72.362.6437.1 - WIELAND ELECTRIC

UL Recognized

UL Standard 1077 Component Recognition Program

as Protectors Supplementary

(Guide CCN/QVNU2, File E75596)

UL Standard 508 Switches, Industrial Control

(Guide CCN/NRNT2, File E148683)

UL Standard 1500 Protectors, Supplementary for

Marine Electrical & Fuel Systems

(Guide PEQZ2, File E75596)

Ignition Protection

UL Listed

UL Standard 489 Circuit Breakers, Molded Case,

(Guide DIVQ, File E189195)

UL Standard 489A Communications Equipment (Guide

CCN/DITT, File E189195)

CSA Accepted Component Supplementary

Protector under Class 3215 30,

FIle 047848 0 000 CSA

Standard C22.2 No. 235

TUV Certified EN60934, under License No.

R72040875

VDE Certified EN60934, VDE 0642 under File No.

10537

www.carlingtech.com 57

Agency Certifications

Designed specifically for world market applications, the B-series

utilizes the hydraulic magnetic principle which provides precise

operation and performance even when exposed to extremely

hot and/or cold application environments.

Typical applications include power supplies, medical equipment,

office equipment, control panels and marine equipment. In addi-

tion, these breakes meet CSA Standard 22.2 No. 100 for the

Generator & Welder markets.

1-6 poles, 0.02 - 50 amps, up to 277 VAC or 80 VDC, with

choice of time delays, terminals and actuator colors.

B-Series – General Specifications

www.carlingtech.com58

B-Series – General Specifications

Notes for Table A:

1 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.

2 Same as note 1, except that backup fuse is limited to 80A maximum.

3 2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.

Table A: Lists UL Recognized & CSA Certified configurations and performance capabilities as a Component Supplementary

Protector.

Electrical

www.carlingtech.com 59

B-Series – General Specifications

Electrical

Notes for Table B:

1 General Purpose Ratings for UL/CSA Only.

2 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.

3 Same as note 1, except that backup fuse is limited to 80 A maximum.

Table C: Lists UL Recognized, CSA Certified configurations and performance capabilities as Protectors, Supplementary for

Marine Electrical and Fuel Systems (CCN/Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft

Electrical Devices, Marine in accordance with ISO 8846 (CCN/Guide UZMK, File MQ1515) as Marine Supplementary Protectors.

Table D: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment

(CCN/Guide DITT, File E189195), under UL489A

Notes for Table C:

1 Available with special catalog number only (consult factory).

2 2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.

Table B: Lists UL Recognized, CSA, VDE & TUV Certified configurations & performance capabilities as a Component Supplementary

Protector.

Notes for Table D:

1 60 -90 amp ratings require parallel pole construction

www.carlingtech.com60

B-Series – General Specifications

Number of Poles 1 - 6 poles at 30 Amps or less. 1

and 2 poles at 31 Amps thru 50

Amps.

Internal Circuit Config. Series, (with or without auxiliary

switch), Shunt and Relay with cur-

rent or voltage trip coils, Dual Coil,

Switch Only (with or without auxiliary

switch).

Weight Approximately 65 grams/pole.

(Approximately 2.32 ounces/pole.)

Standard Colors Housing- Black; Actuator - See

Ordering Scheme.

MechanicalElectrical

Physical

Maximum Voltage 277VAC 50/60 Hz, 80VDC

Current Ratings Standard current coils: 0.100, 0.250,

0.500, 0.750, 1.00, 2.50, 5.00, 7.50,

10.0, 15.0, 20.0, 25.0, 30.0, 35.0,

40.0 and 50.0 amps. Other ratings

available, see ordering scheme.

Standard Voltage Coils DC - 6V, 12V; AC - 120V, other rat-

ings available, see ordering scheme.

Auxiliary Switch Rating SPDT; 10.1 AMPS - 250VAC,1.0A

65 VDC or 0.5A 80 VDC, 0.1 Amps -

125VAC (with gold contacts).

VDE-1.0 Amp - 125VAC.

Insulation Resistance Minimum of 100 Megohms at 500

VDC.

Dielectric Strength UL, CSA - 1500 V 50/60 Hz for one

minute between all electrically isolat-

ed terminals. B-Series circuit break-

ers comply with the 8mm spacing

and 3750V 50/60 Hz dielectric

requirements from hazardous volt-

age to operator accessible surfaces,

between adjacent poles and from

main circuits to auxiliary circuits per

Publications EN 60950 and VDE

0805.

Resistance, Impedance Values from Line to Load Terminal -

based on Series Trip Circuit Breaker.

Pulse Tolerance Curves

Endurance 10,000 ON-OFF operations @ 6 per

minute; with rated Current and

Voltage.

Trip Free All B-Series Circuit Breakers will trip

on overload, even when Handle is

forcibly held in the ON position.

Trip Indication The operating Handle moves posi-

tively to the OFF position when an

overload causes the breaker to trip.

Designed and tested in accordance with requirements of specifi-

cation MIL-PRF- 55629 and MIL-STD-202 as follows:

Shock Withstands 100 Gs, 6ms, sawtooth

while carrying rated current per

Method 213, Test Condition "I".

Instantaneous and ultra-short curves

tested @ 90% of rated current.

Vibration Withstands 0.060" excursion from

10-55 Hz, and 10 Gs 55-500 Hz, at

rated current per Method 204C,

Test Condition A. Instantaneous and

ultrashort curves tested at 90% of

rated current.

Moisture Resistance Method 106D, i.e., ten 24-hour

cycles @ + 25°C to +65°C, 80-98%

RH.

Salt Spray Method 101, Condition A (90-95%

RH @ 5% NaCl Solution, 96 hrs).

Thermal Shock Method 107D, Condition A (Five

cycles @ -55°C to +25°C to +85°C

to +25°C).

Operating Temperature -40° C to +85° C

Environmental

www.carlingtech.com 61

B-Series Handle UL Recognized – Ordering Scheme

020 0.020

025 0.025

030 0.030

035 0.035

040 0.040

045 0.045

050 0.050

055 0.055

060 0.060

065 0.065

070 0.070

075 0.075

080 0.080

085 0.085

090 0.090

095 0.095

210 0.100

215 0.150

220 0.200

225 0.250

230 0.300

235 0.350

240 0.400

245 0.450

250 0.500

255 0.550

260 0.600

265 0.650

270 0.700

275 0.750

280 0.800

285 0.850

290 0.900

295 0.950

410 1.000

512 1.250

415 1.500

517 1.750

420 2.000

522 2.250

425 2.500

527 2.750

430 3.000

435 3.500

440 4.000

445 4.500

450 5.000

455 5.500

460 6.000

465 6.500

470 7.000

475 7.500

480 8.000

485 8.500

490 9.000

495 9.500

610 10.000

710 10.500

611 11.000

711 11.500

612 12.000

712 12.500

613 13.000

614 14.000

615 15.000

616 16.000

617 17.000

618 18.000

620 20.000

622 22.000

624 24.000

625 25.000

630 30.000

635835.000

640840.000

645845.000

650850.000

Agency

Approval

Actuator

Color

1 1 AGENCY APPROVAL

CUL Recognized & CSA Accepted

DVDE Certified, UL Recognized & CSA Accepted

ETUV Certified, UL Recognized & CSA Accepted

IUL Rec. STD 1077, UL Rec. 1500 (ignition protected), & CSA Accepted

10 MOUNTING/BARRIERS

MOUNTING STYLE BARRIERS

Threaded Insert, 2 per pole

16-32 x 0.195 inches no

A6-32 X 0.195 inches

(multi-pole units only)

yes

2ISO M3 x 5mm no

BISO M3 x 5mm yes

Rectangular Adapter Plate with mounting centers of 2.062”

[52.37mm] and Threaded insert, 2 per pole

314 6-32 x 0.225 inches no

C14 6-32 X 0.225 inches

(multi-pole units only)

yes

414 ISO M3 x 6.5mm no

D14 ISO M3 x 6.5mm yes

Front panel Snap-In, 0.75” [19.05mm] wide bezel

5without Handleguard no

6without Handleguard

(multi-pole units only)

yes

Front panel Snap-In, 0.96” [24.48mm] wide bezel

7without Handleguard, 1-pole units 0.96” wide; no

multipole units have .105“ bezel overhang on all sides

8without Handleguard, 1-pole units 0.96” wide; yes

(multi-pole units only)

.105“ bezel overhang on all sides

8 TERMINAL9

110 Push-On 0.250 Tab (Q.C.)

2Screw 8-32 w/upturned lugs

311 Screw 8-32 (Bus Type)

4Screw 10-32 w/upturned lugs

511 Screw 10-32 (Bus Type)

6 Screw 8-32 w/upturned lugs

and 30° bend

7Screw 8-32 (Bus Type) and

30° bend

8 Screw 10-32 w/upturned lugs

and 30° bend

9Screw 10-32 (Bus Type) and

30° bend

BScrew M5 w/upturned lugs

CScrew M4 w/upturned lugs

E11 Screw M4 (Bus Type)

FScrew M5 w/upturned lugs

and 30° bend

GScrew M5 (Bus Type)

and 30° bend

HScrew M5 (Bus Type)

L12 0.250 Q.C./ Solder Lug

M11 M6 Threaded Studs

P13 Printed Circuit Board

Terminals

Q16 Push-In Stud

RScrew M4 w/upturned lugs

and 30° bend

S15 Push-On 0.110 Tab (Q.C.)

TScrew M4 (Bus Type)

and 30° bend

Aux/Alarm

Switch

5 AUXILIARY/ALARM SWITCH5

0w/o Aux Switch

1 S.P.D.T., 0.093 Q.C. Term.

2 S.P.D.T., 0.110 Q.C. Term.

3S.P.D.T., 0.139 Solder Lug

4S.P.D.T., 0.110 Q.C. Term.

(Gold Contacts)

5 S.P.S.T., 0.093 Q.C.

Term.(Gold Contacts)

6 S.P.S.T., 0.139 Solder Lug

7 S.P.S.T., 0.110 Q.C.

Term.(Gold Contacts)

8 S.P.S.T., 0.187 Q.C. Term.

9 S.P.D.T., 0.187 Q.C. Term.

3 POLES

1One

2Two 3Three

4Four 5Five

6Six

6 FREQUENCY & DELAY

032DC 50/60Hz, Switch Only

106DC Instantaneous

11 DC Ultra Short

12 DC Short

14 DC Medium

16 DC Long

20650/60Hz Instantaneous

21 50/60Hz Ultra Short

22 50/60Hz Short

24 50/60Hz Medium

26 50/60Hz Long

30 DC, 50/60Hz Instantaneous

31 DC, 50/60Hz Ultra Short

32 DC, 50/60Hz Short

34 DC, 50/60Hz Medium

36 DC, 50/60Hz Long

42750/60Hz Short, Hi-Inrush

44750/60Hz Medium, Hi-Inrush

46750/60Hz Long, Hi-Inrush

527DC, Short,Hi-Inrush

547DC, Medium, Hi-Inrush

567DC, Long, Hi-Inrush

4 CIRCUIT

A2Switch Only (No Coil)

BSeries Trip (Current)

CSeries Trip (Voltage)

D3Shunt Trip (Current)

E3Shunt Trip (Voltage)

F3Relay Trip (Current)

G3Relay Trip (Voltage)

H3,4 Dual Coil with Shunt Trip

Voltage Coil

J3,4 Dual Coil with Shunt Trip

Voltage Coil (side terminal)

K3,4 Dual Coil with Relay Trip

Voltage Coil

2 ACTUATOR1

AHandle, one per pole

BHandle, one per multipole unit

SMid-Trip Handle, one per pole

TMid-Trip Handle, one per pole & Alarm Switch

1 SERIES

Current Rating

Circuit

Poles

Actuator 10

Mounting/

Barriers

Terminal

Frequency

& Delay

Series

A3B010 450 1B 1 C

Notes:

1 Actuator Code:

A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units.

B: Handle location as viewed from front of breaker:

2 pole - left pole 3 pole - center pole

4 pole - two handles at center poles 5 pole - three handles at center poles

6 pole - four handles at center poles

S: Handle moves to mid-position only upon electrical trip of the breaker. Available with cir-

cuit codes B, C, D, E, F, G, H and K.

T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the

breaker. Available with circuit codes B & C.

2 Switch Only circuits, rated up to 50 amps and 6 poles, and only available with VDE

Certification when tied to a protected pole (Circuit Code B, C, D or H.), For .02 to 30

amps, select Current Code 630. For 35 - 50 amps, select Current Code 650.

3 Available with Terminal Codes 1, 2 and 3. Current Rating limited to 30 amps maximum.

4 Consult factory for available Dual Coil options, as special catalog number is required.

With Shunt construction, Dual Coils will trip instantaneously on line voltage. Dual coils

require 30VA minimum power to trip and are rated for intermittent duty only.

5 Auxiliary Switch breakers with Series Trip and Switch Only circuits. On multi-pole break-

ers, one aux. switch is supplied, mounted in the extreme right pole.

6 Separate pole type voltage coils not rated for continuous duty. Available only with delay

codes 10 and 20.

7 Available with Circuit Codes B & D only. VDE Certified to 30 amps. UL Recognized and

CSA Accepted to 50 amps.

8 VDE Certification available with single pole breakers with DC Delay only. UL Recognition

and CSA Accepted available in one and two pole breakers.

9 Screw Terminals are recommended on ratings greater than 20 amps. Ratings over 30

amps are only available with Terminal Codes 5, 9, G, H, M and Q.

10 VDE Certification up to 25 amps and UL Recognition and CSA Acceptance up to 30

amps, but not recommended over 20 amps.

11 Terminal Codes 3, 5 E and H (Bus Type) with VDE, are supplied with Lock Washers, and

Terminal Code M (M6 Threaded Stud) with VDE is supplied with Lock and Flat Washers.

These breakers are only VDE Certified when the washers are used.

12 VDE Cert. available up to 12 amps. UL Rec. & CSA Acceptance available up to 30 amps.

13 Single pole breakers with Terminal Code P (Printed Circuit Board) are available up to 30

amps with VDE Certification and 50 amps with UL Recognition and CSA Acceptance, with

Circuit Codes A, B and C. Two pole breakers with Terminal Code P (Printed Circuit

Board) are available up to 40 amps with UL Recognition and CSA Acceptance with Circuit

Codes A, B and C.

14 Available with Actuator Codes A, S and T.

15 Available with voltage coils only.

16 Terminal Code Q not available with VDE approvals.

9 ACTUATOR COLOR & LEGEND

I-O ON-OFF Dual Legend Color

White AB1Black

Black CD2White

Red FG3White

Green HJ4White

Blue KL5White

Yellow MN6 Black

Gray PQ7Black

Orange RS8Black

A06 6 DC

A12 12 DC

A18 18 DC

A24 24 DC

A32 32 DC

A48 48 DC

A65 65 DC

J06 6 AC

J12 12 AC

J18 18 AC

J24 24 AC

J48 48 AC

J65 65 AC

K20 120 AC

L40 240 AC

7 CURRENT RATING (AMPERES)

VOLTAGE COIL (NOMINAL RATED VOLTAGE)6

––– – –

www.carlingtech.com62

B-Series Handle UL489A – Ordering Scheme

Max. Appl.

Rating

Actuator

Color

9 ACTUATOR COLOR

LEGEND

ON-OFF Dual Legend Color

White B1Black

Black D2White

Red G3White

Green J4White

Blue L5White

Yellow N6Black

Gray Q7Black

Orange S8Black

10 MOUNTING/BARRIERS

MOUNTING STYLE BARRIERS

Threaded Insert, 2 per pole

16-32 x 0.195 inches no

A6-32 X 0.195 inches

(multi-pole units only)

yes

2ISO M3 x 5mm no

BISO M3 x 5mm

(multi-pole units only)

yes

Rectangular Adapter Plate with mounting centers of 2.062 inches

and Threaded insert, 2 per pole

36-32 x 0.225 inches no

C6-32 X 0.225 inches

(multi-pole units only)

yes

4ISO M3 x 6.5mm no

DISO M3 x 6.5mm

(multi-pole units only)

yes

Front panel Snap-In, 0.75” wide bezel

5without Handleguard no

6without Handleguard

(multi-pole units only)

yes

Front panel Snap-In, 0.96” wide bezel

7without Handleguard, 1-pole units 0.96” wide; no

multipole units have .105“ bezel overhang on all sides

8without Handleguard, 1-pole units 0.96” wide; yes

(multi-pole units only)

.105“ bezel overhang on all sides

8 TERMINAL4

15Push-On 0.250 Tab (Q.C.)

2Screw 8-32 w/upturned lugs

36Screw 8-32 (Bus Type)

4Screw 10-32 w/upturned lugs

56Screw 10-32 (Bus Type)

6 Screw 8-32 w/upturned lugs

and 30° bend

7Screw 8-32 (Bus Type) and

30° bend

8 Screw 10-32 w/upturned lugs

and 30° bend

9Screw 10-32 (Bus Type) and

30° bend

BScrew M5 w/upturned lugs

FScrew M5 w/upturned lugs

and 30° bend

GScrew M5 (Bus Type)

and 30° bend

HScrew M5 (Bus Type)

M6M6 Threaded Stud

P7Printed Circuit Board

Terminals

Q8Push-In Stud

210 0.100

215 0.150

220 0.200

225 0.250

230 0.300

235 0.350

240 0.400

245 0.450

250 0.500

255 0.550

260 0.600

265 0.650

270 0.700

275 0.750

280 0.800

285 0.850

290 0.900

295 0.950

410 1.000

512 1.250

415 1.500

517 1.750

420 2.000

522 2.250

527 2.750

430 3.000

435 3.500

440 4.000

445 4.500

450 5.000

455 5.500

460 6.000

465 6.500

470 7.000

475 7.500

480 8.000

485 8.500

490 9.000

495 9.500

610 10.000

710 10.500

611 11.000

711 11.500

612 12.000

712 12.500

613 13.000

614 14.000

615 15.000

616 16.000

617 17.000

618 18.000

620 20.000

622 22.000

624 24.000

625 25.000

630 30.000

635335.000

640340.000

645345.000

650350.000

Aux/Alarm

Switch

5 AUXILIARY/ALARM SWITCH2

0w/o Aux Switch

1 S.P.D.T., 0.093 Q.C. Term.

2 S.P.D.T., 0.110 Q.C. Term.

3S.P.D.T., 0.139 Solder Lug

7 S.P.S.T., 0.110 Q.C.

Term.(Gold Contacts)

8 S.P.S.T., 0.187 Q.C. Term.

9 S.P.D.T., 0.187 Q.C. Term.

3 POLES

1One 2Two 3Three 4Four

6 FREQUENCY & DELAY4

11 DC Ultra Short

12 DC Short

14 DC Medium

16 DC Long

52 DC, Short,Hi-Inrush

54 DC, Medium, Hi-Inrush

56 DC, Long, Hi-Inrush

4 CIRCUIT

BSeries Trip (Current)

2 ACTUATOR1

AHandle, one per pole

BHandle, one per multipole unit

SMid-Trip Handle, one per pole

TMid-Trip Handle, one per pole & Alarm Switch

1 SERIES

Current Rating

Circuit

Poles

Actuator 10

Mounting/

Barriers

Terminal

Frequency

& Delay

Series

A1B014 450 1B 1 M

Notes:

1 Actuator Code:

A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units.

S: Handle moves to mid-position only upon electrical trip of the breaker.

T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the

breaker.

2 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right

pole.

3 VDE Certification available with single pole breakers only. UL489A Listing available with

one and two pole breakers.

4 Screw Terminals are recommended on ratings greater than 20 amps. Ratings over 30

amps are only available with Terminal Codes 5, 9, G, H, M and Q.

5 Terminal Code 1 (Push-On) available up to 25 amps with TUV or VDE Certification and 30

amps with UL489A Listing, but is not recommended over 20 amps.

6 Terminal Codes 3, 5 and H (Bus Type) with TUV or VDE, are supplied with Lock Washers,

and Terminal Code M (M6 Threaded Stud) with TUV or VDE is supplied with Lock and

Flat Washers. These breakers are only TUV or VDE Certified when the washers are

used.

7 Single pole breakers with Terminal Code P (Printed Circuit Board) are available up to 30

amps with VDE Certification and 50 amps with UL489A Listing.

8 Terminal Code Q not available with VDE approvals.

Agency

Approval

11 MAXIMUM APPLICATION RATING

M80 DC

12 AGENCY APPROVAL

TUL489A Listed

KUL489A Listed, VDE Certified

JUL489A Listed, TUV Certified

7 CURRENT RATING (AMPERES)

–––– –

www.carlingtech.com 63

B-Series Handle UL489 Listed – Ordering Scheme

Max. Appl.

Rating

Actuator

Color

9 ACTUATOR COLOR6

LEGEND

ON-OFF Dual Legend Color

White B1Black

Black D2White

Red G3White

Green J4White

Blue L5White

Yellow N6Black

Gray Q7Black

Orange S8Black

10 MOUNTING/BARRIERS

MOUNTING STYLE BARRIERS9

Threaded Insert, 2 per pole

A6-32 X 0.195 inches yes

BISO M3 x 5mm yes

Rectangular Adapter Plate with mounting centers of 2.062 inches

and Threaded insert, 2 per pole

C6-32 X 0.225 inches yes

DISO M3 x 6.5mm yes

Front panel Snap-In, 0.75” wide bezel

6without Handleguard yes

Front panel Snap-In, 0.96” wide bezel

8without Handleguard, 1-pole units 0.96” wide; yes

.105“ bezel overhang on all sides

8 TERMINAL5

1Push-On 0.250 Tab (Q.C.)

2Screw 8-32 w/upturned lugs

3Screw 8-32 (Bus Type)

4Screw 10-32 w/upturned lugs

5Screw 10-32 (Bus Type)

6 Screw 8-32 w/upturned lugs

and 30° bend

7Screw 8-32 (Bus Type) and

30° bend

8 Screw 10-32 w/upturned lugs

and 30° bend

9Screw 10-32 (Bus Type) and

30° bend

ALoad Terminal: #8 Screw/QC

Combination. (Special Cat.#)

BScrew M5 w/upturned lugs

FScrew M5 w/upturned lugs

and 30° bend

GScrew M5 (Bus Type)

and 30° bend

HScrew M5 (Bus Type)

MM6 Threaded Stud

QPush-In Stud

210 0.100

215 0.150

220 0.200

225 0.250

230 0.300

235 0.350

240 0.400

245 0.450

250 0.500

255 0.550

260 0.600

265 0.650

270 0.700

275 0.750

280 0.800

285 0.850

290 0.900

295 0.950

410 1.000

512 1.250

415 1.500

517 1.750

420 2.000

522 2.250

527 2.750

430 3.000

435 3.500

440 4.000

445 4.500

450 5.000

455 5.500

460 6.000

465 6.500

470 7.000

475 7.500

480 8.000

485 8.500

490 9.000

495 9.500

610 10.000

710 10.500

611 11.000

711 11.500

612 12.000

712 12.500

613 13.000

614 14.000

615 15.000

616 16.000

617 17.000

618 18.000

620 20.000

622 22.000

624 24.000

625 25.000

630 30.000

Aux/Alarm

Switch

5 AUXILIARY/ALARM SWITCH4

0w/o Aux Switch

1 S.P.D.T., 0.093 Q.C. Term.

2 S.P.D.T., 0.110 Q.C. Term.

3S.P.D.T., 0.139 Solder Lug

8 S.P.S.T., 0.187 Q.C. Term.

9 S.P.D.T., 0.187 Q.C. Term.

3 POLES2

1One 2Two 33Three

6 FREQUENCY & DELAY

21 AC Ultra Short

22 AC Short

24 AC Medium

26 AC Long

42 AC, Short,Hi-Inrush

44 AC, Medium, Hi-Inrush

46 AC, Long, Hi-Inrush

4 CIRCUIT

BSeries Trip (Current)

2 ACTUATOR1

AHandle, one per pole

BHandle, one per mulit-pole unit

SMid-Trip Handle, one per pole

TMid-Trip Handle, one per pole & Alarm Switch

1 SERIES

Circuit

Poles

Actuator 10

Mounting/

Barriers

Terminal

Frequency

& Delay

Series

A 1 B 0 24 450 1 B A K

Agency

Approval

11 MAXIMUM APPLICATION RATING

C8120/240VAC

K120VAC

12 AGENCY APPROVAL

GUL489 Listed

3UL489 Listed, TUV Certified

7 CURRENT RATING (AMPERES)

Current Rating

Notes:

1 Actuator Code:

A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units.

B: Handle location as viewed from front of breaker:

2 pole - left pole 3 pole - center pole

S: Handle moves to mid-position only upon electrical trip of the breaker. Available with cir-

cuit codes B, C, D, E, F, G, H and K.

T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the

breaker. Available with circuit codes B & C.

2 All poles must be same polarity.

3 3 pole units available only when 1 of 3 poles is neutral.

4 Auxiliary/Alarm Switch circuit must be same polarity as the main circuit. On multi-pole

breakers, one aux. switch is supplied, mounted in the extreme right pole.

5 Screw Terminals are recommended on ratings greater than 20 amps.

6 Standard actuator colors are black and white.

7 Adapter plate with mounting centers of 2.082 inches. Available with Actuator Codes A, S

and T.

8 Voltage Rating available with 2 and 3-pole breakers only.

9 Barriers supplied on multi-pole units only.

–––––

www.carlingtech.com64

B-Series Rocker UL489 Listed – Ordering Scheme

210 0.100

215 0.150

220 0.200

225 0.250

230 0.300

235 0.350

240 0.400

245 0.450

250 0.500

255 0.550

260 0.600

265 0.650

270 0.700

275 0.750

280 0.800

285 0.850

290 0.900

295 0.950

410 1.000

512 1.250

415 1.500

517 1.750

420 2.000

522 2.250

527 2.750

430 3.000

435 3.500

440 4.000

445 4.500

450 5.000

455 5.500

460 6.000

465 6.500

470 7.000

475 7.500

480 8.000

485 8.500

490 9.000

495 9.500

610 10.000

710 10.500

611 11.000

711 11.500

612 12.000

712 12.500

613 13.000

614 14.000

615 15.000

616 16.000

617 17.000

618 18.000

620 20.000

622 22.000

624 24.000

625 25.000

630 30.000

Max. Appl.

Rating

Actuator

Color

11 MAXIMUM APPLICATION RATING

C8120/240 VAC

K120 VAC

8 TERMINAL5

16Push-On 0.250 Tab (Q.C.)

2Screw 8-32 w/upturned lugs

3Screw 8-32 (Bus Type)

4Screw 10-32 w/upturned lugs

5Screw 10-32 (Bus Type)

6 Screw 8-32 w/upturned lugs

and 30° bend

7Screw 8-32 (Bus Type) and

30° bend

8 Screw 10-32 w/upturned lugs

and 30° bend

9Screw 10-32 (Bus Type) and

30° bend

BScrew M5 w/upturned lugs

CScrew M4 w/upturned lugs

FScrew M5 w/upturned lugs

and 30° bend

GScrew M5 (Bus Type)

and 30° bend

HScrew M5 (Bus Type)

Aux/Alarm

Switch

3 POLES1,2

1One 2Two 33Three

6 FREQUENCY & DELAY

21 AC Ultra Short

22 AC Short

24 AC Medium

26 AC Long

42 AC, Short,Hi-Inrush

44 AC, Medium, Hi-Inrush

46 AC, Long, Hi-Inrush

4 CIRCUIT

BSeries Trip (Current)

1 SERIES

Current Rating

Circuit

Poles

Actuator 10

Mounting/

Barriers

Terminal

Frequency

& Delay

Series

F 1 B024 630 23 A K

Notes:

1 Multi-pole breakers have all breakers identical except when specifying Aux. switch

and/or mixed poles, and have one rocker per breaker.

2 All poles must be same polarity.

3 3 pole units available only when1 of 3 poles is neutral.

4 On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole.

5 Screw Terminals are recommended on ratings greater than 20 amps.

6 Terminal Code 1 (Push-On) available up to 30 amps, but are not recommended over 20

amps.

7 Dual legend = ON-OFF/I-O

8 Voltage Rating available with 2 and 3-pole breakers only.

9 Barriers supplied on multi-pole units only.

5 AUXILIARY/ALARM SWITCH4

0w/o Aux Switch

1S.P.D.T., 0.093 Q.C. Term.

2S.P.D.T., 0.110 Q.C. Term.

3S.P.D.T., 0.139 Solder Lug

7 S.P.S.T., 0.110 Q.C.

Term.(Gold Contacts)

8 S.P.S.T., 0.187 Q.C. Term.

9 S.P.D.T., 0.187 Q.C. Term.

7 CURRENT RATING (AMPERES)

9 ACTUATOR COLOR & LEGEND

Actuator or

Visi-Color

Marking Marking Color:

ON-OFF Dual

Single Color Visi-Rocker

White B1Black White

Black D2White n/a

Red G3White Red

Green J4White Green

Blue L5White Blue

Yellow N6Black Yellow

Gray Q7Black Gray

Orange S8Black Orange

–––––

Agency

Approval

11 AGENCY APPROVAL

GUL489 Listed

2 ACTUATOR

Two Color Visi-Rocker

CIndicate ON,

vertical legend

DIndicate ON,

horizontal legend

FIndicate OFF,

vertical legend

GIndicate OFF,

horizontal legend

Single color

JVertical legend

KHorizontal legend

Push-To-Reset, Visi-Rocker

NIndicate OFF,

vertical legend

OIndicate OFF,

horizontal legend

Push-To-Reset , Single color

RVertical legend

UHorizontal legend

10 MOUNTING/BARRIERS

STANDARD ROCKER BEZEL BARRIERS9

Threaded Insert, 2 per pole

A6-32 X 0.195 inches yes

BISO M3 x 5mm yes

ROCKERGUARD BEZEL

Threaded Insert, 2 per pole

C6-32 x 0.195 inches yes

DISO M3 x 5mm yes

www.carlingtech.com 65

B-Series Flat Rocker UL489 Listed – Ordering Scheme

210 0.100

215 0.150

220 0.200

225 0.250

230 0.300

235 0.350

240 0.400

245 0.450

250 0.500

255 0.550

260 0.600

265 0.650

270 0.700

275 0.750

280 0.800

285 0.850

290 0.900

295 0.950

410 1.000

512 1.250

415 1.500

517 1.750

420 2.000

522 2.250

527 2.750

430 3.000

435 3.500

440 4.000

445 4.500

450 5.000

455 5.500

460 6.000

465 6.500

470 7.000

475 7.500

480 8.000

485 8.500

490 9.000

495 9.500

610 10.000

710 10.500

611 11.000

711 11.500

612 12.000

712 12.500

613 13.000

614 14.000

615 15.000

616 16.000

617 17.000

618 18.000

620 20.000

622 22.000

624 24.000

625 25.000

630 30.000

Max. Appl.

Rating

Actuator

Color

11 MAXIMUM APPLICATION RATING

C11 120/240 VAC

K120 VAC

8 TERMINAL6

17Push-On 0.250 Tab (Q.C.)

2Screw 8-32 w/upturned lugs

3Screw 8-32 (Bus Type)

4Screw 10-32 w/upturned lugs

5Screw 10-32 (Bus Type)

6 Screw 8-32 w/upturned lugs

and 30° bend

7Screw 8-32 (Bus Type) and

30° bend

8 Screw 10-32 w/upturned lugs

and 30° bend

9Screw 10-32 (Bus Type) and

30° bend

BScrew M5 w/upturned lugs

CScrew M4 w/upturned lugs

FScrew M5 w/upturned lugs

and 30° bend

GScrew M5 (Bus Type)

and 30° bend

HScrew M5 (Bus Type)

Aux/Alarm

Switch

3 POLES2,3

1One 2Two 34Three

6 FREQUENCY & DELAY

21 AC Ultra Short

22 AC Short

24 AC Medium

26 AC Long

42 AC, Short,Hi-Inrush

44 AC, Medium, Hi-Inrush

46 AC, Long, Hi-Inrush

4 CIRCUIT

BSeries Trip (Current)

1 SERIES

Current Rating

Circuit

Poles

Actuator 10

Mounting/

Barriers

Terminal

Frequency

& Delay

Series

1 1 B024 630 23 A K

Notes:

1 Push-To-Reset actuators have OFF portion of rocker shrouded.

2 Multi-pole breakers have all breakers identical except when specifying Aux. switch

and/or mixed poles, and have one rocker per breaker.

3 All poles must be same polarity.

4 3 pole units available only when1 of 3 poles is neutral.

5 On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole.

6 Screw Terminals are recommended on ratings greater than 20 amps.

7 Terminal Code 1 (Push-On) available up to 30 amps, but are not recommended over 20

amps.

8 Color shown is visi and legend with remainder of rocker black, Dual = ON-OFF/I-O leg-

end.

9 Legend on Push-to-reset bezel/shroud is white with single color actuator codes 7 & 8.

Legend on Push-To-Reset bezel/shroud matches Visi-Color of rocker with actuator

codes 5 & 6.

10 Recessed “off-side” available with actuator codes 1, 2, 3 & 4. Legends on rocker are

available in ink stamping only.

11 Voltage rating available with 2 & 3-pole breakers only.

12 Barriers supplied on multi-pole units only.

5 AUXILIARY/ALARM SWITCH5

0w/o Aux Switch

1S.P.D.T., 0.093 Q.C. Term.

2S.P.D.T., 0.110 Q.C. Term.

3S.P.D.T., 0.139 Solder Lug

7 S.P.S.T., 0.110 Q.C.

Term.(Gold Contacts)

8 S.P.S.T., 0.187 Q.C. Term.

9 S.P.D.T., 0.187 Q.C. Term.

2 ACTUATOR 1

Two Color Visi-Rocker

1Indicate OFF, vertical legend

2Indicate OFF, horizontal legend

Single color

3Vertical legend

4Horizontal legend

Push-To-Reset, Visi-Rocker

5Indicate OFF, vertical legend

6Indicate OFF, horizontal legend

Push-To-Reset , Single color

7Vertical legend

8Horizontal legend

7 CURRENT RATING (AMPERES)

9 ACTUATOR COLOR & LEGEND

Actuator or

Visi-Color

Marking Marking Color:

ON-OFF Dual

Single Color Visi-Rocker

White B1Black White

Black D2White n/a

Red G3White Red

Green J4White Green

Blue L5White Blue

Yellow N6Black Yellow

Gray Q7Black Gray

Orange S8Black Orange

10 MOUNTING/BARRIERS9BARRIERS12

STANDARD ROCKER BEZEL,

Threaded Insert, 2 per pole

FLAT ROCKER ACTUATOR

A6-32 X 0.195 inches yes

BISO M3 x 5mm yes

RECESSED OFF SIDE ROCKER ACTUATOR

E6-32 x 0.195 inches yes

FISO M3 x 5mm yes

PUSH-TO-RESET BEZEL,

Threaded Insert, 2 per pole

C6-32 x 0.195 inches yes

DISO M3 x 5mm yes

–––––

Agency

Approval

12 AGENCY APPROVAL

GUL489 Listed

www.carlingtech.com66

B-Series Handle – Circuit & Terminal Diagrams

Notes:

1 All dimensions are in inches [millimeters].

2 Tolerance ±.020 [.51] unless otherwise specified.

3 Alarm Switch available with .110 x .020 Q.C. & Solder Lug Terminals Only.

www.carlingtech.com 67

B-Series Handle – Circuit & Terminal Diagrams

Notes:

1 All dimensions are in inches [millimeters].

2 Tolerance ±.020 [.51] unless otherwise specified.

www.carlingtech.com68

B-Series Handle – Front Panel Snap-In Mounting Style 5

Notes:

1 All dimensions are in inches [millimeters].

2 Tolerance ±.020 [.51] unless otherwise specified.

www.carlingtech.com 69

B-Series Handle – Front Panel Snap-in Mounting Style 5

Notes:

1 All dimensions are in inches [millimeters].

2 Recommended panel thickness: .040 [1.02] to .100 [2.54].

3 Tolerance ±.020 [.51] unless otherwise specified.

www.carlingtech.com70

B-Series Handle – Front Panel Snap-In Mounting Style 7

Notes:

1 All dimensions are in inches [millimeters].

2 Recommended panel thickness .040 [1.02] to .100 [2.54].

3 Tolerance ±.020 [.51] unless otherwise specified.

www.carlingtech.com 71

B-Series PC Terminal Diagrams

Notes:

1 All dimensions are in inches [millimeters].

2 For pole orientation with horizontal legend, rotate front view clockwise 90°.

3 Tolerance ±.010 [.25] unless otherwise specified.

www.carlingtech.com72

B-Series Rocker UL489 Listed – Form & Fit Drawings

Notes:

1 Dimensions apply to all variations shown. Notice that circuit breaker line & load terminal

orientation on indicate “OFF” is opposite of indicate “ON”.

2 For pole orientation with horizontal legend, rotate front view clockwise 90°.

3 All dimensions are in inches [millimeters].

4 Tolerance ±.020 [.51] unless otherwise specified.

www.carlingtech.com 73

B-Series Flat Rocker UL489 Listed – Form & Fit Drawings

Notes:

1 All dimensions are in inches [millimeters].

2 For pole orientation with horizontal legend, rotate front view clockwise 90°.

3 Tolerance ±.020 [.51] unless otherwise specified.