EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 1 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
Technical Data Sheet
White SMD Surface Mount Device
67-21UWC/S400-XX/TR8
Features
Fluorescence Type
High Luminous Intensity
High Efficiency
Emission Color:x=0.29,y=0.30
Descriptions
The white LED which was fabricated using
a blue LED and a phosphor, and the
phosphor is excited by blue light and emits
yellow fluorescence. The mixture of blue
light and yellow light results in a white
emission.
Applications
OA Equipment
Backlighting of Full Color LCD
Automotive Equipment
Replacement of Conventional Light
Bulbs and Fluorescent Lamps
Device Selection Guide
Chip
Material Emitted Color Lens Color
InGaN White Water Clear
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 2 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Package Dimensions
+
For reflow soldering (propose)
L
C
L
C
-
Polarity
Notes: .All dimensions are in millimeters
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 3 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Absolute Maximum Ratings (Ta=25)
Parameter Symbol Rating Units
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Operating Temperature Topr -40 ~ +85
Storage Temperature Tstg -40 ~ +100
Soldering Temperature Tsol 260 (for 5
seconds)
Power Dissipation Pd 110 mW
Electrostatic Discharge ESD 150 V
Peak Forward Current
(Duty 1/10 @1KHz) IFP 100 mA
Electro-Optical Characteristics (Ta=25)
Parameter Symbol
*Chip
Rank Min. Typ. Max. Units Condition
Luminous Intensity IV
IF=20mA
Forward Voltage VF IF=20mA
Reverse Current IR VR=5V
Viewing Angle 21/2 IF=20mA
Chromaticity x
IF=20mA
Coordinates y
IF=20mA
*67-21UWC/S400-XX/TR8
Chip Rank
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 4 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Color Ranks
Rank A0 Rank B1
x 0.280 0.264 0.283 0.296 x 0.287 0.283 0.330 0.330
y 0.248 0.267 0.305 0.276 y 0.295 0.305 0.360 0.339
Rank B2 Rank C0
x 0.296 0.287 0.330 0.330 x 0.330 0.330 0.361 0.356
y 0.276 0.295 0.339 0.318 y 0.318 0.360 0.385 0.351
CIE Chromaticity Diagram
*The C.I.E. 1931 chromaticity diagram ( Tolerance 0.02).
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 5 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Typical Electro-Optical Characteristics Curves
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 6 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Chromaticity Coordinates
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 7 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel.
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag LabelDesiccant
Label
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 8 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 2605
Min. 5sec. 6 min 22 PCS. 0/1
2 Temperature Cycle
H : +100 15min
5 min
L : -40 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100 5min
10 sec
L : -10 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 9 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 605 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280 for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
EVERLIGHT ELECTRONICS CO.,LTD.
verlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 10 of 10
Device No. : DSE-671-215 ECN:03.08.2004 Prepared by: Teresa
67-21UWC/S400-XX/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
E
VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
