Datasheet
For the latest technical information about
this product, including specifications,
dimensions, and wiring, see
www.bannerengineering.com.
QPMA
E
U
R
O
-
S
T
Y
L
E
•
P
I
G
T
A
I
L
•
P
U
R
•
C
A
B
L
E
C
A
L
L
F
A
C
T
O
R
Y
Contact Factory for more information.
• Rugged, cost-effective, and easy-to-install indicators available in K50
or K80 housing style
• Steady or pulsed sound indication
• Illuminated dome provides a big, easy-to-see green, red or yellow job
light
• Compact devices are completely self-contained - no controller needed
• Choose NPN or PNP input, depending on model
• Immune to EMI and RFI interference
• 18 to 30 V dc operation
• 5-pin M12/Euro-style connection listed
• Three color LED function: green, red, and yellow 1
Models Construction Audible Tone 2Inputs
K50LGRA1YPQ
50 mm dome/30 mm
mount polycarbonate
Steady (75 dB) PNP
K50LGRA1YNQ NPN
K50LGRA2YPQ Pulsed (75 dB) PNP
K50LGRA2YNQ NPN
K50LGRAL1YPQ
Loud Steady (95 dB)
PNP
K50LGRAL1YNQ NPN
K80LGRA1YPQ
50 mm dome/Flat or DIN-
mount polycarbonate,
nylon
Steady (75 dB) PNP
K80LGRA1YNQ NPN
K80LGRA2YPQ Pulsed (75 dB) PNP
K80LGRA2YNQ NPN
K80LGRAL1YPQ
Loud Steady (95 dB)
PNP
K80LGRAL1YNQ NPN
Integral QD models only are listed.
• To order the 150 mm PVC pigtail with QD model, replace Q with QP in the model number (example,
K50LGRA1YPQP).
•K50L Models: To order the 2 m (6.5 ft) cable model, omit the suffix Q from the model number (example,
K50LGRA1YP).
•K80L Models: to order the terminal-wired model, omit the suffix Q from the model number (example,
K80LGRA2YP).
• Models with a quick disconnect fitting require a mating cable (see the Accessories section).
1Contact factory for other colors and color combinations.
2Typical decibel level is at a distance of 1 m.
EZ-LIGHT™ Indicators — Audible
Original Document
135242 Rev. A 9 October 2014
135242
Specifications
Supply Voltage and Current
18 to 30 V dc at 40 mA maximum, per LED color (alarm)
Indicators
LEDs or audible independently selected: green, red, yellow
Input Response Time
Indicator ON/OFF: 10 ms (maximum)
Oscillation Frequency
A1 models: 3 kHz ± 500 Hz
A2 models: 3 kHz ± 500 Hz; pulse rate 3 Hz ± 20%
AL1 models: 2.7 kHz ± 500 Hz
Connections
Integral 5-pin M12/Euro-style quick disconnect fitting, or 150 mm PVC
pigtail with quick disconnect fitting, or 2 m (6.5 ft) integral cable,
depending on model
K80L Models: Terminal-wired models for use with bulk cable available
Construction
See Models table
Operating Conditions
−20 °C to +50 °C (−4 °F to +122 °F)
Environmental Rating
IP50
Certifications
(K50L models only)
Dimensions
K50L K80L
50.0 mm
(1.97")
38 mm (1.50")*
20 mm (0.79")
11 mm (0.43")
M30 x 1.5
(mounting nut
included)
Internal Threads
½ - 14 NPSM
Max. Torque 4.5 Nm
(40 in-lbf)
Max. Torque 2.25 Nm
(20 in-lbf)
109.5 mm
(4.31")
80.8 mm
(3.18")
66.3 mm
(2.61")
26.0 mm
(1.02")
M12 X 1
65.0 mm
(2.56")
65.0 mm
(2.56")
4X 8–32 UNC
Max. Torque 1.12 Nm (10 in–lbf)
4X Ø 5.5 mm (Ø 0.22")
Max. Torque 1.12 Nm (10 in–lbf)
with supplied screws
Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)
EZ-LIGHT™ Indicators — Audible
2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 135242 Rev. A
Wiring
PNP (Sourcing) Input NPN (Sinking) Input Key:
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
G = Green
R = Red
Y = Yellow
A = Alarm
Accessories
5-Pin Threaded M12/Euro-Style Cordsets (Single Ended)
Model Length Style Dimensions Pinout (Female)
MQDC1-501.5 0.50 m (1.5 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
5
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
MQDC1-506 1.83 m (6 ft)
MQDC1-515 4.57 m (15 ft)
MQDC1-530 9.14 m (30 ft)
MQDC1-506RA 1.83 m (6 ft)
Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDC1-515RA 4.57 m (15 ft)
MQDC1-530RA 9.14 m (30 ft)
K80L Brackets
SMBDX80DIN
Black reinforced thermoplastic
Bracket for mounting on a 35 mm DIN rail
89
89
K50L Brackets
EZ-LIGHT™ Indicators — Audible
P/N 135242 Rev. A www.bannerengineering.com - Tel: +1-763-544-3164 3
SMB30A
• Right-angle bracket with
curved slot for versatile
orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
• 12-ga. stainless steel
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
SMB30MM
• 12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMBAMS30RA
• Right-angle SMBAMS series
bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. (2.6 mm) cold-rolled
steel
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced
thermoplastic polyester
• Stainless steel mounting and
swivel locking hardware
included
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
SMB30FA
• Swivel bracket with tilt and
pan movement for precise
adjustment
• Mounting hole for 30 mm
sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to
extrude rail T-slot
• Metric and inch size bolt
available
A
B68.9
36.3
83.2
Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 -
1.5 x 50
Hole size: B= ø 30.1
SMBAMS30P
• Flat SMBAMS series bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. 300 series stainless
steel
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMB30FVK
• V-clamp, flat bracket and
fasteners for mounting to
pipe or extensions
• Clamp accommodates 28
mm dia. tubing or 1 in.
square extrusions
• 30 mm hole for mounting
sensors
46
118
A
Hole size: A= ø 31
SMB30RAVK
• V-clamp, right-angle bracket
and fasteners for mounting
sensors to pipe or extrusion
• Clamp accommodates 28
mm dia. tubing or 1 in.
square extrusions
• 30 mm hole for mounting
sensors
90
A
57
46
Hole size: A = ø 30.5
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following
the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture
which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty
does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
EZ-LIGHT™ Indicators — Audible
4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 135242 Rev. A
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR
TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE
PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any
obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
EZ-LIGHT™ Indicators — Audible
www.bannerengineering.com - Tel: +1-763-544-3164