CSMXS3DSE76
1
Round Water-resistant Connectors (M8/S8)
XS3
Small Round Water-resistive
Connectors
• Water-resistive, compact connector meets IP67 requirements.
• Conventional M8 screw-on models are available along with S8
snap-in models that connect and disconnect with one touch.
• Ideal for a wide variety of FA and OA applications.
• Connectors on both cable ends require no harness work.
• Some new M8 models with 3 or 5 poles.
• Oil-resistant Polyurethane Robot Cables added.
• M8-M12 conversion cables are also available.
Model Number Legend
Connectors with Cables Model Number Legend
Note: Only DC, straight, and 4-core types are shown in this table. Refer to the relevant pages for other products.
Connector Cable specifications XS3: M8 screw connection
Cable length (m) Model Reference page
Connectors on both cable ends
Robot cable
1 XS3W-M421-401-R
4
2 XS3W-M421-402-R
5 XS3W-M421-405-R
Oil-resistant (PUR) robot
cable
1 XS3W-M421-401-PR
2 XS3W-M421-402-PR
5 XS3W-M421-405-PR
Connector on one cable end
(Socket)
Standard cable
2 XS3F-M421-402-A
9
5 XS3F-M421-405-A
10 XS3F-M421-410-A
Robot cable
1 XS3F-M421-401-R
2 XS3F-M421-402-R
5 XS3F-M421-405-R
10 XS3F-M421-410-R
Oil-resistant (PUR) robot
cable
2 XS3F-M421-402-PR
5 XS3F-M421-405-PR
PUR (low-temperature use)
cable
2 XS3F-M421-402-L
5 XS3F-M421-405-L
Connector on one cable end
(Plug)
Robot cable 0.3 XS3H-M421-4C3-R
14
1 XS3H-M421-401-R
Oil-resistant (PUR) robot
cable
2 XS3H-M421-402-PR
5 XS3H-M421-405-PR
Refer to Safety Precautions on page 24.
2
XS3
Ratings and Specifications
*1. Models with cable only
*2. Except 5 poles
*3. Use the robot cable within a temperature range between 0°C and 70°C to prevent the wires inside the cable from being broken when bending it.
Materials and Finish
Connector
*Except 5 poles
Note: The XS3M is for both M8 and S8.
Cables
Note: Only the XS3F (socket) is available with 5 poles.
Pin Arrangement (Engaged Side)
Item Model XS3F/H/W/P/M XS3F-M52@-5@@-A XS3M-M524-1@XS3R
Rated current 1 ADC 3 ADC 1 ADC
Rated voltage 125 VDC *2 30 VDC 125 VDC
Contact resistance
(connector)
40 m max. (20 mV max., 100mA max.) 60 m max.
(20 mV max., 100 mA max.)
Insulation
resistance 1,000 M min. (at 500 VDC)
Dielectric strength
(connector)
1,000 VAC for 1 min
(leakage current: 1 mA
max.)
650 VAC for 1 min (leakage current: 1 mA max.)
1,000 VAC for 1 min
(leakage current: 1 mA
max.)
Degree of
protection IP67 (IEC60529)
Insertion tolerance 200 times
Cable tensile
strength *1 49 N/15 s
Ambient operating
temperature range −25 to 70°C *3 −25 to 85°C −25 to 70°C
Ambient humidity
range 20 to 85%RH
Type M8 S8
Item Model
XS3F/H/W/R XS3P/M * XS3M-M524-1
@
XS3F/W (Socket side)
XS3H/W (Plug side)
XS3P
Contact block
PBT resin (UL94 V-0) light gray or black
Contacts
Phosphor bronze/nickel
base, 0.4-μm gold plating
Brass/nickel base,
0.4-μm gold plating
Phosphor bronze/nickel
base, 0.4-μm gold plating
Brass/nickel base,
0.4-μm gold plating
Fixture Brass/nickel plating or SUS316L —
Brass/nickel plating
—
Body —Brass/
nickel plating
Nickel-plated zinc
alloy —
Shell —TPEE
C-Ring —Phosphor bronze/
tin plating —
Grounding fixture —Phosphor bronze/
tin plating —
Nut — Brass/nickel plating —
Brass/nickel plating
Cover Soft PBT resin
(UL94V-0) —TPEE —
O-ring Rubber
Item Poles 3 poles 4 poles 5 poles
Standard cable 4 mm dia, AWG24 (0.2 mm2)
Structure: 0.12 mm/18
4.7 mm dia, AWG24 (0.2 mm2)
Structure: 0.16 mm/11
Robot Cable 4 mm dia, AWG24 (0.2 mm2)
Structure: 0.08 mm/40 —
Oil-resistant polyurethane
robot cable —4.7 mm dia, AWG22 (0.3 mm2)
Structure: 0.08 mm/60 —
Item Poles 3 poles 4 poles 5 poles
DC
Male (plug)
contacts
Female
(socket)
contacts
13
4
1
2
3
4
13
24
5
31
4
3
4
1
2
31
42
5
XS3
3
XS3W
Connectors with Cables, Connectors on Both Cable Ends (Socket/Plug)
Model Number Legend
Use this model number legend to identify products from their model number. Use this model number legend to identify products
from their model number. When ordering, use a model number from the table in Ordering Information.
XS3W-@@2@-@@@-@
Ordering Information
M8 Screw-on Connectors
1. Fastening
Method
M: M8
S: S8
2. Connector
Poles
3: 3 poles
4: 4 poles
3. Cable Connection
Direction
1: Straight/Straight
2: Right-angle/Right-angle
3: Straight (socket)/
Right-angle (plug)
4: Right-angle (socket)/
Straight (plug)
4. Connections
Pin No.
➀ ➂ ➃
3: Brown Blue Black
Pin No.
➀ ➁ ➂ ➃
4: Brown White Blue Black
5. Cable Length
01: 1 m
02: 2 m
05: 5 m
6. Cable Specifications
R: Vibration-proof robot cable
PR: Oil-resistant polyurethane
robot cable
31562 4
Cable specifications No. of cable cores Cable connection direction Cable length L (m) Model
Vibration-proof robot
cable
3
Straight/Straight
1XS3W-M321-301-R
2XS3W-M321-302-R
5XS3W-M321-305-R
4
Straight/Straight
1XS3W-M421-401-R
2XS3W-M421-402-R
5XS3W-M421-405-R
Right-angle/Right-angle 2XS3W-M422-402-R
5XS3W-M422-405-R
Straight (Socket)/Right-angled (Plug) 2XS3W-M423-402-R
5XS3W-M423-405-R
Right-angle (socket)/Straight (plug) 2XS3W-M424-402-R
5XS3W-M424-405-R
Oil-resistant
polyurethane robot cable 4
Straight/Straight
1XS3W-M421-401-PR
2XS3W-M421-402-PR
5XS3W-M421-405-PR
Right-angle/Right-angle
1XS3W-M422-401-PR
2XS3W-M422-402-PR
5XS3W-M422-405-PR
Straight (Socket)/Right-angled (Plug)
1XS3W-M423-401-PR
2XS3W-M423-402-PR
5XS3W-M423-405-PR
Right-angle (socket)/Straight (plug)
1XS3W-M424-401-PR
2XS3W-M424-402-PR
5XS3W-M424-405-PR
4
XS3
S8 Snap-in Connectors
Note: Ask your OMRON representative about other cable lengths.
Wiring Diagram/Engaged Side
Mating Connectors
Note 1. Cables can be extended with more than one XS3W.
2. M8 screw models and S8 snap-in models cannot be connected to each other.
Cable specifications No. of cable cores Cable connection direction Cable length L (m) Model
Vibration-proof robot
cable 4
Straight/Straight
1XS3W-S421-401-R
2XS3W-S421-402-R
5XS3W-S421-405-R
Right-angle/Right-angle 2XS3W-S422-402-R
5XS3W-S422-405-R
Straight (Socket)/Right-angled (Plug) 2XS3W-S423-402-R
5XS3W-S423-405-R
Right-angle (socket)/Straight (plug) 2XS3W-S424-402-R
5XS3W-S424-405-R
Model Socket side Plug side
XS3W (M8) XS3M (M8/S8)
XS3H (M8)
XS3F (M8)
XS3W (M8)
XS3P (M8)
XS3W (S8) XS3M (M8/S8)
XS3H (S8)
XS3F (S8)
XS3W (S8)
XS3P (S8)
1
2
3
4
1
2
3
4
White
Brown
Blue
Black
Pin No.
Socket Plug
Cable lead colors
1
3
4
1
3
4
Brown
Blue
Black
Pin No.
Socket Plug
Cable lead colors
3 poles
4 poles
13
4
31
4
3
4
1
2
1
2
3
4
XS3
5
Dimensions (Unit: mm)
M8 Screw-on Connectors with Vibration-proof Robot Cable
M8 Screw-on Connectors with Oil-resistant Polyurethane Robot Cable
L
32
M8 × 1.0
31.4
4 dia.
10 dia.
Socket Plug
9 dia.
Straight/Straight Connectors
XS3W-M321-3@@-R (3-core)
XS3W-M421-4@@-R (4-core)
L
M8 × 1.0
23.1
21.1
31.4
4 dia.
10
dia.
9
dia.
Straight (Socket)/Right-angle (Plug) Connectors
XS3W-M423-4@@-R (4-core)
20.5
L
M8 × 1.0
23.1
21.1
23.1
4 dia.
10 dia.
9 dia.
Right-angle/Right-angle Connectors
XS3W-M422-4@@-R (4-core)
20.5
L
32
M8 × 1.0
23.1
4 dia.
10
dia.
9
dia.
Right-angle (Socket)/Straight (Plug) Connectors
XS3W-M424-4@@-R (4-core)
L
32 31.4
M8 × 14.7 dia.
Molded part (black)
10 dia. 9 dia.
Straight/Straight Connectors
XS3W-M421-4@@-PR (4-core)
32
20.5
24.9
21.5
L
M8 × 14.7 dia.
Molded part (black)
10 dia.
9 dia.
Straight (Socket)/Right-angle (Plug) Connectors
XS3W-M423-4@@-PR (4-core)
20.5
24.924.9
L
21.1
M8 ×
1
4.7 dia.
Molded part (black)
10 dia.
9 dia.
Right-angle/Right-angle Connectors
XS3W-M422-4@@-PR (4-core)
24.9
31.4
21.1 21.5
L
M8 × 14.7 dia.
Molded part (black)
10 dia.
9 dia.
Right-angle (Socket)/Straight (Plug) Connectors
XS3W-M424-4@@-PR (4-core)
6
XS3
S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable
L
30.7
30.7
4 dia.
8.2 dia.
Socket Plug
8.2 dia.
Straight/Straight Connectors
XS3W-S421-4@@-R
30.7
L
19.8
23.1
4 dia.
8.2 dia.
8.2 dia.
Straight (Socket)/Right-angle (Plug) Connectors
XS3W-S423-4@@-R
19.8
23.1
L
19.8
23.1
4 dia.
8.2 dia. 8.2 dia.
Right-angle/Right-angle Connectors
XS3W-S422-4@@-R
L
23.1
19.8
30.7
4 dia.
8.2 dia.
8.2 dia.
Right-angle/Straight Connectors
XS3W-S424-4@@-R
XS3
7
XS3W
Connectors with Cables, Connectors on Both Cable Ends (M8 Socket/M12 Plug or M8 Plug/M12 Socket)
Model Number Legend
Use this model number legend to identify products from their model number. Use this model number legend to identify products
from their model number. When ordering, use a model number from the table in Ordering Information.
XS3W-M@2@-@C2-A
Ordering Information
Wiring Diagram
1. Fastening
Method
M: M8
2. Connector
Poles
3: 3 poles
4: 4 poles
3. Cable Connection
Direction
C: M8 (screw-on) socket:
Straight, M12 (Smartclick)
plug: Straight
D: M8 (screw-on) plug:
Straight, M12 (Smartclick)
socket: Straight
4. Connections
Pin No.
➀ ➂ ➃
3: Brown Blue Black
Pin No.
➀ ➁ ➂ ➃
4: Brown White Blue Black
5. Cable Length
C2: 20 cm
6. Cable Specifications
A: Standard cable
Cable specifications No. of cable cores Connectors
Cable length L (m)
Model
Standard cable
3M8 socket/M12 plug
0.2
XS3W-M32C-3C2-A
M8 plug/M12 socket XS3W-M32D-3C2-A
4M8 socket/M12 plug XS3W-M42C-4C2-A
M8 plug/M12 socket XS3W-M42D-4C2-A
3152 4
1
2
3
4
1
2
3
4
Pin No.
Cable lead
colors
Brown
White
Blue
Black
1
3
4
1
3
4
Pin No.
Cable lead
colors
Brown
Blue
Black
3 poles 4 poles
6
8
XS3
Dimensions (Unit: mm)
Screw-on Connectors (M8 to M12)
Smartclick Connectors (M8-M12)
Note: For 3-core, M12 connectors, pin 2 is not connected internally.
XS3W-M32C-3C2-A
XS3W-M42C-4C2-A
14.9 dia.
4 dia.
9 dia.
M8 × 1.0
M8 × 1.0
31.4
200
M12 × 1.0
44.7
13
4
13
42
2
43
1
Plug Socket
(3 cores)
(4 cores)
XS3W-M32D-3C2-A
XS3W-M42D-4C2-A
14.9 dia.
4 dia.
10 dia.
M8 × 1.0
M8 × 1.0
32
200
M12 × 1.0
40.7
31
4
31
24
12
43 PlugSocket
(3 cores)
(4 cores)
FortheM12connectors,one-touch(Smartclick)connectorsthat
arecompatiblewithpreviousscrew-onM12connectorsareused.
RefertoyourOMRONwebsitefordetails.
XS5 Series
Click!
Insert fully.
Rotate 1/8 turn.
One-touch Connection
XS3
9
XS3F
Connectors with Cables, Sockets on One Cable End
Model Number Legend
Use this model number legend to identify products from their model number. When ordering, use a model number from the table
in Ordering Information.
XS3F-@@2@-@@@-@
1. Fastening Method
M: M8
S: S8
E: M8
SUS316L Lock
2. Connector Poles
3: 3 poles
4: 4 poles
5: 5 poles
3. Cable Connection Direction
1: Straight
2: Right-angle
4. Connections
Pin No.
➀ ➂ ➃
3: Brown Blue Black
Pin No.
➀ ➁ ➂ ➃
4: Brown White Blue Black
Pin No.
➀ ➁ ➂ ➃ ➄
5: Brown White Blue Black Gray
5. Cable Length
01: 1 m
02: 2 m
05: 5 m
10: 10 m
6. Cable Specifications
A: Standard cable
L: PUR cable (low-temperature use)
R: Vibration-proof robot cable
PR: Oil-resistant polyurethane robot cable
21 3 4 65
10
XS3
Ordering Information
M8 Screw-on Connectors
S8 Snap-in Connectors
Note: Ask your OMRON representative about other cable lengths.
Cable specifications No. of cable cores Cable connection direction Cable length L (m) Model
Standard cable
3
Straight 2XS3F-M321-302-A
5XS3F-M321-305-A
Right-angle 2XS3F-M322-302-A
5XS3F-M322-305-A
Vibration-proof robot cable
Straight
1XS3F-M321-301-R
2XS3F-M321-302-R
5XS3F-M321-305-R
10 XS3F-M321-310-R
Right-angle 2XS3F-M322-302-R
5XS3F-M322-305-R
Standard cable
4
Straight
2XS3F-M421-402-A
5XS3F-M421-405-A
10 XS3F-M421-410-A
Right-angle
2XS3F-M422-402-A
5XS3F-M422-405-A
10 XS3F-M422-410-A
Standard SUS316L cable
lock
Straight 2XS3F-E421-402-A
5XS3F-E421-405-A
Right-angle 2XS3F-E422-402-A
5XS3F-E422-405-A
Vibration-proof robot cable
Straight
1XS3F-M421-401-R
2XS3F-M421-402-R
5XS3F-M421-405-R
10 XS3F-M421-410-R
Right-angle
1XS3F-M422-401-R
2XS3F-M422-402-R
5XS3F-M422-405-R
10 XS3F-M422-410-R
Oil-resistant polyurethane
robot cable
Straight 2XS3F-M421-402-PR
5XS3F-M421-405-PR
Right-angle
1XS3F-M422-401-PR
2XS3F-M422-402-PR
5XS3F-M422-405-PR
PUR cable
(low-temperature use)
Straight 2XS3F-M421-402-L
5XS3F-M421-405-L
Right-angle 2XS3F-M422-402-L
5XS3F-M422-405-L
Standard cable 5
Straight
2XS3F-M521-502-A
5XS3F-M521-505-A
10 XS3F-M521-510-A
Right-angle
2XS3F-M522-502-A
5XS3F-M522-505-A
10 XS3F-M522-510-A
Cable specifications No. of cable cores Cable connection direction Cable length L (m) Model
Vibration-proof robot cable 4
Straight
1XS3F-S421-401-R
2XS3F-S421-402-R
5XS3F-S421-405-R
Right-angle
1XS3F-S422-401-R
2XS3F-S422-402-R
5XS3F-S422-405-R
XS3
11
Mating Connectors
Note: M8 screw models and S8 snap-in models cannot be connected to each other.
Dimensions (Unit: mm)
M8 Screw-on Connectors (3-core)
M8 Screw-on Connectors (4-core)
Model Mating Connectors
XS3F (M8) XS3M (M8/S8), XS3H (M8), XS3W (M8)
XS3F (S8) XS3M (M8/S8), XS3H (S8), XS3W (S8)
4 dia.
L50
20.5
9 dia.
23.1
4
3
1
M8 × 1.0 1.75
3.5
30 5
Right-angle Connectors
XS3F-M322-3@@-A Vibration-proof robot cable
XS3F-M322-3@@-R Standard cable
1
3
4
Brown
Blue
Black
Pin No. Cable lead colors
4 dia.
4
31
M8 × 1.0
1.75
3.5
9 dia.
31.4
21.5
L
30
50
5
Straight Connectors
XS3F-M321-3@@-A Vibration-proof robot cable
XS3F-M321-3@@-R Standard cable
Wiring Diagram
1.95
0.5
3.4
2.15
L
30
50
5
20.5
23.1
4 dia.
9 dia.
M8 × 1.0
21
43
1
2
3
4
White
Brown
Blue
Black
Cable lead colors
Pin No.
1.95 0.5
4 2
3 1
3.4
2.15 M8 × 1.0
L
31.4
21.5
12.9
30
50
5
4 dia.
9 dia.
Straight Connectors
XS3F-M421-4@@-A Vibration-proof robot cable
XS3F-M421-4@@-R Standard cable
Right-angle Connectors
XS3F-M422-4@@-A Vibration-proof robot cable
XS3F-M422-4@@-R Standard cable
Wiring Diagram
12
XS3
M8 SUS316L Lock (4-core)
M8 Screw-on Connectors (4-core)
4 dia.
1.95
0.5
3.4
2.15
L
30
50
5
20.5
9 dia.
23.1
M8 × 1.0
21
43
Straight Connectors
XS3F-E421-402-A
XS3F-E421-405-A
Right-angle Connectors
XS3F-E422-402-A
XS3F-E422-405-A
1
2
3
4
White
Brown
Blue
Black
Cable lead colors
Pin No.
4 dia.
9 dia.
1.95 0.5
42
31
3.4
2.15 M8 × 1.0
L
31.4
21.5
12.9
30
50
5
Wiring Diagram
Right-angle Connectors
Oil-resistant polyurethane robot cable
XS3F-M422-4@@-PR
PUR cable
XS3F-M422-4@@-L
L
0.5
1.95
2.15 3.4
4.7 dia.
5
50
24.9
20.5
9 dia.
3
4
21
Molded part (black)
M8 × 1
1
2
3
4
White
Brown
Blue
Black
Cable lead colors
Pin No.
5
50
4.7 dia.
M8 ×
1
4
31
2
9 dia.
31.4
L
Straight Connectors
Oil-resistant polyurethane robot cable
XS3F-M421-4@@-PR
PUR cable
XS3F-M421-4@@-L
Wiring Diagram
XS3
13
M8 Screw-on Connectors (5-core) Oil-resistant Standard Cable
S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable
20.5
4.7 dia.
L
50
5
M8 × 1.0
9 dia.
24.9
30
1.45
1.35
0.35
4
2
3
5
1
1.95
3.4
4.7 dia.
L
31.4
21.5
50
5
M8 × 1.0
9 dia.
30
1.45
1.35 0.35
42
35
1
3.4
1.95
Right-angle Connectors
XS3F-M522-5@@-A
1
23
5
4
Cable lead colors
Pin No.
Blue
Gray
Black
Brown
White
Straight Connectors
XS3F-M521-5@@-A
Wiring Diagram
1.95 0.5
4 2
3 1
3.4
2.15
L
30.7
21.1
13.9
30
50
5
4 dia.
8.2
dia.
1.95
0.5
3.4
2.15
L
30
50
5
19.8
23.1
4 dia.
8.2 dia.
21
43
Straight Connectors
XS3F-S421-4@@-R
Right-angle Connectors
XS3F-S422-4@@-R
1
2
3
4
White
Brown
Blue
Black
Cable lead colors
Pin No.
Wiring Diagram
14
XS3
XS3H Plugs on One Cable End
Model Number Legend
Use this model number legend to identify products from their model number. When ordering, use a model number from the table
in Ordering Information.
XS3H-@@2@-@@@-@
Ordering Information
M8 Screw-on Connectors
Note: Ask your OMRON representative about other cable lengths.
S8 Snap-in Connectors
Mating Connectors
Note: M8 screw models and S8 snap-in models cannot be connected to each other.
1. Fastening Method
M: M8
S: S8
2. Connector Poles
3: 3 poles
4: 4 poles
3. Cable Connection Direction
1: Straight
2: Right-angle
4. Connections
Pin No.
➀ ➂ ➃
3: Brown Blue Black
Pin No.
➀ ➁ ➂ ➃
4: Brown White Blue Black
5. Cable Length
C3: 0.3 m
01: 1 m
02: 2 m
05: 5 m
6. Cable Specifications
R: Vibration-proof robot cable
PR: Oil-resistant polyurethane robot cable
Cable specifications
No. of cable cores
Cable connection direction
Cable length L (m)
Model
Vibration-proof robot cable
3 Straight 0.3 XS3H-M321-3C3-R
1XS3H-M321-301-R
4
Straight 0.3 XS3H-M421-4C3-R
1XS3H-M421-401-R
Right-angle 0.3 XS3H-M422-4C3-R
1XS3H-M422-401-R
Oil-resistant polyurethane
robot cable 4
Straight 2XS3H-M421-402-PR
5XS3H-M421-405-PR
Right-angle
1XS3H-M422-401-PR
2XS3H-M422-402-PR
5XS3H-M422-405-PR
Cable specifications
No. of cable cores
Cable connection direction
Cable length L (m)
Model
Vibration-proof robot cable 4
Straight 0.3 XS3H-S421-4C3-R
1XS3H-S421-401-R
Right-angle 0.3 XS3H-S422-4C3-R
1XS3H-S422-401-R
Model Mating Connectors
XS3H (M8) XS3F (M8), XS3W (M8), XS3P (M8)
XS3H (S8) XS3F (S8), XS3W (S8), XS3P (S8)
1 3 62 45
XS3
15
Dimensions (Unit: mm)
M8 3 pin Screw-on Connectors with Vibration-proof Robot Cable
M8 4 pin Screw-on Connectors with Vibration-proof Robot Cable
4 dia.
M8 × 1.0
10 dia.
4
3
1
1.75
3.5 32
21.5
L
30
50
5
Straight Connectors
XS3H-M321-3@@-R
1
3
4
Blue
Black
Brown
Cable lead colors
Pin No.
Wiring Diagram
1.95
0.5
3.4
2.15
L
30
50
5
20.1
23.1
43
21
4 dia.
Four, 1 dia.
10 dia.
M8 × 1.0
Straight Connectors
XS3H-M421-4@@-R
Right-angle Connectors
XS3H-M422-4@@-R
1
2
3
4
White
Brown
Blue
Black
Cable lead colors
Pin No.
1.95 0.5
2 4
1 3
3.4
2.15
L
32
21.5
12.9
M8 × 1.0
30
50
5
4 dia.
10 dia.
F
our, 1
di
a.
Wiring Diagram
16
XS3
M8 4 pin Screw-on Connectors with Oil-resistant Polyurethane Robot Cable
S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable
2.15
0.5
1.95
3.4
43
1
2
M8 × 1
21.1
24.9
L
5
50
4.7 dia.
Molded part (black)
10 dia.
Four, 1 dia.
5
50
32
L
2.15
0.5
1.95
3.4
4
3
1
2
4.7 dia.
Four, 1 dia.
10 dia.
M8 × 1.0
1
2
3
4
White
Brown
Blue
Black
Cable lead colors
Pin No.
Straight Connectors
XS3H-M421-4@@-PR
Right-angle Connectors
XS3H-M422-4@@-PR
Wiring Diagram
1.95 0.5
2 4
1 3
3.4
2.15
L
30.7
21.1
13.9
30
50
5
4 dia.
8.2 dia.
Four, 1 dia.
43
21
1.95
0.5
3.4
2.15
L
30
50
5
19.8
23.1
4 dia.
8.2 dia.
Four, 1 dia.
Straight Connectors
XS3H-S421-4@@-R
Right-angle Connectors
XS3H-S422-4@@-R
1
2
3
4
White
Brown
Blue
Black
Cable lead colors
Pin No.
Wiring Diagram
XS3
17
XS3P
Panel-mounting Sockets for Terminal Boxes
Ordering Information
Note: Orders are accepted in multiples of the minimum order.
Mating Connectors
Note: M8 screw models and S8 snap-in models cannot be connected to each other.
Dimensions (Unit: mm)
M8 Screw-on Connectors
Connection method Panel mounting Pin shape Applicable wires Model
M8 screw-on Front lock or rear lock DIP pins — XS3P-M421-1
Solder cup pins AWG24 max. XS3P-M421-2
Rear lock Solder cup pins AWG24 max. XS3P-M422-2
S8 snap-in Front lock or rear lock DIP pins — XS3P-S421-1
Solder cup pins AWG24 max. XS3P-S421-2
Model Mating Connectors
XS3P (M8) XS3H (M8), XS3W (M8)
XS3P (S8) XS3H (S8), XS3W (S8)
XS3P-M421-1 (DIP Pins)
Front lock or rear lock
XS3P-M421-2 (Solder Cup Pins)
Front lock or rear lock
XS3P-M422-2 (Solder Cup Pins),
Rear Lock Slim Models
16
1.95 0.5
1.8 24.9
12.5 7.2
7.2
1.5
2.5
M12 × 1.0 M12 × 1.0
2.15
3.4
9.4
1.95
0.5
2.15
M8 × 1.0
3.4
9.7
18 dia.
M12 × 1.0 nut Rubber
bushing
Four, 1 dia.
16
1.95 0.5
1.8 24.3
12.5 7.2
7.2
1.5
2.5
M12 × 1.0
M12 × 1.0
2.15
3.4
9.4
1.95
0.5
2.15
M8 × 1.0
3.4
9.7
18 dia.
M12 × 1.0 nut Rubber
bushing
1.2 dia.
Solder cup
hole
0.8 dia. × 2.5
7
2
M8 × 0.5
M8 × 0.5 nut
6
13.2 (0.3)
11.5 dia.
3.4
2.15
M8 × 1.0
1.95
2
10
Rubber
bushing 10
18
XS3
S8 Snap-in Connectors
Mounting Dimensions for XS3P Screw-on Models and Snap-in Models (Unit: mm)
Safety Precautions
Refer to Safety Precautions on page 24.
Panel-Mounting
When mounting XS3P Panel-mounting Connectors to
panels, refer to Panel-mounting Dimensions and provide
rubber bushings and nuts for the Connectors. Apply a
tightening torque of between 0.4 and 0.6 N·m to mount the
Connectors.
XS3P-S421-1 (DIP Pins)
Front lock or rear lock
XS3P-S421-2 (Solder Cup Pins)
Front lock or rear lock
Panel Cutout
XS3P-@421-@
Note: The panel thickness is 1 to 3 mm.
XS3P-M422-2
PCB-mounting Dimensions
Note: The panel thickness is 2.4 mm
maximum.
Panel-mounting
Dimensions
Rear lock Front Lock
Precautions for Correct Use
16
1.95 0.5
1.8 24.9
12.5 7.2
7.2
1.5
2.5
M12 × 1.0 M12 × 1.0
2.15
3.4
9.4
1.95
0.5
2.15
3.4
9.5
18 dia.
M12 × 1.0 nut Rubber
bushing
Four, 1 dia.
16
1.95 0.5
1.8 24.3
12.5 7.2
7.2
1.5
2.5
M12 × 1.0
2.15
3.4
9.4
1.95
0.5
2.15
3.4
9.5
M12 × 1.0
18 dia.
M12 × 1.0 nut Rubber
bushing
1.2 dia.
Solder cap
hole
0.8 dia. × 2.5
9.8+0.2
0
24 min.
12
+0.2
0
dia.
7.2+0.2
0
8.2+0.2
0
1.950.5
2.15
3.4
Land
24 min.
Four, 1.2 dia.
Panel
Nut Rubber
bushing
Panel
Nut
Rubber
bushing
XS3
19
XS3M Sensor-Embedded Plugs
Ordering Information
Mating Connectors
Note: The plug can be connected to both M8 screw and S8 snap-in models.
Dimensions (Unit: mm)
Embedded Plug with Screw Threads
Mounting method Pin shape Applicable wires Model
Embedded model DIP pins
—XS3M-K421-1
Solder cup pins AWG26 max.
XS3M-K421-2
Model Mating Connectors
XS3M XS3F (M8/S8), XS3W (M8/S8)
7.2 (min)
1.95
0.5
3.4
2.15
4 2
3 1
2
3 3
6.75
10.3 3.6
0.4
M8 × 1.0
2 4
1 3
Four, 1 dia.
6.5 dia.
5.8
±0.2 dia.
5.6 dia.
1 dia.
5.8 dia. 6.5 dia. 6.9 dia.
Four, 1 dia.
Resin
filled
5.8+0.05
0 dia.
5.2 (min)
1.95
0.5
3.4
2.15
4 2
3 1
2
3 3
6.75
10.3 1.7
0.4
M8 × 1.0
2 4
1 3
Four, 1 dia.
6.5 dia. 5.8±0.2 dia.
5.6 dia.
1 dia.
5.8 dia. 6.5 dia. 6.9 dia.
Four, 1 dia.
Resin
filled
Solder cup hole
0.7 dia. × 1.7
5.8
+0.05
0
dia.
DIP Pins
XS3M-K421-1
Solder Cup Pins
XS3M-K421-2
Mounting
Mounting
20
XS3
XS3M Panel-mounting Plugs
Ordering Information
Mating Connectors
Dimensions (Unit: mm)
Front lock (5 pins)
Mounting method Pin shape Shield pin Applicable wires Model
Front Lock
DIP pins 4.5 mm
(for either round holes or solder cups)
No AWG26 max. XS3M-M524-10
Yes XS3M-M524-11
Model Mating Connectors
XS3M-M524-1@XS3F-M52@-5@@-A
SW10
SW7
1.95
3.4
7.05
(2.5)
6 min.
12
5-4.5
Panel location (example for t = 2.0)
8.2 mm dia.+0.1
0 7.1+0.1
0
11.9 dia.
SW11
1.95
3.4
1.45
1.35 0.35
Five, 1.7 dia. lands
Five, 1.2 dia.
1
2
3
4
5
Pin Numbers
0.35
1.35
1.45
2-1.45
1.35
3.4
1.95
2-0.35
5-1 dia.
O-ring on panel side*
O-ring on panel side*
M8 × 1.0
Panel Cutout PCB-mounting Dimensions
DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), Without Shield Pin
XS3M-M524-10
Panel Cutout PCB-mounting Dimensions
SW10
SW7
1.95
O-ring on panel side*
O-ring on panel side*
3.4
7.05 2-4.5
(2.5)
6 min.
12 5-4.5
Panel location (example for t = 2.0)
10.4
11.9 dia.
SW11
1.95
3.4
1.45
1.35 0.35
Five, 1.7 dia. lands
Five, 1.2 dia. 4-R0.6
4-R0.35
Two, 1.2 lands
Two, 3.8
lands
Two, 3.3
lands
2-0.7
1
2
3
4
5
Pin Numbers
0.35
1.35
1.45
2-1.45
1.35
3.4
1.95
10.4
2-0.35
5-1 dia.
2-2.6
8.2 mm dia.
+0.1
0
7.1
+0.1
0
M8 × 1.0
DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), With Shield Pin
XS3M-M524-11
*The O-ring on the panel side maintains a
waterproof structure (IP67) between the
panel and Connector.
Note: The panel thickness
is 0.8 to 2 mm.
Note: The panel thickness is
2.4 mm maximum.
Note: The panel thickness is 0.8 to 2 mm.
Note: The panel thickness is 2.4 mm maximum.
*The O-ring on the panel side maintains a
waterproof structure (IP67) between the
panel and Connector.
XS3
21
Safety Precautions
Refer to Safety Precautions on page 24.
XS3M-M524-@@ Connection
To mate the Connectors, align the mating marks on the Plug
and Socket (see following figure), insert the Connectors
completely, and tighten the lock nut, being careful not to
damage the threads.
XS3M-M524-@@ Panel Mounting
After you mount the Connector to the panel, attach the nut and
tighten it to a suitable torque (0.4 N·m).
Precautions for Correct Use
Mating marks
Socket
Plug
22
XS3
XS3R Y-Joint Plug/Socket Connectors
Dimensions (Unit: mm)
M8 Screw-on Connectors
Wiring Diagram
XS3R-M426-1@@1-A XS3R-M426-1@@0-A XS3R-M426-1 XS3R-M426-5
Ordering Information
For M8 Connectors
Cable Connector
Cable length
L (m)
Model
With cable
Connectors on
both cable ends
0.5 XS3R-M426-1C51-A
1XS3R-M426-1011-A
2XS3R-M426-1021-A
3XS3R-M426-1031-A
Connector on
one cable end
2XS3R-M426-1020-A
5XS3R-M426-1050-A
Without
cable
Connectors on
both cable ends --- XS3R-M426-1
XS3R-M426-5
Mating Connectors
Model Mating Connectors
XS3R (M8)
XS3F (M8)
XS3H (M8)
XS3W (M8)
XS3P (M8)
Connectors on Both Cable Ends (Y-Joint Plug/Socket)
XS3R-M426-1@@1-A
Connector on One Cable End (Y-Joint Plug/Socket)
XS3R-M426-1@@0-A
Connector on Both Ends (Y-Joint Plug/Socket) without Cable
XS3R-M426-@
23
10.5
31
24
12
CN1
CN2
12.5
16.4
4
32
L
CN0
2
2
4
4
1
1
3
3
Socket
Plug
4 dia.
5.6 dia.
3.5 dia.
10 dia.
M8 × 1.0
M8 × 1.0
9 dia.
9 dia.
23
10.5
16.4
4
12
L50
30 5
2
2
4
4
1
1
3
3
Socket
4 dia.
5.6 dia.
3.5 dia.
M8 × 1.0
CN1
CN2
12.5
9 dia.
9 dia.
16.4
4
12
4
3
1 2
37.2
23
10.5
2
2
4
4
1
1
3
3
Socket
Plug
3.5 dia.
M8 × 1.0
M8 × 1.0
CN1
CN2
CN0
12.5 10 dia.
9 dia.
9 dia.
4
3
2
1
CN2
CN1
CN0
4
3
2
11
2
3
4
CN2
CN1
4
3
2
1
4
3
2
1
Lead
color
Brown
White
Blue
Black 4
3
2
1
CN2
CN1
CN0
4
3
2
11
2
3
44
3
2
1
CN2
CN1
CN0
4
3
2
11
2
3
4
XS3
23
XS3 M8/S8 Connector Cover
Dust Covers
Model Material Suitable connector
Model Mounting portion
XS3Z-13 PVC resin/red
XS3H/XS3W/XS3R M8 plug
XS3F/XS3W S8 socket
XS3H/XS3W S8 plug
XS3M M8/S8 plug
XS3Z-15 XS3F/XS3W/XS3R M8 socket
XS3Z-13
M8 Plug
S8 Socket
S8 Plug
XS3Z-15 M8 Socket
XS3Z-13 XS3Z-15
The Dust Cover is for dust prevention and does not
ensure IP67 degree of protection.
When mounting the Dust Cover to a Connector, be
sure to press the Dust Cover onto the Connector until
the Connector is fully inserted into the Dust Cover.
24
XS3
Safety Precautions
Do not use the product in atmospheres or environments that exceed product ratings.
Connections
The XS3 and XS2 Sensor I/O Connectors cannot be
connected to each other.
You cannot mate Connectors that have a different number
of poles.
When using Sensors with Connectors or Limit Switches,
use the Sensor I/O Connectors specified in the catalog.
Do not connect M8 screw-on models and S8 snap-in
models together, otherwise the proper degree of protection
of the Connectors will not be maintained.
Connector Connection and Disconnection
Before connecting or disconnecting Connectors, make sure
that no power is being supplied to the Connectors.
When connecting or disconnecting Connectors, be sure to
hold the Connectors by hand. Do not disconnect the
Connectors by pulling the cable.
Do not touch the mating surface of the connectors with wet
hands. If there is any water on the Connector or near the
Connector, be sure to wipe off the water before connecting
or disconnecting the Connector, otherwise the Connector
may short-circuit internally or not ensure good insulation.
Make sure that mating section of any Connector is free of
metal dust or power.
Do not use pliers to tighten mounting the thread bracket,
otherwise the thread bracket may be damaged. Be sure to
tighten each thread bracket by hand within a torque of
0.2 N·m. If the thread bracket is not tightened securely, the
Connector may not maintain its proper degree of protection
or the thread bracket may fall off due to vibration.
When you tighten or loosen a thread bracket, hold onto only
the thread bracket.
If you hold onto the cover or cable, excessive rotational
force will be applied to the Connector and may damage it.
Fully insert S8 snap-in models until the Connectors are
hidden by the metal casing of the opposite parts,
otherwise the Connectors will not maintain their proper
degree of protection or the thread brackets may become
loose due to vibration.
Degree of Protection
Do not impose external force continuously on the joints of
pin blocks and covers, otherwise the Connectors may not
keep its proper degree of protection (i.e., IP67).
Connectors are not fully watertight. Do not use them
underwater.
The Connectors are not oil-resistant. Do not use them
where they would be subject to oil.
If Connectors are used in places with vibration or shock,
secure the mating section of each Connector, otherwise the
Connectors may be disconnected or fail to maintain their
proper degree of protection.
Connectors are of resin mold construction. Do not impose
excessive force on them.
Storage
Do not store Connectors for long periods of time in the
following locations
Locations subject to dust or high humidity
Locations subject to ammonia gas or sulfide gas
Setup
Do not make any cable bends near the base of the Unit.
Any bends made must have a minimum radius of 36 mm.
Precautions for Correct Use
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2018.6
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2018 All Right Reserved.
