T-13/4 Super Ultra-Bright LED
Lamps
Technical Data
HLMP-C115
HLMP-C117 HLMP-C123
HLMP-C215 HLMP-C223
HLMP-C315 HLMP-C323
HLMP-C415 HLMP-C423
HLMP-C515 HLMP-C523
HLMP-C615 HLMP-C623
Features
• Very High Intensity
• Exceptional Uniformity
• Microtint Lens for Color
Identification
• Consistent Viewability
All Colors:
AlGaAs Red
High Efficiency Red
Yellow
Orange
Green
Emerald Green
• 15° and 25° Family
• Tape and Reel Options
Available
• Binned for Color and
Intensity
Applications
• Ideal for Backlighting Front
Panels*
• Used for Lighting Switches
• Adapted for Indoor and
Outdoor Signs
Description
These non-diffused lamps are
designed to produce a bright light
source and smooth radiation pat-
tern. A slight tint is added to the
lens for easy color identification.
This lamp has been designed with
a 20 mil lead frame, enhanced
flange, and tight meniscus
controls, making it compatible
with radial lead automated
insertion equipment.
2
Selection Guide
Part Number Luminous Intensity Iv (mcd)
Color 2θ1/2[1] Standoff Leads HLMP- Min. Max.
DH AS AlGaAs 15 No C115 290.0 –
C115-O00xx 290.0 –
C115-OP0xx 290.0 1000.0
Yes C117-OP0xx 290.0 1000.0
25 No C123 90.2 –
C123-L00xx 90.2 –
Red 15 No C215 138.0 –
C215-M00xx 138.0 –
C215-MN0xx 138.0 400.0
25 No C223 90.2 –
C223-L00xx 90.2 –
C223-MN0xx 138.0 400.0
Yellow 15 No C315 147.0 –
C315-L00xx 147.0 –
C315-LM0xx 147.0 424.0
25 No C323 96.2 –
C323-K00xx 96.2 –
C323-KL0xx 96.2 294.0
Orange 15 No C415 138.0 –
C415-M00xx 138.0 –
C415-M0D0xx 138.0 –
C415-MN0xx 138.0 400.0
25 No C423 90.2 –
C423-L00xx 90.2 –
C423-LM0xx 90.2 276.0
Green 15 No C515 170.0 –
C515-L00xx 170.0
C515-LM0xx 170.0 490.0
25 No C523 69.8 –
C523-J00xx 69.8 –
C523-KL0xx 111.7 340.0
Emerald Green 15 No C615 17.0 –
C615-G00xx 17.0 –
25 No C623 6.7 –
C623-E00xx 6.7 –
3
Part Numbering System
HLMP - C x xx - x x x xx
Mechanical Options
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B2: Right Angle Housing, Even Leads
UQ: Ammo Pack, Horizontal Leads
Color Bin Options
0: Full Color Bin Distribution
D: Color Bins 4 & 5 only
Maximum Iv Bin Options
0: Open (No Maximum Limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle & Standoffs Options
15: 15 Degree, without Standoffs
17: 15 Degree, with Standoffs
23: 25 Degree, without Standoffs
Color Options
1. AS AlGaAs Red
2. High Efficiency Red
3. Yellow
4. Orange
5. Green
6. Emerald Green
Package Options
C: T-1 3/4 (5 mm)
4
Package Dimensions
Absolute Maximum Ratings at TA = 25°C
High
High Performance
DH AS Efficiency Green and
AlGaAs Red and Emerald
Parameter Red Orange Yellow Green Units
DC Forward Current[1] 30 30 20 30 mA
Transient Forward Current[2] 500 500 500 500 mA
(10 µsec Pulse)
Reverse Voltage (Ir = 100 µA) 5 5 5 5 V
LED Junction Temperature 110 110 110 110 °C
Operating Temperature Range –20 to +100 –55 to +100 –20 to +100 °C
Storage Temperature Range –55 to +100 °C
Lead Soldering Temperature 260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Notes:
1. See Figure 5 for maximum current derating vs. ambient temperature.
2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire
bond.
1.14 ± 0.20
(0.045 ± 0.008)
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244)
MIN.
0.70 (0.028)
MAX.
1.00
(0.039)MIN.
8.71 ± 0.20
(0.343 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)SQ. TYP.
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT
0.5 mm (0.020 in.) DOWN THE LEADS.
CATHODE
LEAD
1.85 (0.073)
MAX.
CATHODE
FLAT
(NOTE 1)
HLMP-Cx15 and HLMP-Cx23 HLMP-Cx17
1.14 ± 0.20
(0.045 ± 0.008)
5.80 ± 0.20
(0.228 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
31.60
(1.244)
MIN.
0.70 (0.028)
MAX.
1.00
(0.039)MIN.
8.71 ± 0.20
(0.343 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
0.50 ± 0.10
(0.020 ± 0.004)SQ. TYP.
CATHODE
LEAD
CATHODE
FLAT
1.50 ± 0.15
(0.059 ± 0.006)
12.60 ± 0.18
(0.496 ± 0.007)
5
Optical Characteristics at TA = 25°C
Luminous Color, Viewing
Intensity Peak Dominant Angle Luminous
Iv (mcd) Wavelength Wavelength 2θ1/2 Efficacy
@ 20 mA[1] λpeak (nm) λd[2] (nm) (Degrees)[3] ηv
Part Number Min. Typ. Typ. Typ. Typ. (lm/w)
HLMP-C115 290 600 645 637 11 80
HLMP-C117
HLMP-C123 90 200 26
HLMP-C215 138 300 635 626 17 145
90 170 23
HLMP-C315 146 300 583 585 17 500
96 170 25
HLMP-C415 138 300 600 602 17 380
90 170 23
HLMP-C515 170 300 568 570 20 595
69 170 28
HLMP-C615 17 45 558 560 20 656
627 28
Notes:
1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern
may not be aligned with this axis.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
HLMP-C223
HLMP-C323
HLMP-C423
HLMP-C523
HLMP-C623
Electrical Characteristics at TA = 25°C
Forward Reverse Capacitance Speed of Response
Voltage Breakdown C (pF) Thermal τs (ns)
Vf (Volts) Vr (Volts) Vf = 0 Resistance Time Constant
@ If = 20 mA @ Ir = 100 µA f = 1 MHz RθJ-PIN e-t/τs
Part Number Typ. Max. Min. Typ. (°C/W) Typ.
HLMP-C115 1.8 2.2 5 30 210 30
HLMP-C117
HLMP-C123
HLMP-C215 1.9 2.6 5 11 210 90
HLMP-C223
HLMP-C315 2.1 2.6 5 15 210 90
HLMP-C323
HLMP-C415 1.9 2.6 5 4 210 280
HLMP-C423
HLMP-C515 2.2 3.0 5 18 210 260
HLMP-C523
HLMP-C615 2.2 3.0 5 18 210 260
HLMP-C623
6
Figure 1. Relative Intensity vs. Wavelength.
Figure 2. Forward Current vs. Forward Voltage (Non-resistor Lamp).
Figure 3. Relative Luminous Intensity vs. Forward Current.
ORANGE
HIGH EFFICIENCY RED
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.5
0
500 550 600 650 700 750
YELLOW
EMERALD GREEN
HIGH
PERFORMANCE
GREEN
T
A
= 25° C
TS AlGaAs RED
DH As AlGaAs RED
I
F
– FORWARD CURRENT – mA
1.0 3.5
300.0
5.0
0.1
V
F
– FORWARD VOLTAGE – V
1.5 2.0 2.5 3.0
10.0
2.0
1.0
0.2
0.50
0.5
20.0
50.0
100.0
200.0 DH As AlGaAs RED
TS AlGaAs RED
0
100
80
60
40
20
IF – FORWARD CURRENT – mA
2.0 4.03.01.0
VF – FORWARD VOLTAGE – V
0 5.0
YELLOW
HIGH EFFICIENCY RED, ORANGE,
YELLOW, AND HIGH PERFORMANCE
GREEN, EMERALD GREEN
HIGH
EFFICIENCY
RED/ORANGE
HIGH 
PERFORMANCE 
GREEN,
EMERALD GREEN
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
0.1
0.01
IF – DC FORWARD CURRENT – mA
15
5.0
0.2
0.05
0.2 2 50
1.0
10
0.02
0.1
0.5
2.0
0.5 2030
DH As AlGaAs RED
TS AlGaAs RED
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
0
0
I
DC
– DC CURRENT PER LED – mA
10 20
1.6
0.8
0.4
515 30
1.2
25
0.2
0.6
1.0
1.4
HER, ORANGE, YELLOW, AND HIGH
PERFORMANCE GREEN, EMERALD GREEN
7
Figure 5. Maximum Forward dc Current vs. Ambient Temperature. Derating Based on TjMAX = 110°C
Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.
Figure 6. Relative Luminous Intensity vs. Angular Displacement. 15 Degree Family.
I
F
– FORWARD CURRENT – mA
0
0
T
A
– AMBIENT TEMPERATURE – °C
40 80
40
20
10
20 60
30
100
5
15
25
35
DH As AlGaAs RED
Rθ
JA
= 559° C/W
Rθ
JA
= 689° C/W
I
F
– FORWARD CURRENT – mA
0
0
T
A
– AMBIENT TEMPERATURE – °C
40 80
40
20
10
20 60
30
100
5
15
25
35
HER, ORANGE, YELLOW, AND HIGH
PERFORMANCE GREEN, EMERALD GREEN
Rθ
JA
= 470° C/W
Rθ
JA
= 705° C/W
Rθ
JA
= 300° C/W
YELLOW
HER, ORANGE, GREEN,
EMERALD GREEN
NORMALIZED LUMINOUS INTENSITY
1
0
ANGULAR DISPLACEMENT – DEGREES
0.8
0.6
0.5
0.7
0.2
45
0.1
0.3
0.4
40 35 30 25 20 10 5 015 -5 -10 -15 -20 -25 -30 -35 -40 -45
0.9
RELATIVE EFFICIENCY
(NORMALIZED AT 20 mA)
0
I
PEAK
– PEAK FORWARD CURRENT – mA
0
0.6
0.8
30020 100
1.2
1.0
0.2
0.4
50 20010
DH As AlGaAs RED
η
PEAK
– RELATIVE EFFICIENCY
(NORMALIZED AT 20 mA)
0
I
PEAK
– PEAK FORWARD CURRENT – mA
0.4
0.6
0.8
1.0
9020 705040
1.3
1.1
HIGH PERFORMANCE GREEN
YELLOW
HIGH EFFICIENCY
RED/ORANGE
HER, ORANGE, YELLOW, HIGH
PERFORMANCE GREEN, EMERALD GREEN
0.5
0.7
0.9
1.2
30 60 8010
EMERALD GREEN
8
Intensity Bin Limits
Intensity Range (mcd)
Color Bin Min. Max.
L 101.5 162.4
M 162.4 234.6
N 234.6 340.0
O 340.0 540.0
P 540.0 850.0
Q 850.0 1200.0
Red/Orange R 1200.0 1700.0
S 1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
L 173.2 250.0
M 250.0 360.0
N 360.0 510.0
O 510.0 800.0
P 800.0 1250.0
Yellow Q 1250.0 1800.0
R 1800.0 2900.0
S 2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
Figure 7. Relative Luminous Intensity vs. Angular Displacement. 25 Degree Family.
NORMALIZED LUMINOUS INTENSITY
1
0
ANGULAR DISPLACEMENT – DEGREES
0.8
0.6
0.5
0.7
0.2
45
0.1
0.3
0.4
40 35 30 25 20 10 5 015 -5 -10 -15 -20 -25 -30 -35 -40 -45
0.9
9
Color Categories
Lambda (nm)
Color Category # Min. Max.
6 561.5 564.5
5 564.5 567.5
Green 4 567.5 570.5
3 570.5 573.5
2 573.5 576.5
1 582.0 584.5
3 584.5 587.0
Yellow 2 587.0 589.5
4 589.5 592.0
5 592.0 593.0
1 597.0 599.5
2 599.5 602.0
3 602.0 604.5
Orange 4 604.5 607.5
5 607.5 610.5
6 610.5 613.5
7 613.5 616.5
8 616.5 619.5
Intensity Bin Limits, continued
Intensity Range (mcd)
Color Bin Min. Max.
E 7.6 12.0
F 12.0 19.1
G 19.1 30.7
H 30.7 49.1
I 49.1 78.5
J 78.5 125.7
K 125.7 201.1
Green/ L 201.1 289.0
Emerald Green M 289.0 417.0
N 417.0 680.0
O 680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S 4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
Maximum tolerance for each bin limit is ± 18%.
Tolerance for each bin limit is ± 0.5 nm.
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
Mechanical Option Matrix
Mechanical Option Code Definition
00 Bulk Packaging, minimum increment 500 pcs/bag
01 Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag
B2 Right Angle Housing, even leads, minimum increment 500 pcs/bag
UQ Ammo Pack, horizontal leads, in 1K minimum increment
10
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
September 17, 2001
Obsoletes 5965-6165E
5988-2149EN