FEATURES
●Surge overload rating -220~350 amperes peak
●Ideal for printed circuit board
●Reliable low cost construction utilizing
molded plastic technique
●Plastic material has U/L
flammability classification 94V-0
●Mounting postition:Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 30 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward (with heatsink Note 2)
Rectified Current @ TC=100℃ (without heatsink)
Peak Forward Surage Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
Maximum Forward Voltage at 5.0/7.5/12.5A DC VFV
Maximum DC Reverse Current @ TJ=25℃
at Rated DC Blocking Voltage @ TJ=125℃
I2t Rating for Fusing (t<8.3ms) I2t A2s
Typical Junction Capacitance Per Element (Note1) CJpF
Typical Thermal Resistance (Note2) RθJC ℃/W
Operating Temperature Range TJ℃
Storage Temperature Range TSTG ℃
NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
2.Device mounted on 100mm*100mm*1.6mm cu plate heatsink.
~ 317 ~
GBU10/15/25 SERIES
A
IR
1.1
I(AV)
-55 to +150
10.0 uA
A
-55 to +150
IFSM
200
70
2.2
500
Rating at 25℃ ambient temperature unless otherwise specified.
REVERSE VOLTAGE - 50 to 1000Volts
FORWARD CURRENT - 10/15/25 Amperes
GLASS PASSIVATED
BRIDGE RECTIFIERS
Dimensions in inches and (milimeters)
SYMBOL UNIT
CHARACTERISTICS
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
GBU
GBU
10
25
350
GBU
15 GBU
25
1510
.874(22.2)
.860(21.8)
.146(3.7)
.154(3.9)
.224(5.7)
.232(5.9)
3.2*3.2
CHAMFER
.720(18.3)
.752(19.1)
.720(18.29)
.680(17.27)
.073(1.85)
.057(1.45)
.035(0.9)
.047(1.2)
.100(2.54)
.085(2.16)
.065(1.65)
.080(2.03)
(5.3)
(4.8)
.210
.190 .190
.210
(4.8)
(5.3) (5.3)
(4.8)
.210
.190
.133(3.37)
.139(3.53)
.091(2.3)
.106(2.7)
.022(.56)
.018(.46)