> Product Overview Mindspeed's family of 4.25 Gbps backplane signal conditioners feature small form factor, low power devices that enable data transmission over long backplanes at speeds up to 4.25 Gbps. Mindspeed's Amplif-EyeTM signal conditioning technology enables transmission of 4.25 Gbps data over significant distances while traversing two backplane connectors. These products are specifically designed to operate in environments that suffer from both loss and reflection. Each device channel features an independent equalizer and driver with programmable output swing and de-emphasis to maximize power efficiency. Virtually any digital protocol can be transmitted through the devices at speeds from 50 Mbps to 4.25 Gbps. The list of supported protocols includes: PCI Express, SATA, SAS, Infiniband, 2 x XAUI and Fibre Channel. Mindspeed's backplane signal conditioners are designed to recognize and transparently relay out-of-band (OOB) signals for SATA/SAS and PCI Express. All devices include fully non-blocking switch matrices that allow for simple switching as well as multi-cast functionality. Matrices can also be configured as failover switches. All devices operate from -20 to +85C. Devices can either be configured via a 2 wire interface or EPROM. Features Benefits >> Fully non-blocking switch matrices Ultimate flexibility for switching and copying signals >> SMPTE 424M, 344M, 292M, 259M, and DVB-ASI compatible Robust video compatibility >> Input equalization and output de-emphasis available Maximizes transmission length >> Low power usage per channel Minimizes cost to operate and cool >> Small QFN packages Provides space efficiency and reliability >> Out of band signaling support Allows for seamless integration into PCIe, SATA and SAS >> Protocol agnostic One device supports multiple applications >> 1.2 Volt core / optional 1.2 or 1.8 Volt IO Flexibility to use right power performance >> Extended temperature range (-20 to 85 C) Provides additional margin for most applications >> Data rate independent Operates to 4.25 Gbps, no reference clock required M21351 M21352 M21353 Switch Matrix 4x4 8x8 12x12 Power (mW) at 1.2V 580 920 1300 6x6 10x10 12x12 40 pin QFN 72 pin QFN 88 pin QFN Adaptive Program Program Package (mm) EQ Control Type Product Brief M21351/2/3 4.25 Gbps Backplane Signal Conditioners Fig. 1 - Product Selector Table Mindspeed Signal Integrity (R) Fig. 2 - Mindspeed Signal Integrity > Copy Target A Switch Source Target B Note: M21353 supports 3 instances of configuration shown M21353 Failover Mode Backplane Switch Cards / Disk Drives Fig. 3 - M21353 Application Diagram: Failover / Redundancy Switch > Product Features ** Protocol agnostic ** Supports SMPTE 424M, 344M, 292M, and 259M, DVB-ASI ** Supports rates from 50 Mbps to 4.25 Gbps ** Transparently relays OOB/EBI ** Extended temperature range -20 to +85C ** Boundary scan ** 1.2V core ** 1.2V or 1.8V IO option 6 dB Prog De-emph 16 dB EQ Non - Blocking Switch Matrix Fig. 4 - M21451/2/3 Device Architecture Applications ** Backplane equalizer / driver ** SDI video and DVB-ASI equipment ** SATA / SAS redundancy switch ** Blade server board to board interconnect ** Infiniband reach extension ** PCI Express failover switch Fig. 5 - 4.25 Gbps Equalized After 40" Trace For more product information, please visit www.mindspeed.com. www.mindspeed.com/salesoffices (c) 2010 Mindspeed Technologies, Inc. All rights reserved. Mindspeed and the Mindspeed logo are General Information: (949) 579-3000 trademarks of Mindspeed Technologies, Inc. All other trademarks are the property of their respective Headquarters - Newport Beach 4000 MacArthur Blvd., East Tower Newport Beach, CA 92660-3007 M21351-2-3-BRF-001-D.pdf owners. Although Mindspeed Technologies, Inc. strives for accuracy in all its publications, this material may contain errors or omissions and is subject to change without notice. This material is provided as is and without any express or implied warranties, including merchantability, fitness for a particular purpose and non-infringement. Mindspeed Technologies, Inc. shall not be liable for any special, indirect, incidental or consequential damages as a result of its use.