ICS8302I-01 Integrated Circuit Systems, Inc. LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT GENERAL DESCRIPTION FEATURES T h e I C S 8 3 0 2I-01 i s a l ow s kew, 1 - t o - 2 LVCMOS/LVTTL Fanout Buffer w/ComplemenHiPerClockSTM tary Output a n d a m e m b e r o f t h e HiPerClock S TMfamily of High Performance Clock Solutions from ICS. The ICS8302I-01 has a single ended clock input. The single ended clock input accepts LVCMOS or LVTTL input levels. T h e ICS8302I-01 is characterized at full 3.3V for input VDD, and mixed 3.3V and 2.5V for output operating supply modes (VDDO). Guaranteed output and part-to-part skew characteristics make the ICS8302I-01 ideal for clock distribution applications demanding well defined performance and repeatability. * Complementary LVCMOS / LVTTL output ICS * LVCMOS / LVTTL clock input accepts LVCMOS or LVTTL input levels * Maximum output frequency: 250MHz * Output skew: 165ps (maximum) * Part-to-part skew: 800ps (maximum) * Small 8 lead SOIC package saves board space * Full 3.3V or 3.3V core/2.5V output supply modes * -40C to 85C ambient operating temperature * Available in both standard and lead-free compliant packages BLOCK DIAGRAM PIN ASSIGNMENT VDDO VDD CLK GND Q CLK 1 2 3 4 8 7 6 5 Q GND VDDO nQ ICS8302I-01 nQ 8-Lead SOIC 3.8mm x 4.8mm, x 1.47mm package body M Package Top View 8302AMI-01 www.icst.com/products/hiperclocks.html 1 REV. A NOVEMBER 2, 2005 ICS8302I-01 Integrated Circuit Systems, Inc. LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT TABLE 1. PIN DESCRIPTIONS Number Name 1, 6 VDDO Power Type Description Output supply pins. 2 VDD Power Power supply pin. 3 CLK Input 4,7 GND Power Pulldown LVCMOS / LVTTL clock input. 5 nQ Output Complementary clock output. LVCMOS / LVTTL interface levels. 8 Q Output Clock output. LVCMOS / LVTTL interface levels. Power supply ground. NOTE: Pulldown refer to internal input resistors. See Table 2, Pin Characteristics, for typical values. TABLE 2. PIN CHARACTERISTICS Symbol Parameter CIN Input Capacitance CPD Power Dissipation Capacitance (per output) RPULLDOWN Input Pulldown Resistor ROUT Output Impedance 8302AMI-01 Test Conditions Minimum Typical Maximum Units 4 pF VDD, VDDO = 3.465V 22 pF VDD = 3.465V, VDDO = 2.625V 16 pF 51 k 5 www.icst.com/products/hiperclocks.html 2 7 12 REV. A NOVEMBER 2, 2005 ICS8302I-01 Integrated Circuit Systems, Inc. LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT ABSOLUTE MAXIMUM RATINGS Supply Voltage, VDD 4.6V Inputs, VI -0.5V to VDD + 0.5 V Outputs, VO -0.5V to VDDO + 0.5V Package Thermal Impedance, JA 112.7C/W (0 lfpm) Storage Temperature, TSTG -65C to 150C NOTE: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond those listed in the DC Characteristics or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. TABLE 3A. POWER SUPPLY DC CHARACTERISTICS, VDD = 3.3V5%, VDDO = 3.3V5% OR 2.5V5%, TA = -40C TO 85C Symbol Parameter VDD Power Supply Voltage Test Conditions VDDO Output Power Supply Voltage IDD IDDO Minimum Typical Maximum Units 3.135 3.3 3.465 V 3.135 3.3 3.465 V 2.375 2.5 2.625 V Power Supply Current 13 mA Output Supply Current 4 mA TABLE 3B. LVCMOS / LVTTL DC CHARACTERISTICS, VDD = 3.3V5%, VDDO = 3.3V5% OR 2.5V5%, TA = -40C TO 85C Symbol Parameter Maximum Units VIH Input High Voltage Test Conditions Minimum 2 Typical VDD + 0.3 V VIL Input Low Voltage -0.3 0.8 V 150 A IIH Input High Current CLK VDD = VIN = 3.465V IIL Input Low Current CLK VDD = 3.465V, VIN = 0V -5 A VDDO = 3.465, 50 to VDDO/2 2.6 V VDDO = 3.465, IOH = -100A 2.9 V VDDO = 2.625, 50 to VDDO/2 1.8 V VDDO = 2.625, IOH = -100A 2.2 VOH VOL 8302AMI-01 Output High Voltage Output Low Voltage V VDDO = 3.465, 50 to VDDO/2 0. 5 V VDDO = 3.465, IOL = 100A 0.2 V VDDO = 2.625, 50 to VDDO/2 0. 5 V VDDO = 2.625, IOL = 100A 0.2 V www.icst.com/products/hiperclocks.html 3 REV. A NOVEMBER 2, 2005 ICS8302I-01 Integrated Circuit Systems, Inc. LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT TABLE 4A. AC CHARACTERISTICS, VDD = VDDO = 3.3V5%, TA = -40C TO 85C Symbol Parameter Test Conditions fMAX Output Frequency tpLH Propagation Delay, Low-to-High; NOTE 1 Minimum Typical 1.8 Maximum Units 250 MHz 2.7 ns t sk(o) Output Skew; NOTE 2, 4 165 ps t sk(pp) Par t-to-Par t Skew; NOTE 3, 4 800 ps tR / tF Output Rise/Fall Time odc Output Duty Cycle 20% to 80% 300 800 ps 133MHz 45 55 % 60 % Maximum Units 250 MHz 2.9 ns 133MHz < 250MHz 40 NOTE 1: Measured from VDD/2 of the input to VDDO/2 of the output. NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at VDDO/2. NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load conditions. Using the same type of inputs on each device, the outputs are measured at VDDO/2. NOTE 4: This parameter is defined in accordance with JEDEC Standard 65. TABLE 4B. AC CHARACTERISTICS, VDD = 3.3V5%, VDDO = 2.5V5%, TA = -40C TO 85C Symbol Parameter Test Conditions fMAX Output Frequency tpLH Propagation Delay, Low-to-High; NOTE 1 Minimum Typical 1.9 t sk(o) Output Skew; NOTE 2, 4 250 ps t sk(pp) Par t-to-Par t Skew; NOTE 3, 4 900 ps tR / tF Output Rise/Fall Time odc Output Duty Cycle 20% to 80% 100 850 ps 133MHz 45 55 % 60 % 133MHz < 250MHz 40 NOTE 1: Measured from VDD/2 of the input to VDDO/2 of the output. NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at VDDO/2. NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load conditions. Using the same type of inputs on each device, the outputs are measured at VDDO/2. NOTE 4: This parameter is defined in accordance with JEDEC Standard 65. 8302AMI-01 www.icst.com/products/hiperclocks.html 4 REV. A NOVEMBER 2, 2005 ICS8302I-01 Integrated Circuit Systems, Inc. LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT PARAMETER MEASUREMENT INFORMATION 1.65V5% 2.05V5% 1.25V5% SCOPE VDD, VDDO VDDO Qx LVCMOS SCOPE VDD Qx LVCMOS GND GND -1.65V5% -1.25V5% 3.3V CORE/3.3V OUTPUT LOAD AC TEST CIRCUIT V CLK 3.3V/2.5V OUTPUT LOAD AC TEST CIRCUIT V DD DDO 2 Q 2 nQ V V DDO 2 Q nQ DDO 2 V DDO 2 tsk(o) t PD OUTPUT SKEW PROPAGATION DELAY PART 1 V DD Q 80% 80% tR tF 2 PART 2 V DDO Clock Outputs 2 Q nQ 20% 20% V DDO 2 tsk(pp) PART-TO-PART SKEW OUTPUT RISE/FALL TIME nQ VDDO VDDO 2 Q 2 t PW t PERIOD odc = t PW t PERIOD OUTPUT DUTY CYCLE/PULSE WIDTH/PERIOD 8302AMI-01 www.icst.com/products/hiperclocks.html 5 REV. A NOVEMBER 2, 2005 ICS8302I-01 Integrated Circuit Systems, Inc. LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT RELIABILITY INFORMATION TABLE 5. JAVS. AIR FLOW TABLE FOR 8 LEAD SOIC JA by Velocity (Linear Feet per Minute) Single-Layer PCB, JEDEC Standard Test Boards Multi-Layer PCB, JEDEC Standard Test Boards 0 200 500 153.3C/W 112.7C/W 128.5C/W 103.3C/W 115.5C/W 97.1C/W NOTE: Most modern PCB designs use multi-layered boards. The data in the second row pertains to most designs. TRANSISTOR COUNT The transistor count for ICS8302I-01 is: 322 8302AMI-01 www.icst.com/products/hiperclocks.html 6 REV. A NOVEMBER 2, 2005 ICS8302I-01 Integrated Circuit Systems, Inc. PACKAGE OUTLINE - SUFFIX M FOR LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT 8 LEAD SOIC TABLE 6. PACKAGE DIMENSIONS SYMBOL Millimeters MINIMUN N A MAXIMUM 8 1.35 1.75 A1 0.10 0.25 B 0.33 0.51 C 0.19 0.25 D 4.80 5.00 E 3.80 4.00 e H 1.27 BASIC 5.80 6.20 h 0.25 0.50 L 0.40 1.27 0 8 Reference Document: JEDEC Publication 95, MS-012 8302AMI-01 www.icst.com/products/hiperclocks.html 7 REV. A NOVEMBER 2, 2005 ICS8302I-01 Integrated Circuit Systems, Inc. LOW SKEW, 1-TO-2 LVCMOS / LVTTL FANOUT BUFFER W/ COMPLEMENTARY OUTPUT TABLE 7. ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS8302AMI-01 302AI01 8 lead SOIC tube -40C to 85C ICS8302AMI-01T 302AI01 8 lead SOIC 2500 tape & reel -40C to 85C ICS8302AMI-01LF 302AI01L 8 lead "Lead-Free" SOIC tube -40C to 85C ICS8302AMI-01LFT 302AI01L 8 lead "Lead-Free" SOIC 2500 tape & reel -40C to 85C NOTE: Par ts that are ordered with an "LF" suffix to the par t number are the Pb-Free configuration and are RoHS compliant. The aforementioned trademark, HiPerClockS is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated (ICS) assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. 8302AMI-01 www.icst.com/products/hiperclocks.html 8 REV. A NOVEMBER 2, 2005