kHz Range Crystal unit FC-135 Product name Product Number / Ordering code FC-135 32.768000 kHz 12.5 +10.0-10.0 Q13FC13500005xx Please refer to the 5.Packing information about xx (last 2 digits) Complies with EU RoHS directive Reference weight Typ. 11 mg 1.Absolute maximum ratings Parameter Symbol Min. Typ. Max. Unit T_stg GL -55 - 0.5 125 - C W 2.Specificatoins(characteristics) Parameter Symbol Min. Typ. Max. Unit Nominal frequency Operating temperature Level of drive Frequency tolerance Turnover temperature Parabolic coefficient Load capacitance Motional resistance (ESR) Motional capacitance Shunt capacitance Motional inductance Frequency aging -40 -10.0 20 -3 32.768 0.1 25 12.5 55 3.4 1 7.1 - 85 +10.0 30 -0.04 70 3 Storage temperature Maximum drive level f_nom T_use DL f_tol Ti B CL R1 C1 C0 L1 f_age (Unit: mm) Storage as single product Conditions / Remarks kHz C W x 10-6 +25C DL=0.1W C x 10-6/C2 pF k fF pF kH x10-6 /yea @+25C, First year 4.Footprint(Recommended) 1.50.1 3.External dimensions Conditions / Remarks C622J (Unit: mm) 1.0 0.80.1 1.8 3.20.1 1.7 2.5 Internal Connection #1 #2 *Do not design any circuit patterns in the shaded area. #1 #2 0.75 5.Packing information [ 1 ]Product number last 2 digits code (xx) description Q13FC13500005xx Code 01 11 12 13 Condition Any Q'ty vinyl bag(Tape cut) Any Q'ty / Reel 250pcs / Reel 500pcs / Reel The recommended code is "00" Code 14 15 00 1 Page Condition 1000pcs / Reel 2000pcs / Reel 3000pcs / Reel [ 2 ] Taping specification Subject to EIA-481 & IEC-60286 (1) Tape dimensions TE1204L Material of the Carrier Tape : PS Material of the Top Tape : PET+PE Unit: mm +0.2 -0 4.00.1 0.30.05 3.60.1 EPSON EPSON 1.0 1.000.1 12.10.2 4.00.1 5.50.05 +0.1 1.5 -0 1.750.1 10P: 400.1 2.00.05 1.90.1 User direction of feed (2) Reel dimensions Material of the Reel : PS Unit: mm +0 -3 180.00 mm 1 15.40 mm 0.3 13.00 mm 160 60.00 mm 76 +0.3 -0 2.00 mm H 3 21 0.8 2 Page 13 0.2 Reflow profile Pre Heating Temperature Tp1 ~ Tp2 = + 170 C Heating Temperature TMlt = + 220 C Peek Temperature TMax. = + 260 C Temperature +260C TMax. +220C Tmlt Point of measuring In case of Solder ability Terminal. In case of Resistance to soldering heat Surface. Tp2 Tp1 35s 100s t(time) Notice * This material is subject to change without notice. * Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. * The information about applied data,circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of customer damage or infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. * When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. * You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. * These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / Traffic control equipment / And others requiring equivalent reliability. * All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective. Contact us www5.epsondevice.com/en/contact/ 3 Page