1
DF59 Series
2017.9t
Features
● Common to all series
1. High Operating Temperature
DF59’s are rated at temperatures up to 105 ç.
●DF59
2. Swing Lock Structure (Wire-to-Board)
The DF59 features a “swing-lock” mechanism that employs
both a positive and friction lock. This helps to prevent
accidental unmating by severe wiring and mechanical stress.
3. Short-Circuit Pin
The Short-Circuit Pin allows the termination of an open circuit.
Typically used at the end of a series of connected circuit boards.
4. Multi Function Design
The DF59 has the ability to function as either a Board-to-
Wire or Board-to-Board System. The PCB mounted
receptacle is designed to mate with the W-to-B, B-to-B,
and Short Circuit Pin connectors. This multi function ability
allows versatility while keeping connectors to a minimum.
5. Contact Design
The terminal design features two-point contact to
ensure a highly reliable connection.
6. Common Applicator
Crimping can be performed using the applicator (AP105-
DF11-22S) for the existing series DF11-22S C F(A), by
replacing the die with the one for DF59 series.
* For crimping quality standards and crimping conditions,
crimping needs to be performed in accordance with the
specific conditions of DF59-22PCFA.
●Common to DF59/59S/59SN
7. Floating Structure (Board-to-Board)
The Board-to-Board connector can be used to connect two PCB
together in a co-planar arrangement and features a “Stress free
contact” that floats ± 0.5mm in the X, Y and Z dimensions.
8. Space Savings
The DF59 series offers high performance in a compact,
space saving design; featuring a 2mm pitch and coupled
with a mated height of only 2.48mm with AWG#22 cable.
The single position floating plugs DF59S and DF59SN
are specifically designed to save space, and can be
mounted in high density applications.
9.
Robust locking structure on DF59M (W-to-B Connection)
The lock mechanism on compact DF59M provides
16N horizontal lock strength. (Fig.4)
10.
Standardization of PCB layout
The DF59S/SN type is used on board-to-board connections,
and the DF59M type is intended for wire-to-board
connections. Although they have different receptacles, the
PCB mounting pattern can be used for these two types.
Different combinations of these connectors can be used in the
same system with a common PCB. This allows for
standardization of PCB.
(Fig.5)
Note : Each stencil mask is necessary
DF59 floating amount ±0.5mm(X,Y, Z directions)
DF59S/SN floating amount
±0.5mm(X,Y direction), ±0.2mm(Z direction)
¤%#*bb
¤%#*bb
¤%#*bb
OY^gZXi^dc
MY^gZXi^dc
NY^gZXi^dc
¤%#*
¤%#'
¤%#*bb
OY^gZXi^dc
MY^gZXi^dc
NY^gZXi^dc
2mm Pitch, Multi Functional Connector System
(Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
8jggZci8^gXj^i
Positive Lock
Friction Lock 2.48mm
Short-Circuit Pin
Swing-Lock Structure
(Board-to-Wire Type)
Fig.1
Fig.2
Fig.3
W-to-B structure (DF59M)
Fig.4
Standardization of PCB pattern
Fig.5
DF59S/SN type and DF59M type can be used in the
same system by using a common PCB.
Clear tactile click and high locking strength achieved
by the robust locking mechanism
Mating force : 16N min. (in a horizontal direction)
16N min.
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
2
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
Product Specifications
Ratings
Current rating
DF59/S/SN 3A
Operating Temperature : -40 to 105ç (Note 1)
Operating Humidity Range : 20 to 80%
DF59M 6A (22 AWG), 5A (24 AWG)
4A (26 AWG), 3A (28 AWG)
Voltage rating DF59/S/SN AC/DC 230V (Note 3) Storage Temperature Range : -10 to 60ç (Note 2)
Storage Humidity Range : 40 to 70% (Note 2)
DF59M AC/DC 350V (Note 3)
Items Specifi cations Conditions
1.Contact resistance
DF59-＊P-2FC/SP
DF59S/SN
50mø min. Under 6V DC, must be measured by 100mA
(DC or 1000Hz)
DF59M-1S-H
45mø min.
DF59-＊P-2C
30mø min.
2.Vibration No electrical discontinuity over 1µs.
Frequency 10 to 55Hz, single amplitude 0.75mm,
3 directions, 10 cycles each
3.Shock No electrical discontinuity over 1µs.
Acceleration 490 m/s
2
, 11ms; duration, sine half-wave
3 cycles in each of the 3 axis.
4.Humidity
■Contact resistance
■Insulation resistance
Temperature 40 ± 2ç, humidity 90 to 95%,
left for 96 hours
DF59-＊P-2FC/SP
DF59S/SN
50mø min.
1000Mø max.
DF59M
45mø min.
DF59-＊P-2C
30mø min.
5.Temperature cycle
■Contact resistance
■Insulation resistance
(-55ç : 30 min. ➝ 5-35ç : 2 to 3 min. ➝85ç :
30 min. ➝5-35ç : 2 to 3 min.)
5 cycles
DF59-＊P-2FC/SP
DF59S/SN
50mø min.
1000Mø max.
DF59M
45mø min.
DF59-＊P-2C
30mø min.
6. Operating Life
■Contact resistance ■Number of insertion and withdrawal force
DF59-＊P-2FC
50mø min.
30 times
DF59-＊P-2FC/SP
DF59S/SN
10 times
DF59M
45mø min. 20 times
DF59-＊P-2C
30mø min. 30 times
7. Resistance to
soldering heat No melting of resin which affect the performance.
Refl ow : Depends on recommended temperature profi le.
Hand soldering : Soldering iron temperature 350 ± 10ç, 3 sec.
Note 1 : Including temperature rise caused by current fl ow.
Note 2 :
The term “storage” refers to products stored for long period of time prior to mounting and use.
Operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation.
Note 3 : The rated voltage is the applied voltage when connectors are mounted parallel to each other on the PCB with a distance of 1.6mm
or more between them. Hirose recommends his mounting distance.
This mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of
300V, according to IEC 60664 and JIS C 60664 standards.
Materials / Finish
Items Parts Materials Treatment UL Specification
Receptacle
DF59 Insulator LCP Natural UL94V-0
Contact Phosphor bronze Gold plated
---------------
DF59S Tin plated
DF59M Copper Alloy
Floating plug
DF59 Insulator PBT White UL94V-0
Contact Brass Gold plated ---------------
DF59S Insulator LCP Natural UL94V-0
Contact Brass Tin plated ---------------
DF59SN Insulator LCP Natural UL94V-0
Contact Brass Tin plated ---------------
Crimp contact DF59M Copper Alloy
Short pin Insulator PBT White UL94V-0
Contact Brass Gold plated ---------------
Crimp case Insulator PBT White UL94V-0
Crimp contact Contact Phosphor bronze Gold plated ---------------
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
3
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
● Receptacle
DF 59 # − *S−*V
qwe rt yu
● Short-Circuit pin
● Crimp Socket
●Contact（W-to-B）
DF 59 # − *P−*FC
qwe rt yu
DF 59 − *P−2SP
qw er ty
DF 59 − *P−2C
q w er ty
DF 59 M − 2224 PCF
qwe r t
●Plug
q Series Name : DF
w Series No. : 59
e None : Standard
S ： B-to-B type
M ： W-to-B type
r Number of contacts : 1, 2, 3, 4
t Type of connector
S : Receptacle
y Pitch
None : Single contact type
2 : Standard 2mm (4mm : Without the central contact)
u Termination form
V : SMT straight type (B-to-B type)
H : SMT right angle type (W-to-B type)
q Series Name : DF
w Series No. : 59
e Number of contacts ： 2, 3, 4
r Type of connector
P : Plug
t Pitch : 2mm
y Termination form
SP : Short Pin
q Series Name : DF
w Series No. : 59
e Number of contacts ： 2, 3, 4
r Type of connector
P : Plug
t Pitch : 2mm
y Termination form
C :
Crimp case
q Series Name : DF
w Series No. : 59
e None : Standard
M ： Single contact type (W-to-B M=micro)
r Applicable Wire
22 ： 22 AWG
2224 ： 22 to 24 AWG
2628 ： 26 to 28 AWG
t Form Type/Package Type/Plating type
PCFA : Plug crimping contact·Reel contact·Gold plating
PCA: Plug crimping contact·Bulk contact·Gold plating
PCF: Plug crimping contact·Reel contact·Tin plating
PC: Plug crimping contact·
Bulk
contact·Tin plating
q Series Name : DF
w Series No. : 59
e None : Standard
S ： Single contact type
SN ： Single contact slim type
r Number of contacts
DF59 ： 2, 3, 4
DF59S/SN ： 1
t Type of connector
P : Plug
y Pitch
2 :
DF59 : 2mm (4mm : Without the central contact)
None
: DF59S/SN/M
u Termination form
FC : Floating
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
4
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
[Specifi cation No.]
(51) : Gold plating, emboss packaging
Straight Receptacle (SMT)
%#,
'#,*
,#**
,#.*
6
7
KVXjjb
VgZV
E2'
8
9
'#(
6
:¤%#%*
%#+*¤%#%*
&#%*¤%#%*
&#)¤%#%*
E2'¤%#%*
8¤%#%*
&#&¤%#%*
+#&*¤%#%*
&#)¤%#%*
Unit : mm
Part No. HRS No. No. of contacts A B C D E
DF59-2S-2V(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62
DF59-3S-2V(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62
DF59-4S-2V(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62
DF59-2S-4V(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62
* DF59-2S-4V(51) is made by removing the middle pin of DF59-3S-2V(51) at the factory.
Note : Please order in full reel quantities. (2,000 pcs/reel)
Unreeling Direction
F
FGG
G-G
F-F
12±0.1
4±0.1
2±0.1
(24)
1.75±0.1
11.5±0.1
22.25 +0.2
0
Ø1.5 +0.1
0
●Packaging Dimensions ●
Recommended PCB Dimensions(t=1.6mm)
[Specifi cation No.]
(50) : Gold plating,
tray packaging
Floating Plug
2.65
P=2
B
A
17.1
Unit : mm
Part No. HRS No. No. of contacts A B Packaged Quantity/Tray
DF59-2P-2FC(50) 667-0006-4 50 2 7.2 2.0
50
DF59-3P-2FC(50) 667-0007-7 50 3 9.2 4.0
DF59-4P-2FC(50) 667-0008-0 50 4 11.2 6.0
DF59-2P-4FC(50) 667-0020-5 50 2* 9.2 4.0
* DF59-2P-4FC(50) is made by removing the middle pin of DF59-3P-2FC(50) at the factory.
Note : Please order in full tray quantities. (50 pcs/tray)
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
5
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
Short-Circuit Pin
Crimp Socket
[Specifi cation No.]
(50) : Gold plated, Tray packaging
Unit : mm
Part No. HRS No. No. of contacts A B C Packaged Quantity/Tray
DF59-2P-2SP(50) 667-0017-0 50 2 7.2 5.9 2.0
100DF59-3P-2SP(50) 667-0018-3 50 3 9.2 7.9 4.0
DF59-4P-2SP(50) 667-0046-9 50 4 11.2 9.9 6.0
Note 1 : Please order in full tray quantities.
Note 2 : For 4 pos. type contact No.1 and 2, No.3 and 4 are connected respectively.
Unit : mm
Part No. HRS No. No. of contacts A B C D
DF59-2P-2C 667-0011-4 00 2 7.2 5.9 5.2 2.0
DF59-3P-2C 667-0012-7 00 3 9.2 7.9 7.2 4.0
DF59-4P-2C 667-0013-0 00 4 11.2 9.9 9.2 6.0
Note : Please order in full pack quantities. (100 pcs/pack)
'#))
9
E2'
'#)(
-#&*
8
6
7
'#'-
'#)(
,#.*
7
6
'#'-
E2'
8
[Specifi cation No.]
None : 100 pcs/pack
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
6
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
Part No. HRS No. Packaging Quantity Treatment
DF59-22PCFA 667-0016-8 00 Reel contact (Note 1) 10,000 contacts / reel Gold plated
DF59-22PCA 667-0022-0 00 Bulk contact (Note 2) 100 contacts / pack
Note 1 : Please order reel contacts by full reel quantities. (10,000 pcs/reel)
Note 2 : Please order loose piece contacts in full pack. (100 pcs/pack)
●Applicable Wire (Tin plated soft copper wire)
Conductor Size (Wire Constitution) Jacket Diameter
22 AWG (17 /Ø0.16mm) UL1061 (Ø1.26mm)
UL3265 (Ø1.38mm)
i2%#'
%#, &#'
+#&
(
&#*
%#-*
&#*)
%#-
Crimp contact
●Recommended Wire
UL1061, UL3265
●Strip Length
1.7 to 2.3mm
Note 1 : In these cases please contact Hirose Sales Representative.
・
Assemble with non-applicable wire.
・
LED application usage.
Note 2 : The strip length is a reference value. Please make adjustments to match with dimensional specifi cations. Refer to the
crimping quality standards (ATAD-H0504) for details.
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
7
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
Part No. HRS No.
DF59S-1P-FC(21) 667-0023-3 21
Note : Please order in full reel quantities. (10,000 pcs/reel)
Plug center
markings
HRS logo mark
CAV No.
21.6±0.3
2.±0.37 1.13±0.2
Single Contact Type Floating Plug
[Specifi cation No.]
(21) : Tin plating, emboss packaging
CAV No.
HRS logo mark
G
Plug center
markings
1.17±0.2
1.7±0.2
17.7±0.3
Single Contact Slim Type Floating Plug
Part No. HRS No.
DF59SN-1P-FC(21) 667-0028-7 21
Note 1 : Please order in full reel quantities. (10,000 pcs/reel)
Note 2 : Use the special (DF59SN-1P-FC/IN-TOOL) tool for connector insertion.
[Specifi cation No.]
(21) : Tin plating, emboss packaging
Part No. HRS No.
DF59S-1S-V(21) 667-0024-6 21
Note : Please order in full reel quantities. (10,000 pcs/reel)
Contact
portion
Lock portion
Board edge
Board
edge
0.9
±
0.05
1.5±0.05
0.9
±
0.05
1.5
±
0.05
3.05
±0.05
6.2
±
0.05
Distance between pads:3.0mm Min.
Distance between pads:3.0mm Min.
Contact
portion
Lock
portion
B-B
Unreeling Direction
BB A
AA-A
4±0.1
4±0.1
2±0.1
(16)
7.5
±0.1
1.75
±0.1
14.25
+0.2
0
t=0.3
±0.05
Ø1.5
+0.1
0
Lock portion
Contact portion
Vacuum area
1.7±0.3
1.1±0.2
1.7
±
0.3
1.1
±0.2
4.3±0.2
1.55
±0.15
0.2
±
0.1
1.45±0.15
1±0.15 1±0.2
1±0.2
5.8±0.3
Single Contact Type Straight Receptacle (SMT)
[Specifi cation No.]
(21) : Tin plating, emboss packaging
●Packaging Dimensions
●
Recommended PCB Dimensions(t=1.6mm)
Mount the lock portion side
towards the board edge.
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
8
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
B-B
A-A
t=0.3±0.05
B
B
A
A
Vacuum area
Direction of unreeling
14.25+0.2
0
(16)
4±0.1
2±0.1
9±0.1
(1)
8±0.1
4±0.1
1.75±0.1
0.5±0.2
0.82±0.2
t=0.2±0.05
1±0.21.15±0.2
2±0.2
3±0.2
2.5±0.2
5.45±0.3
1.85±0.2
P=5.5±0.2
1.25±0.2
Part No. HRS No. Applicable Wire By Type Quantity
Treatment
Recommended Wire
Jacket Diameter
Conductor Size
Wire Constitution
DF59M-2224PCF 667-0042-8 00
UL10368
Ø1.11 to 1.26mm 22 AWG 17
/
Ø0.16mm
Reel contact
(Note 1)
10,000/reel
Tin plated
24 AWG 11
/
Ø0.16mm
DF59M-2224PC 667-0044-3 00 Ø1.26
mm
22 AWG 17
/
Ø0.16mm
Bulk contact
(Note 2)
100/pack
Ø1.11
mm
24 AWG 11
/
Ø0.16mm
DF59M-2628PCF 667-0043-0 00 Ø0.88 to 0.98mm 26 AWG
7
/
Ø0.16mm Reel contact
(Note 1)
10,000/reel
28 AWG
7
/
Ø0.17mm
DF59M-2628PC 667-0045-6 00 Ø0.98
mm
26 AWG
7
/
Ø0.16mm Bulk contact
(Note 2)
100/pack
Ø0.88
mm
28 AWG
7
/
Ø0.17mm
Note 1 : Please order reel contacts by full reel quantities. (10,000 pcs/reel)
Note 2 : Please order loose piece contacts in full pack. (100 pcs/pack)
Note 3 : In these cases please contact Hirose Sales Representative.
・
Assemble with non-applicable wire.
・
LED application usage.
Note 4 : The strip length is a reference value. Please make adjustments to match with dimensional specifi cations.
Refer to the crimping quality standards (ATAD-H0778) for details.
■Single Contact Type Right Angle Receptacle (SMT)
■Single Contact Type Crimp Contact
Part No. HRS No.
DF59M-1S-H(21) 667-0041-5 21
Note 1 : Please order in full reel quantities. (10,000 pcs/reel)
Note 2 : This connector is designed to mate with Crimp contact of DF59M only. (P.8)
1.95
±
0.2
1.2±0.2
1
±0.2
Vacuum area
4.4
±
0.3
2.2
±
0.3
2.6
±
0.3
Parallel Arrangement Recommended PCB Layout(５ : １)
PCB end side(Conductor)
The size between pattern : 1.6mm MIN
Pattern
prohibition area
3.3mm MIN
(2mm MIN
)
(5.9)
4.6
±
0.05
(2.6)
(1.3)
Recommended PCB pattern(５ : １)
Connector outline
(5.9)
1.5
±
0.05
0.9
±
0.05
3.7±0.05
1.2
±
0.05
1.5
±
0.05
2.6
±
0.05
(0.2)
4.6±0.05
0.6±0.05
1.2
±
0.05
(0.2)
[Specifi cation No.]
(21) : Tin plating, emboss packaging
●Packaging Dimensions ●
Recommended PCB Dimensions(t=1.6mm)
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
9
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
Applicable Crimping Tool
Mating Dimensions
Types Part No. HRS No. Applicable Contact Remarks
Applicator
AP105-DF59-22P 901-4619-8 DF59-22PCFA
AP105-DF59M-2224P 901-4638-2 DF59M-2224PCF
DHS887200H-UP −
(Note 2) Manufactured by Japan Automatic Machine Co., Ltd.
AP105-DF59M-2628P 901-4639-5 DF59M-2628PCF
DHS887300H-UP −
(Note 2) Manufactured by Japan Automatic Machine Co., Ltd.
Press Unit CM-105C 901-0001-0 -
Hand Tool
HT801/DF59-22P 550-0404-7
DF59-22PCA
※UL1061 AWG#22 Only
HT801/DF59M-2224P 550-0420-3
DF59M-2224PC
※UL10368 AWG#22、24 Only
HT801/DF59M-2628P 550-0421-6
DF59M-2628PC
※UL10368 AWG#26、28 Only
Hand Tool
（W-to-B）
DF-C-PO(B) 550-0179-2 DF59-22PCFA
DF59-22PCA
DF-C-PO(A) 550-0170-8 DF59MSeries
Extraction Tool（B-to-B）
DF59SN-1P-FC/IN-TOOL
667-0040-2 DF59SN-1P-FC
Note 1 : Customers are strongly encouraged to utilize HRS application tooling or tooling created by a Hirose tooling partner.
Hirose assumes no liability for customers using tooling from non-recognized sources.
Note 2 : Please contact Japan Automatic Machine Co., Ltd. (hereinafter J.A.M.) through their website regarding crimping issues
when using applicators manufactured by J.A.M. URL http://www.jam-net.co.jp
●Board-to-board connection (floating plug)
[Standard]
DF59-*P-2FC
DF59-*S-2V
DF59-*S-2V
(2.8)
(0.5)
(17.1)
[Single contact type]
DF59S-1P-FC
Contact
portion
Contact
portion
Lock
portion
DF59S-1S-V DF59S-1S-V
(1.18)
(21.6)
(0.5)
(2.7)
●Short-circuit pin connection
[Single contact slim type]
DF59SN-1P-FC
DF59S-1S-V
DF59S-1S-V
(1.2)
(18.6)
(17.7)
(0.5)
(1.7)
Contact
portion
Contact
portion
Lock
portion
DF59-*P-2SP
DF59-*S-2V
(7.95)
(2.48)
[Single contact type]
●Wire-to-Board connection
[Standard]
DF59-*P-2C
DF59-*S-2V
(2.48)
DF59M-****PCF DF59M-1S-H
(1)
(1.2)
(5.9)
(2.2)
(2.6)
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
10
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
Operating Precautions
1. Recommended Temperature Profile
(Lead-free soldering possible)
2. Recommended Hand Solder
Conditions Soldering iron temperature : 350 ± 10ç, soldering time : within 3 seconds
3. Recommended Screen Thickness,
Open Ratio (Pattern Area Ratio) Thickness 0.1mm, Open ratio : 100%
4. Warpage of PC board Maximum of 0.02mm at the connector center, with both ends of the connector
as reference points.
5. Cleaning Condition Cleaning with IPA is possible. (Cleaning is not recommended. In case of
cleaning, please evaluate if it causes a decrease in the performance which
includes mechanical operation and environmental resistance.)
6. Precautions ■ When inserting crimp-type (solderless) terminals to crimping (solderless)
sockets, to maintain reliable performance, please do not insert obliquely.
■ DO NOT mate/un-mate a non-terminated plug with a non-mounted
receptacles. This may lead to damage or deformation of the contacts.
■ Please note that pulling on the wires or cable during un-mating may cause
damage.
■ DO NOT apply flux to the contact terminals when hand soldering the
receptacle to the board. Flux can wick into the electrical contact areas and
may lead to connection failures.
■ Slight discoloration on the insulating materials will not affect form, fit or
function of the connectors.
■ Please refer to the following for the points for proper handling regarding
mating/unmating operations.
“DF59 Insertion and Removal Manual”
“DF59S Insertion and Removal Manual” ATAD-H0651
“DF59SN Insertion and Removal Manual” ATAD-H0719
“DF59M Operation manual”ATAD-H0779
[Applicable Conditions]
1. Peak Temperature : MAX 250ç
2. Heated Area : 220ç or above, within 60 sec.
3. Pre-heating Area : 150 to 180ç, 90 to 120 sec.
4. Number of Times : within 2 times
*Measured at contact lead area
Please be noted that the reflow condition may vary depending on soldering
paste type, manufacturer of soldering material, board size, as well as conditions
of other mounting materials.
(*1) Above temperature profile is our recommended value.
50
60sec MAX
100
150
200
250
0
TEMPERATURE（ç）
PRE-HEATING TIME SOLDERING TIME
TIME（sec）
90 − 120sec
180ç
220ç
10sec MAX
MAX 250ç
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
11
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
MEMO :
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
12
DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 09/2017. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
USA:
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE
300 Brickstone Square Suite 201,
Andover, MA 01810
Phone : +1-978-662-5255
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
KOREA:
HIROSE KOREA CO.,LTD.
143, Gongdan 1-daero, Siheung-si,
Gyeonggi-do, 15084, Korea
Phone : +82-31-496-7000
Fax : +82-31-496-7100
http://www.hirose.co.kr/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Schoenbergstr. 20, 73760 ostfildern
Phone : +49-711-456002-1
Fax : +49-711-456002-299
http://www.hirose.com/eu/
FRANCE:
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
130 Avenue Joseph Kessel, Bat E, 78960
Voisins le Bretonneux, France
Phone : +33-1-85764886
Fax : +33-1-85764823
http://www.hirose.com/eu/
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
18, Enterprise Center Tower 2, 209# Gong He
Road, Jing’an District, Shanghai, CHINA 200070
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose.com/tw/
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose.com/hk/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
Office NO.552, Regus-Green Boulevard, Level5, Tower C,
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
03, Anson Road, #20-01, Springleaf Tower,
Singapore 079909
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose.com/sg/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
MALAYSIA:
PENANG REPRESENTATIVE OFFICE
73-3-1, Ideal@The One, Jalan Mahsuri, Bayan
Lepas Penang, 11950, Malaysia
Phone : +604-648-5536
http://www.hirose.com/sg/
THAILAND:
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
Mar.1.2021Copyright2021HIROSEELECTRICCO.,LTD.AllRightsReserved.
