REV -P R T 1/4" WRENCH FLATS 5/16" WRENCH FLATS FERRULE 5 5 .064 DESCRIPTION OFFICIAL RELEASE TO MFG DASH -12 STAMPING WAS '74868 39012/55B4012 YYWW' REDRAWN IN PRO-E; CUSTOMER SHEET ADDED 901-155-11 901-155-12 5 41240 CPM/PB 2-9-98 42285 CPM/PB 3/3/15 50389 2.000 .312 HEX 5/16" WRENCH FLATS 0.69 REF STAMPING 0.57 74868 M3901/55B4019 YYWW 0.12 0.22 74868 M3901/55B4012 YYWW RECOMMENDED CABLE ENTRY DIMENSIONS CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. 7-11-96 MIL-C-39012 INSPECTION .187 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: <0.5mm 0.5 - 6mm 6 - 30mm 30 - 120mm ANGLES 19127 APPR .032 PART NUMBER .719 3-13-72 ECO SCALE 3 SAFETY WIRE HOLES STAMP PER MARKING TABLE (.02 MIN HIGH CHARACTERS) HEAT SHRINK TUBE DATE REDRAWN TO AUTOCAD WAS 'C' SIZE; DEL NOTES 4, 5 & 14; CHGD NOTE 3; ADD NOTE 15 & PLATE CODES; NOTE 6 '6 LB' WAS 8 LB; DEL HEAT TREAT FROM STAMP INTERFACE PER MIL-SRD-348 SMA SERIES CONTACT SUB-ASSEMBLY 5 .128 REVISIONS THIRD ANGLE PROJ. NOTES: 1. MATERIALS AND FINISHES: BODY - BRASS, GOLD PLATING PLATING (.0004 THICK) CONTACT -BRASS, GOLD PLATING (.0004 THICK) INSULATOR - PTFE GASKET - SILICONE RUBBER FERRULE - BERYLLIUM COPPER, NICKEL PLATING (.0004 THICK) RETAINING RING - BERYLLIUM COPPER, GOLD PLATING (.0004 THICK) NUT - BRASS, NICKEL PLATING (.0004 THICK) 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. DIELECTRIC WITHSTANDING VOLTAGE: 1000 VRMS, MIN. 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF. 901-155-12, AND DATE CODE" 5. INDICATES CABLE ENTRY DIMENSIONS 6. FOR CABLE ASSEMBLY INSTRUCTIONS, SEE SHEET 17 OF AMPHENOL SPEC 349-50114, MATERIAL SEE NOTES REFERENCE AND CONFIGURATION LEVEL: In Work FINISH DRAWN J. NERI DATE 19-Jan-15 ENGINEER J. HUBBELL DATE 19-Jan-15 APPROVED K. CAPOZZI DATE 2/26/15 CAD FILE TITLE SPEC. SMA CONNECTOR CRIMP TYPE PLUG FOR RG-174/U & RG-188/U & RG-316/U CABLES SCALE: 4.0:1.0 DWG SIZE B SHEET Amphenol RF www.amphenolrf.com DRAWING NO. 901-155-XX 2 OF 2 REV T ITEM NO. 901-155-XX PART NO. 901-155-XX JN