HLMP-1450-B0001 - Agilent / Hewlett-Packard

Tape and Reel Options for T-13/4

(5 mm), T-1 (3 mm), LED Lamps

Technical Data

Features

• Compatible with Radial Lead

Automatic Insertion

Equipment

• Meets Dimensional Specifi-

cations of IEC Publication

286 and ANSI/EIA Standard

RS-468 for Tape and Reel

• Reel Packaging Simplifies

Handling and Testing

• T-1 and T-1 3/4 LED Lamps

Available Packaged on Tape

and Reel

• 5 mm (0.197 inch) Formed

Lead and 2.54 mm (0.100

inch) Straight Lead Spacing

Available

Description

T-1 and T-13/4 LED lamps are

available on tape and reel as

specified by the IEC Publication

286 and ANSI/EIA Standard

RS-468. The Option 01 lamp

devices have formed leads with

5 mm (0.197 inch) spacing for

automatic insertion into PC

boards by radial lead insertion

equipment. The Option 02 lamp

devices have straight leads with

2.54 mm (0.100 inch) spacing,

packaged on tape and reel for

ease of handling. T-1 lamps are

packaged 1800/reel. T-13/4 lamps

are packaged 1300/reel.

Ordering Information

To order LED lamps packaged on

tape and reel, include the

appropriate option code along

with the device catalog part

number. Example: to order the

HLMP-3300 on tape and reel with

formed leads (5 mm lead spacing)

order as follows: HLMP-3300

Option 01. Minimum order

quantities vary by part number.

Orders must be placed in reel

increments. Please contact your

local Agilent sales office or

franchised Agilent distributor for

a complete list of lamps available

on tape and reel.

LED lamps with 0.46 mm (0.018

inch) square leads with 5 mm

(0.197 inch) lead spacing are

recommended for use with

automatic insertion equipment.

Option 01

Option 02

Package Quantity/Reel Order Increments

T-1 1800 1800

T-13/41300 1300

Device Selection Guide

Option Description

01 Tape and reel, 5 mm (0.197 inch) formed leads.

02 Tape and reel, 2.54 mm (0.100 inch) straight leads.

Caution: Agilent does not

recommend T-1 package, option

02 LEDs for auto-insertion. The

force exerted on the LED lead

frame during the cut and clinch

operation of auto-insertion may

result in cracking of the lamp

epoxy dome which results in

catastrophic failure. It is

suggested that insertion machine

compatibility be confirmed.

Absolute Maximum

Ratings and Electrical/

Optical Characteristics

The absolute maximum ratings,

mechanical dimension tolerances

and electrical/optical

characteristics for lamps

packaged on tape and reel are

identical to the basic catalog

device. Refer to the basic data

sheet for the specified values.

Notes:

1. Minimum leader length at either end of

tape is 3 blank part spaces.

2. Silver saver paper is used as the

interlayer for silver plated lead devices.

3. The maximum number of consecutive

missing lamps is 3.

4. In accordance with EIA and IEC specs,

the anode lead leaves the reel first.

5. Drawings apply to devices with

0.46 mm (0.018 inch) square leads

only. Contact Agilent Sales Office for

dimensions of 0.635 mm (0.025 inch)

square lead devices.

Tape and Reel LED Configurations

Figure 1. T-1 High Profile Lamps, Option 01. Figure 2. T-1 High Profile Lamps, Option 02.

Figure 3. T-1 Low Profile Lamps, Option 01. Figure 4. T-1 Low Profile Lamps, Option 02.

Tape and Reel LED Configurations (cont.)

Figure 5. T-13/4 High Profile Lamps, Option 01. Figure 6. T-13/4 High Profile Lamps, Option 02.

Figure 8. T-13/4 Low Profile Lamps, Option 02.Figure 7. T-13/4 Low Profile Lamps, Option 01.

Dimensional Specifications for Tape and Reel

Item Option 01 02 Symbol Specification Notes

T1 High Profile

Body Height A1 4.70 (0.185)

4.19 (0.165)

Body Diameter D1 3.18 (0.125)

2.67 (0.105)

Component Height H1 25.7 (1.012) Max.

Tl Low Profile

Body Height A2 3.73 (0.147)

3.23 (0.127)

Body Diameter D2 3.05 (0.120)

2.79 (0.110)

Component Height H2 24.7 (0.974) Max.

T13/4 High Profile

Body Height A3 9.19 (0.362)

8.43 (0.332)

Body Diameter D3 5.08 (0.200)

4.32 (0.170)

Component Height H3 30.2 (1.189) Max.

T13/4 Low Profile

Body Height A4 6.35 (0.250)

5.33 (0.210)

Body Diameter D4 5.08 (0.200)

4.32 (0.170)

Component Height H4 27.4 (1.079) Max.

Lead Wire Thickness d 0.45 (0.018) Square Leads

Pitch of Component P 13.7 (0.539)

11.7 (0.461)

Feed Hole Pitch P012.9 (0.508) Cumulative error:

12.5 (0.492) 1.0 mm/20 pitches

Feed Hole Center to Lead Center P1 4.55 (0.179) Measure at crimp

3.15 (0.124) bottom 5.78/3.68

(0.227/0.1448) for

straight leads

Hole Center to Component Center P2 7.35 (0.289)

5.35 (0.211)

Lead to Lead Distance F 5.40 (0.213) 2.54 (0.100) nominal

4.90 (0.193) for straight leads

Component Alignment, Front-rear ∆h0 ± 1.0 (0.039) Figure 9

Tape Width W 18.5 (0.728)

17.5 (0.689)

Hold Down Tape Width W015.3 (0.602)

12.0 (0.472)

Hole Position W1 9.75 (0.384)

8.50 (0.335)

Item Option 01 02 Symbol Specification Notes

Hold Down Tape Position W2 2.54 (0.100) Max.

Height of Component from Hole Center H 21.0 (0.827)

20.0 (0.787)

Lead Clinch Height HO16.5 (0.650)

15.5 (0.610)

Feed Hole Diameter DO4.20 (0.165)

3.80 (0.150)

Total Tape Thickness t 0.90 (0.035) Paper thickness:

0.50 (0.020) 0.55 (0.022)

0.45 (0.018) Figure 9

Length of Snipped Lead L 11.0 (0.433) Max.

Lead Length Under Hold Down Tape I1 14.5 (0.571) Min.

Note:

1. Dimensions in millimetres (inches) maximum/minimum.

Dimensional Specifications for Tape and Reel (cont.)

Figure 11. Reel Configuration and Labeling.

Figure 9. Front to Rear Alignment and

Tape Thickness, Typical All Device

Types. Figure 10. Device Retention Tests and Specifications.

www.semiconductor.agilent.com

Data subject to change.

Obsoletes 5964-9375E (4/96)

5968-4164E (11/99)