R series: Single
–
sided PCB
Small and light
Built
-
in inrush current, overcurrent
and overvoltage protection circuits.
UL recognized, TÜV approved, CSA
certified
Three
-
year warranty
¡ ORDERING INFORMATION
R100 -5-
Optional:Ex.with Cover:N
Output voltage
UL recognized, TÜV approved,
CSA certified:U
Output wattage
Series name
R100
R SERIES POWER SUPPLY
¶1 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25ª, with the input voltage held constant at the rated input/output.
¶ Avoid prolonged use under over-load.
¶ Parallel operation with other model is not possible.
¶ Derating is required when operated with case cover.
VOLTAGE / CURRENT
FREQUENCY
EFFICIENCY
INRUSH CURRENT
LEAKAGE CURRENT
VOLTAGE
CURRENT
LINE REGULATION
LOAD REGULATION
RIPPLE
[mVp-p]
START-UP TIME
HOLD-UP TIME
INPUT-OUTPUT
INPUT-FG
OUTPUT-FG
VIBRATION
IMPACT
AGENCY APPROVALS
AC85~132V 1º or DC110~170V / 2.8A typ (ACIN100V, lo=100%)
47~440Hz or DC
15A typ (ACIN 100V, lo=100%)
0.5mA max (60Hz, by UL, CSA and Dentori)
200max (ACIN 85V, lo =100 %)
20typ (ACIN 100V, lo=100 %,0~+50:) 10typ (ACIN 85V, lo =100 %,0~+50:)
Works over 105% of rating and recovers automatically
LED (Green)
Provided
AC2,000V, 1minute, Cutoff current= 10mA max, DC500V, 50MΩ min.(At Room Temperature)
AC2,000V, 1minute, Cutoff current= 10mA max, DC500V, 50MΩ min.(At Room Temperature)
AC 500V, 1minute, Cutoff current=100mA max, DC500V, 50MΩ min.(At Room Temperature)
-10~+60:,20~90%RH (Non condensing)(Refer to DERATING CURVE) , 3,000m (10,000feet)max
-20~+75:,20~90%RH (Non condensing), 9,000m(30,000feet)max
10~55Hz, 19.6m/s2(2G), 3 minutes period, 60 minutes each along X, Y and Z axis
196.1m/s2(20G), 11ms, once each X, Y and Z axis
UL1950, C-UL, EN60950, VDE0160 Complies with DENTORI and IEC60950
Complies with FCC
–
B, VCCI
–
B
[V]
[A]
[mV]
[mV]
0~+50 :
-10~0 :
0~+50 :
-10~0 :
0~+50 :
[mV]¶1
[ms]
[ms]
[V]
OVERVOLTAGE
PROTECTION
OPERATING
INDICATION
OPERATING TEMP. ,
HUMID. AND ALTITUDE
STORAGE TEMP. ,
HUMID. AND ALTITUDE
CONDUCTED NOISE
REMOTE
SENSING
OVERCURRENT
PROTECTION
DRIFT
OUTPUT VOLTAGE
ADJUSTMENT RANGE
TEMPERATURE
REGULATION
[mV]
MODEL
INPUT
OUTPUT
ISOLATION
PROTECTION
CIRCUIT AND
OTHERS
SAFETY AND
NOISE
REGULATIONS
ENVIRONMENT
SPECIFICATIONS
5
20
20 max
40 max
80 max
140 max
120 max
160 max
50 max
20 max
4.5~5.5
R100-5
79%typ
3
20
20 max
40 max
80 max
140 max
120 max
160 max
50 max
20 max
2.85~3.6
R100-3
75%typ
12
8.5
48 max
100 max
120 max
160 max
150 max
180 max
120 max
48 max
10.8~13.2
R100-12
82%typ
9
11.5
36 max
100 max
120 max
160 max
150 max
180 max
90 max
36 max
8.1~9.9
R100-9
80%typ
15
7
60 max
120 max
120 max
160 max
150 max
180 max
150 max
60 max
13.5~16.5
R100-15
83%typ
18
5.6
72 max
120 max
120 max
160 max
150 max
180 max
180 max
72 max
16.2~19.8
R100-18
84%typ
24
4.5
96 max
150 max
120 max
160 max
150 max
180 max
240 max
96 max
21.6~26.4
R100-24
85%typ
RIPPLE
NOISE
[mVp-p]
4.00~5.25V
R
Works at 115%~140% of rating
134
R
