Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC481ST89 / 481ST89E v02.0710 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Typical Applications Features The HMC481ST89 / HMC481ST89E is an ideal RF/IF gain block & LO or PA driver for: P1dB Output Power: +19 dBm * Cellular / PCS / 3G Output IP3: +33 dBm * Fixed Wireless & WLAN Cascadable 50 Ohm I/Os * CATV, Cable Modem & DBS Single Supply: +6V to +12V * Microwave Radio & Test Equipment Industry Standard SOT89 Package Gain: 20 dB Included in the HMC-DK001 Designer's Kits Functional Diagram General Description The HMC481ST89 & HMC481ST89E are SiGe Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifiers covering DC to 5 GHz. Packaged in an industry standard SOT89, the amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO or PA driver with up to +21 dBm output power. The HMC481ST89(E) offer 20 dB of gain with a +33 dBm output IP3 at 1 GHz while requiring only 79 mA from a single positive supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 8.0 V, Rbias= 39 Ohm, TA = +25 C Parameter Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 5 GHz Min. Typ. 18 15.5 13 11 9 20 17.5 15 13 11 0.008 12 15 17 27 23 18 19 18 16 14 12 33 30 27 25 3.5 4.0 79 DC - 1.0 GHz 1.0 - 5.0 GHz DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz 0.5 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 4 GHz 4.0 - 5.0 GHz 16 15 13 11 9 Max. 0.016 Units dB dB dB dB dB dB/ C dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dBm dB dB mA Note: Data taken with broadband bias tee on device output. 8 - 134 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Gain vs. Temperature 20 S21 S11 S22 16 12 +25C +85C -40C 8 4 0 0 1 2 3 4 5 6 7 0 8 1 Input Return Loss vs. Temperature 4 5 6 0 +25C +85C -40C -5 RETURN LOSS (dB) INPUT RETURN LOSS (dB) 3 Output Return Loss vs. Temperature 0 -10 -15 -20 +25C +85C -40C -10 -20 -30 -40 -25 0 1 2 3 4 5 0 6 1 2 3 4 5 6 5 6 FREQUENCY (GHz) FREQUENCY (GHz) Reverse Isolation vs. Temperature Noise Figure vs. Temperature 0 10 -5 +25C +85C -40C 8 NOISE FIGURE (dB) REVERSE ISOLATION (dB) 2 FREQUENCY (GHz) FREQUENCY (GHz) +25C +85C -40C -10 -15 -20 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 24 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss 6 4 2 -25 0 -30 0 1 2 3 4 FREQUENCY (GHz) 5 6 0 1 2 3 4 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 135 HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz P1dB vs. Temperature 20 20 Psat (dBm) P1dB (dBm) 24 16 12 +25C +85C -40C 8 16 12 +25C +85C -40C 8 4 4 0 1 2 3 4 5 6 0 1 2 FREQUENCY (GHz) Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 33 30 27 +25C +85C -40C 21 18 0 1 2 3 4 5 6 Gain, Power & OIP3 vs. Supply Voltage for Constant Icc= 79 mA @ 850 MHz 36 24 3 FREQUENCY (GHz) Output IP3 vs. Temperature IP3 (dBm) AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Psat vs. Temperature 24 4 5 6 36 30 24 18 Gain P1dB Psat IP3 12 6 0 6 7 8 9 10 11 12 Vs (Vdc) FREQUENCY (GHz) Vcc vs. Icc Over Temperature for Fixed Vs= 8V, RBIAS= 39 Ohms 88 +85 C 86 84 Icc (mA) 82 +25 C 80 78 76 74 72 -40 C 70 68 66 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 Vcc (Vdc) 8 - 136 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Absolute Maximum Ratings +6.0 Vdc RF Input Power (RFIN)(Vcc = +5 Vdc) +10 dBm Junction Temperature 150 C Continuous Pdiss (T = 85 C) (derate 16.3 mW/C above 85 C) 1.06 W Thermal Resistance (junction to lead) 61.4 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: MOLDING COMPOUND MP-180S OR EQUIVALENT. 2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING. 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Collector Bias Voltage (Vcc) 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC481ST89 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC481ST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H481 XXXX [2] H481 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 137 HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Pin Descriptions AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins and package bottom must be connected to RF/ DC ground. Application Circuit Recommended Bias Resistor Values for Icc= 79 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) 6V 8V 10V 12V RBIAS VALUE 11 39 62 91 RBIAS POWER RATING 1/8 W 1/4 W 1/2 W 1W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 8 - 138 50 900 1900 2200 2400 3500 5000 L1 270 nH 56 nH 18 nH 18 nH 15 nH 8.2 nH 6.8 nH C1, C2 0.01 F 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC481ST89 / 481ST89E v02.0710 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Evaluation PCB List of Materials for Evaluation PCB 108324 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1, C2 Capacitor, 0402 Pkg. C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0603 Pkg. C5 2.2 F Capacitor, Tantalum R1 Resistor, 1210 Pkg. L1 Inductor, 0603 Pkg. U1 HMC481ST89 / HMC481ST89E PCB [2] 107368 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 139 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC481ST89ETR HMC481ST89E HMC481ST89