Type TF Low TC Ultra-Precision Film Resistors Absolute TC to 5 ppm/C, Values from 1 Kohm to 125 Megohms, Absolute Tolerance to 0.01% Type TF precision resistors employ the Caddock Tetrinox (R) resistance films - the resistance system that sets a new standard for high value, ultra-stable precision resistors that provide an exceptional combination of performance characteristics: * Ultra-Precision - Five standard resistance tolerances from 1% to 0.01%. * A Wide Range of Resistance Values - from 1 Kohm to 125 Megohms. * Low Temperature Coefficient - 5 ppm/C, 10 ppm/C, or 15 ppm/C. * Long-Term Stability - to 0.01% per 1,000 hours. This approach to quantity production of ultra-precision discrete resistors is the result of combining our unique complex oxide resistance film technology with an advanced high thru-put laser manufacturing capability. Type TF - Standard Resistance Range - 1 Kohm to 10 Megohms Axial Leads Radial Leads Maximum Continuous Oper. Voltage Wattage @ +70C Resistance Min. Max. A B .750 .020 (19.05 .51) .375 .020 (9.53 .51) TF 020 N TF 020 R 0.33 300 1K 2 Meg TF 050 N TF 050 R 0.75 1,400 10 K 10 Meg Shelf Life: Typically 0.0025% per year Dimensions inches (mm) Load Stability: 1.500 .020 .500 .020 (38.10 .51) (12.70 .51) RATED LOAD, % Model Number 100 80 60 40 20 0 0.01% 0.02% 0.03% MAXIMUM %R per 1,000 HOURS Type TF - Extended Resistance Range - 2 Megohms to 125 Megohms Model Number Axial Leads Radial Leads TF 626 N TF 656 N Maximum Continuous Oper. Voltage Wattage @ +70C TF 626 R 0.33 TF 656 R 2.01 Meg 300 0.75 1,400 Shelf Life: Typically 0.005% per year 1.500 .125 (38.10 3.18) Resistance Min. 10.01 Meg A B 35 Meg .750 .020 (19.05 .51) .375 .020 (9.53 .51) 125 Meg 1.500 .020 (38.10 .51) .500 .020 (12.70 .51) A CADDOCK TF020N 0428 A .032 (.81) CADDOCK TF020R 0418 .032 (.81) .075 .020 (1.91 .51) B .50 .125 (12.70 3.18) Radial Lead Spacing: DIMENSIONS IN INCHES AND (MILLIMETERS) Additional cost savings can be realized when your high volume ultra-precision Type TF resistor is optimized for: * Lightning transient capability * Voltage rating * Power rating * Mechanical configuration * Ratio matched sets (c) 2004 Caddock Electronics, Inc. Absolute Temperature Coefficient: 5 ppm/C, 10 ppm/C, or 15 ppm/C referenced to +25C, R taken at -15C and +105C. Resistance Tolerance: 0.01%, 0.025%, 0.05%, 0.10%, or 1.0%. Load Life: For 0.10% or tigher tolerance, 1,000 hours at +70C. Load stability versus applied power is shown in the load stability curve on this page. Storage Temperature: -55C to +105C. Leadwire: Tinned Copper. Derating Curve: 100 80 RATED LOAD, % 60 40 20 0 0 35 70 CADDOCK 105 AMBIENT TEMPERATURE, C Ordering Information: TF050R - 10.0 Meg - 0.01% - 10 ppm/C Model Number Tolerance Resistor Value .600 .020 (15.24 .51) for Models TF020R and TF626R 1.350 .020 (34.29 .51) for Models TF050R and TF656R Custom Type TF Resistors Applications Engineering 17271 North Umpqua Hwy. Roseburg, Oregon 97470-9422 Phone: (541) 496-0700 Fax: (541) 496-0408 Apply to all Type TF resistor models. Load Stability: 1,000 hours at rated voltage at +70C, maximum R 0.03% .075 .020 (1.91 .51) B Dimensions inches (mm) Max. Specifications: Temperature Coefficient And for special requirements, custom Type TF resistors are available with: * TC of 5 ppm/C, 10 ppm/C, 15 ppm/C, 20 ppm/C, or 25 ppm/C. * Shelf stability of 0.0025% per year. Type TF resistors can also be produced with custom-spaced radial leads that will plug directly into your existing circuit layout. e-mail: caddock@caddock.com * web: www.caddock.com For Caddock Distributors listed by country see caddock.com/contact/dist.html Sales and Corporate Office 1717 Chicago Avenue Riverside, California 92507-2364 Phone: (951) 788-1700 Fax: (951) 369-1151 28_IL116.1004