-6323 Fax: +86-021-6354-6325 e-mail: chinasales@powerint.com INDIA th #1, 14 Main Road Vasanthanagar Bangalore-560052 India Phone: +91-80-4113-8020 Fax: +91-80-4113-8023 e-mail: indiasales@powerint.com KOREA RM 602, 6FL Korea City Air Terminal B/D, 159-6 Samsung-Dong, Kangnam-Gu, Seoul, 135-728 Korea Phone: +82-2-2016-6610 Fax: +82-2-2016-6630 e-mail: koreasales@powerint.com EUROPE HQ 1st Floor, St. James's House East Street, Farnham Surrey GU9 7TJ United Kingdom Phone: +44 (0) 1252-730-141 Fax: +44 (0) 1252-727-689 e-mail: eurosales@powerint.com CHINA (SHENZHEN) th Rm A, B & C 4 Floor, Block C, Electronics Science and Technology Building 2070 Shennan Zhong Road Shenzhen, Guangdong, P.R.C. 518031 Phone: +86-755-8379-3243 Fax: +86-755-8379-5828 e-mail: chinasales@powerint.com ITALY Via De Amicis 2 20091 Bresso MI Italy Phone: +39-028-928-6000 Fax: +39-028-928-6009 e-mail: eurosales@powerint.com SINGAPORE 51 Newton Road, #19-01/05 Goldhill Plaza Singapore, 308900 Phone: +65-6358-2160 Fax: +65-6358-2015 e-mail: singaporesales@powerint.com APPLICATIONS HOTLINE World Wide +1-408-414-9660 APPLICATIONS FAX World Wide +1-408-414-9760 7 Rev 1.1 01/11 www.powerint.com